George Home Wooden dolly highchair User manual

Step 1
Slot the seat (B)
into the groove
on the left side
(A).
Fasten the seat
to the side using
two screws (H).
Step 2
Attach the seat
back (C) to the
highchair side
using two screws
(H).
Cross head / Philips
screwdriver suitable
for use with the screws
provided.
You will need...
1.Unpack the
components
and check
against the list
below.
2.Place the
components
on a clean
surface to
prevent them
from being
damaged.
3.After you have
assembled
your toy,
dispose of all
packaging.
Getting started...
A x1
B x1
C x1
D x2
E x1
F x1
G x1
H x14
You will have... A
B
H
H
C
Wooden dolly highchair
Assembly Guide
IMPORTANT: RETAIN FOR FUTURE REFERENCE
WARNINGS:
• IMPORTANT SAFETY INSTRUCTIONS
• PLEASE READ ALL INSTRUCTIONS CAREFULLY
BEFORE USE AND RETAIN FOR FUTURE
REFERENCE.
• Adult assembly required.
• The hardware contains small screws with sharp points.
Keep unassembled parts out of the reach of small
children.
• WARNING! Not suitable for children under the age of 36
months. Components of this product may break off into
small parts presenting a choking hazard.
• Choking hazard: Unassembled parts may be a choking
hazard to children 3 years and younger.
• To avoid the danger of suffocation, keep any bags
or packaging away from babies and children. Any
packaging or bags are not part of the toy and must be
disposed of immediately before assembling the toy.
• Thisisarole-playtoy.Itmustnotbeusedtotransportor
accommodate children, babies or pets.

Customer services
information
Ifyourequirefurtherinformation,
spare parts or advice regarding
your product, or if you are
experiencing any problems, please
contact customer services at the
telephone number or address
shown opposite. N.B. When calling
orwritingpleasequotetheproduct
name.
Call
0800 952 0101
Write
Asda Stores Ltd.
Asda House, Southbank, Great Wilson
Street,
Leeds, LS11 5AD
Product name:
Wooden Dolly Highchair
How to...
...care for and maintain your highchair
• Your toy is only meant to be assembled once.
• After you have assembled your toy do not dismantle it
again as this may weaken the joints and screws leaving
the toy unsafe for use.
• Regularly check that all of the screws are fully tightened
(butdonotover-tighten).
• Use the toy on a flat level surface only.
• Please check the assembly of the toy regularly and
frequentlytightenanyscrewsorbolts.Ifregular
maintenance is not carried out the product may cease to
function properly.
Step 3
Attach the two rails (D) to the side of
the highchair using two screws (H).
Step 4
Attach the right side (E) to the assembled
sections using six screws (H).
Step 6
Attach the tray (G)
to the assembled
sections using two
screws (H).
Step 5
Stand the highchair
up and slot the post
(F) into the recess in
the front of the seat.
Step 7
After completing
the assembly of the
highchair check all
of the screws are
fully tightened.
Your toy highchair is
now fully assembled
and ready for use.
D
H
H
H
G
F
E
There are many more wooden role-
play toys to purchase and enjoy