GeoVision GV-B600LZ User manual

GV-B600LZ Brackets
The GV-B600LZ Brackets are required for installing the GV-ML600 electromagnetic lock on
in-swing doors. The L bracket is used to mount the magnetic GV-ML600 lock body on the
door frame above the door and the Z brackets attach the magnet faceplate to the door.
Packing List
1. L-Z Brackets for magnetic lock x 3
Z Bracket x 2
L Bracket x 1
2. M8 (35 mm) screw + black rubber spacer x 1
3. M5 (5 mm) screw x 6
June 22, 2015
1
Note: To install the GV-B600LZ brackets, you will need to use the lock body, magnet
faceplate, inner hexagon wrench and galvanized steel rivets, which are parts supplied with
the GV-ML600 electromagnetic lock.

Dimensions
zL Bracket
(Unit: mm)
zZ Bracket (A)
June 22, 2015
2
zZ Bracket (B)
(Unit: mm)

Installation
1. Attach the L bracket on the door frame above the door using four screws.
Note: You have to self-prepare the four screws.
2. Take the lock body from GV-ML600 electromagnetic lock, remove the two aluminum
plugs on the side, and unscrew the screws inside.
June 22, 2015
3
3. Remove the mounting plate from the lock body.

4. Attach the lock body to the L bracket and secure the mounting screws from step 2 using
the inner hexagon wrench that comes with the GV-ML600.
5. Place the two aluminum plugs back into the mounting screw holes.
6. Mount Z bracket (B) onto the door by tightening four screws.
June 22, 2015
4
Note: You have to self-prepare the four screws.

7. Place the magnet faceplate from the GV-ML600 on the Z bracket (A) and insert the
supplied M8 (35 mm) screw and black rubber spacer to the hole in the center. Insert the 2
galvanized steel rivets that come with the GV-ML600 toward the edges of the magnet
faceplate.
Magnet
Faceplate
Z Bracket (A)
Z Bracket (B)
June 22, 2015
5
8. Place Z bracket (A) with the magnet faceplate on Z bracket (B) and insert the supplied
M5 (5 mm) screws. Before tightening the screws, adjust the position of the Z brackets so
that the magnet faceplate contacts the lock body.

June 22, 2015
6
The L-Z brackets should look like the illustration below after installation is completed.
Specifications
Holding Force 272.15 kg (600 lb)
L bracket 250 x 48 x 30 mm (9.8” x 1.9” x 1.2”) Dimensions
(L x W x H) Z bracket (x 2) 185 x 50 x 50 mm (7.3” x 2.0” x 2.0”)
Weight (3 brackets) 750 g (1.65 lb)
Material aluminum
All specifications are subject to change without notice.