Geovent CERA User manual

IBM Multimedia Kit for RS/6000 Setup Procedure
System Requirements
The Ultimedia Video Capture adapter must be installed in your system (enter lsdev
-Ps pci).
WorkGroup Conferencing for AIX or Ultimedia Services for AIX must be installed on
your system (enter lslpp -aL | grep WorkGroup or UMS ).
One of the following RS/6000 workstations configured with AIX Version 4.1.5 or
higher, graphic display adapter, keyboard and mouse: 7248, 7043, or 7025 Model
F40.
A graphics adapter with multiple hardware colormaps is required to enhance color
quality of multiple, simultaneous video windows and to prevent color palette flashing.
RS/6000 graphics adapters with multiple color maps include the following POWER
GXT families: 200P, 500P, 800P, 1000P, and 3000P.
Unpack The IBM Multimedia Kit for RS/6000
After you unpack your IBM Multimedia Kit for RS/6000, make sure you have the following
items available during the setup procedure:
Amplified speakers with integrated audio cables, and a power transformer.
Video Camera with integrated microphone and video cable, a power transformer, and
a Video Camera User Manual.
The following items are recommended, but not required:
– Access to online help for WorkGroup Conferencing for AIX or documentation for
Ultimedia Services for AIX.
– User's Guide for your system unit.
Contact your authorized reseller or marketing representative if any items are missing or
damaged.
Connect the Speakers to the System Unit
1. Place the speakers where they are to be used.
2. Connect the cable from the left speaker to the right speaker.
3. Connect the cable from the right speaker to the audio output or headphone jack at the
back of the system unit.
4. Connect the speaker power transformer to the back of the right speaker, then plug the
speaker power transformer into an electrical outlet.
1 Left Speaker
1 Right Speaker
34
2
Speaker Controls
Right Speaker
3
2
11. Power on LED is green when power is on.
2. Power/Volume control knob.
3. Tone control knob.
IBM Multimedia Kit for RS/6000 Setup Procedure 1
All manuals and user guides at all-guides.com

Connect the Video Camera to the System Unit
1
5
4
2 (White)
3 (Yellow)
1. Place the camera where it is to be used. Attention: If the video camera is located too
close to the speakers you may experience feedback through the speakers or the inte-
grated microphone.
2. Connect the white audio jack to the line input connector.
3. Connect the yellow video jack to the Ultimedia Video Capture adapter.
4. Connect the video power jack to the video AC power transformer, then plug the AC
power transformer into an electrical outlet.
5. Slide the video camera power switch to the 'On' position. Refer to the Desktop Video
Camera User Manual for additional operation instructions.
Verify Your Setup
If You Have WorkGroup Conferencing for AIX Installed:
1. Enter WorkGroup Conferencing for AIX
From the desktop, select the Application Manager Icon ( ) then select
Workgroup Conferencing - or - type wgc on the command line.
2. Test the camera
At the bottom of the My Video Window, click on the arrow to start the video. You
should see the image from the camera. Click the box to stop the video.
3. Test the Speakers and the Microphone
Select Tools, then Audio Tuning.
Select Test Speaker to make sure the speakers are working.
Select Monitor Microphone and talk into the microphone to ensure it is working.
If You Have Ultimedia Services for AIX Installed:
1. Test the Camera
From the desktop, select the Application Manager ICON, ( ), select
Multimedia, then select VideoMonitor - or - type video_monitor on the command
line.
You should see the image from the camera. Close the window.
2. Test the Speakers and the Microphone
Select CaptureEditTools, then AudioEditor - or - type audio_editor on the
command line and press the enter key.
Select Options, Input Device, and Line-In.
Select the record ( ) button. Record a test message and press the stop ( )
button.
You should see a new wave diagram in the Play Segment panel. (If not, your
microphone does not work.)
Select the play ( ) button to hear the message and verify the speakers are
working.
\ð8L1489\
2Multimedia Kit Setup Procedure
All manuals and user guides at all-guides.com