Geoscanners AB GPR User manual

Geoscanners AB®
GPR Survey Trailer Usage
Please follow the instructions below to assemble and use the GPR survey trailer in
the field.
Step 1
Set rear part on the ground with the antenna holders looking upwards
GEOSCANNERS AB® © Geoscanners AB, 2008
Glimmervägen 3, S-961 46 Boden, Sweden Rev. 061108016E
http //www.geoscanners.com

Step 2
Insert the antenna holders into the antenna holder connectors
Step 3
Make sure both antenna holders are firmly attached and secured
GEOSCANNERS AB® © Geoscanners AB, 2008
Glimmervägen 3, S-961 46 Boden, Sweden Rev. 061108016E
http //www.geoscanners.com

Step 4
Rear part with antenna holder ready for antenna insertion
Step 5
Insert the antenna into the antenna holders
GEOSCANNERS AB® © Geoscanners AB, 2008
Glimmervägen 3, S-961 46 Boden, Sweden Rev. 061108016E
http //www.geoscanners.com

Step 6
Fasten the antenna to the antenna holders
Step 7
ttach the trailer coupler to the hitch ball
GEOSCANNERS AB® © Geoscanners AB, 2008
Glimmervägen 3, S-961 46 Boden, Sweden Rev. 061108016E
http //www.geoscanners.com

Step 8
Insert the antenna holders into the front antenna holder connectors
Step 9
ttach the control cable and the survey wheel cable
GEOSCANNERS AB® © Geoscanners AB, 2008
Glimmervägen 3, S-961 46 Boden, Sweden Rev. 061108016E
http //www.geoscanners.com

Step 10
Pay particular attention to the arrangement of the survey wheel cable
Now your GPR survey trailer should be ready to use. If in need of advise please do
not hesitate to contact us at Geoscanners B. Have a successful survey!
GEOSCANNERS AB® © Geoscanners AB, 2008
Glimmervägen 3, S-961 46 Boden, Sweden Rev. 061108016E
http //www.geoscanners.com