George Home 38458B User manual

IMPORTANT: RETAIN FOR FUTURE REFERENCE
38458B
Deluxe Kitchen
Assembly Guide
4
3
12

IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USE AND RETAIN FOR
FUTURE REFERENCE.
Assembly to be carried out by a competent adult only.
• Use under direct adult supervision.
• The hardware contains small screws with sharp points. Keep unassembled
parts out of the reach of small children due to possible risk of injury.
• WARNING! Not suitable for children under the age of 3 years. Components
of this product may break off into small parts presenting a choking hazard.
• Choking hazard: Unassembled parts may be a choking hazard to children 3
years and younger.
• To avoid the danger of suffocation, keep any bags or packaging away from
babies and children. Any packaging or bags are not part of the toy and must
be disposed of immediately before assembling the toy.
• Do not allow children to sit, stand, play or climb on the top surface as this
may cause the product to become unstable.
• Do not use this item if any components are missing or damaged.
Your toy is only meant to be assembled once.
• After you have assembled your toy, do not dismantle it again as this may
weaken the joints and screws, leaving the toy unsafe for use.
• Regularly check that all of the screws are fully tightened (but do not over-
tighten).
• Use the toy on a at level surface only.
• Please check the assembly of the toy regularly and frequently tighten any
screws or bolts. If regular maintenance is not carried out, the product may
cease to function properly.
WARNINGS:
Getting started...
1. Unpack the components and check against the list below.
2. Place the components on a clean surface to prevent them from being
damaged.
3. After you have assembled your toy, dispose of all packaging.
2

3
You will need...
Cross head / Philips screwdriver
suitable for use with the screws
provided.
Please note: We recommend
using 2 sizes of cross head / Philips
screwdrivers. The cam lock xings
shown require a larger screwdriver
head size.
Large screwdriver for securing cam lock xings
Smaller screwdriver for all other screws
Please note...
The following information is important regarding
the cam lock xings used for this product.
When screwing in the cam bolts, please stop
turning as soon as you feel any resistance. These
cam bolts DO NOT need to be tightened fully.

4
Please note...
When tightening the cam
lock mechanism, please stop
turning as soon as you feel any
resistance.
The drawings below illustrate
that you should tighten by
turning just over half a turn.
Tightening any further may
cause damage to the product.
These drawings help illustrate how the cam lock xings work.
The cam lock clasps around the head of
the cam bolt to secure sections together.
OPEN
LOCKED

You should have...
Components
x1
Ax1
Bx1
Cx1 D
x1
Ex1 Fx1 Gx2 H
x1
Ix1
Jx1
Kx1
L
x2
Mx1 Nx1
Ox1 P
x1
Qx1 Rx1 Sx1 T
x1
Ux1 Vx1
W
4
3
12
5

x19
You should have...
Components and xings
Step 1
B
x19x7
WIDE
19mm
x6
24mm
x2
8mm
x3
THIN
19mm
x1 x2
6

7
A
Step 2
Step 3
C
B

8
Step 4
Step 5
C
D
A

9
Step 7
Step 6
F
G

10
4
3
12
Step 9
Step 8
H
H
E
1
2

11
THIN
19mm
Step 10
J
I
Step 11
I
THIN
19mm

12
Step 13
Step 12
P
S

13
Step 14
P

14
Q
Step 15

15
R
Step 16

16
S
Step 17

17
T
Step 18

18
Step 20
Step 19
U
V

19
Step 21
V

20
4
3
12
Step 22
24mm
24mm
I
24mm
24mm