Ger Detect RIVER F SMART User manual

•Section 1:
Critical Warning
•Section 2:
Overview
•Section 3:
Definition of the main unit buttons & LEDs
•Section 4:
The device features and specifications
•Section 5:
RIVER F SMART parts assembly
•Section 6:
RIVER F SMART device operation steps
•Section 7:
The device parts and accessories
•Section 8:
The technical specifications
INDEX
1

- Please make sure that all precautions are taken against risks.
- Do not use your device while it is raining.
- Turn on the device after you make sure that all parts are in place and
connected.
- Make sure that the device battery is fully charged before you start
searching.
- If the indicator on the side of the device starts flashing, turn off the device
and recharge the battery.
- When the battery will almost expire, the device will automatically turn off.
- It is recommended to read the user manual before starting on the device to
avoid mistakes through the search.
- Be aware of (energy sources - phone networks - metals - mobile phones -
electronic devices), and do not use any charger other than the original one.
- The device’s main unit is under a two-year warranty against all electronic
breakdowns, any damages caused by user errors (falls, opening the main
unit, hits, harms, etc.) are not covered within this warranty.
- Battery and charger are not under warranty.
- You should strictly follow the instructions in this user manual to minimize
faults and to use your device correctly.
- If the device is not used correctly, or there is a high noise rate, in these
cases the device will not be capable of confirming the target and determining
the depth.
We wish you all the best of luck in your search……
Critical Warning
2

Dear customer,
“Thank you for choosing RIVER F SMART”
✓It has been completely developed into a RIVER F SMART device with the
addition of more systems and the development of new characteristics,
and new professional techniques in finding water resources from long
distances with high accuracy and determining the depth with ease and
accuracy.
✓RIVER F SMART is a multi-functional device for searching underground
water, water wells, and water layers.
✓Searching for fresh water and salty water.
✓The RIVER F SMART device depth search is 500 meters underground and
the front range is 3000 meters.
✓The device works in six languages: German - English - French - Spanish -
Portuguese –Arabic.
✓The RIVER F SMART device is one of the best German manufacturers.
It has the European CE certificate according to international specifications
and the international ISO 9001 certificate according to international
specifications and standards.
✓This device is designed to be compatible and functional in all countries
and regions.
(Overview)
3

Definition of the main unit buttons & LEDs
Super antenna
Enhancer antennas
Recipient antenna
The device handle
Charge indicator : It lights up intermittently
when the battery is about to run out.
Charge input
4

The device features and specifications
The RIVER F SMART device has multiple features to search for
groundwater, water wells, and water sources underground:
-Super speed in finding and locating water sites.
-The system for determining the target depth easily and accurately.
-The system for specifying the continent in which you search.
-A screen that supports the touch system which contains many
advantages and features.
-An electronic thermometer within the device screen that measures the
weather temperature.
-A digital clock
-The possibility of muting and activating the device's sound.
-Super Antenna which enables the device to cover large areas of
research.
-A radar search dish to receive and improve the signal.
5

RIVER F SMART device parts connection
Install the device handle
Install the Super Antenna
Install enhancer antennas
Install recipient antenna
6

RIVER F SMART device operation steps
Turn on the device
by pressing the
power button for
two seconds
After turning on the device, the following data will appear on the main
screen:
Battery level indicator - clock - temperature - activate and mute
button.
7
Power Button

1- Settings icon:
It contains the working
languages of the device, which
are:
German - English - French -
Spanish - Portuguese - Arabic
Device settings icon through
which you can set:
Sound level - brightness level -
time settings - device
information
Locate and choose the continent
icon you want to search in.
This unique feature was added
due to the different frequencies
of underground water from one
continent to another.
8

2- Search options:
Choose the type of target you want to search
underground.
Determine the front range of the device.
9

3- Search icon:
When you press the search icon, the device will directly start
searching, depending on the preset settings saved by the
prospector, which are (target type - front range –soil type).
01

You can choose the type of soil in the search area (clay - mineral -
natural - mixed - sandy - rocky).
Then choose the water type you want to search for.
(Example: Freshwater), which also appears on the range-front screen .
Then choose the front range you want to reach (from 100 meters to 500
meters - 1000 meters - 1500 meters - 2000 meters - 2500 meters -
3000 meters) (for example, 500 meters)
11

Example: If the front range of the target to be searched is expected to
be within an area of 500 square meters, it is sufficient to specify the
front range within 500 meters.
But if the front range of the target to be searched is unknown, you can
specify the front range up to 3000 meters.
Note: The explorer must stand facing north to south.
The ionic fields are radiation emitted by underground water, water
wells, and water layers after being underground for a long time.
They overlap and interact with the soil, the nature of the earth’s
formation, and its regularity with magnetic lines to the north and south.
12

The balance of the device must be maintained during the search by fixing
the grey dot in the middle of the circle icon.
The device will start sending and receiving signals directing you towards
the target with a continuous sound.
When getting any signal, the device will directly turn towards the target
with the target direction indicator appearing on the screen and the sound
accelerating.
Confirm the direction of the target from all four directions to ensure that
the target is reached more precisely.
13

Follow the signal and when the device turns back you will have passed
the target
Limit the search site by placing a mark that will be the center for target
confirmation.
Then confirm the location of the target from the four directions (from
south to north - from north to south - from west to east - from east to
west).
When standing above the center of the target, the device will rotate
directly above the target.
North to south
South to north
East to west
West to east
14

After you have confirmed the location of the target, click on the
depth button to determine the depth and then move away from
the center of the target a distance of at least two meters.
Point the device towards the target while maintaining the
balance of the device, press the start button, wait until you hear
a beep from the device, then walk towards the target until the
device rotates backwards with the appearance of an icon
indicating the rotation of the device towards the back.
15
Start

Turn in the opposite direction, press the start button, wait until
you hear a beep emanating from the device, and the icon shifts
from the rotation position to the forward position, then walk until
the device rotates backwards, the device will analyze and show
the final results automatically.
16
Start

Important Note: The ratio to analyze the results in the RIVER F SMART is as follows:
If the result of the noise is high and the target confirmation rate is low:
The device does not give depth, it is rather to retry the search again.
If it gives us depth and the noise percentage is greater than 30% It is preferable to try the
search again.
if the target confirmation rate is less than 90%, try the search again.
- In the case that the depth was re-determined on the same target, and a difference in
depth appeared between the first and second depth-determination process because of the
different coordination of walking steps towards the target to determine the depth.
The following results and conditions will appear on the device screen when
confirming the presence of a target:
Noise Ratio: It is the percentage of noise in the search area, which results from
the proximity of (energy sources - phone networks - metals - mobile phones -
electronic devices)
Confirm Target: the percentage of confirmation of the presence of the water in
the search area.
Depth: The depth within which the water is likely to be located.
Example: The depth is between 82 cm to 96 cm.
Note: Water can be found at a depth less than the depth displayed in the search
data final results.
The device is designed to detect and give the depth of the biggest water quantity.
Noise 11%
-Target confirmation 93%
17

The device parts and accessories
A carrying and protective device
case made of shock-resistant
plastic
The main unit of the device
The device handle
The device charger
The car charger
Super antenna
Enhancer antennas
Recipient antenna
81

The technical specifications
RIVER F SMART Technical Specifications
Audio Output
Dynamic speaker frequency range:350~5500 Hz
sound output: 84 ± 3dB
Liquid Crystal Display (LCD)
Touch screen full color 480 x 272 px
Length
Device: 218 mm
The device with a super antenna of 388 mm
The device with a golden antenna of 462 mm
Frequency
3.2 _ 18 KHz
Data processing speed
180 MHz
Operating Temperature Range
0 C° to 70 C°
Operating Humidity Range
Up to 95 % non-condensing
Storage Temperature Range
-20C° to 70C°
Storage Humidity Range
Up to 98 % Relative Humidity
Operating Time
(27 Wh Battery)
10 Hours
Waterproof Rating - Detector
Not waterproof (weatherproof only)
Li-ion Battery Technical Specifications
Type
Li-ion Rechargeable Battery - internal Battery
Output Voltage
Li-ion 3.6 VDC
Capacity
Li-ion 27 Wh
Run Time
10 Hours
Battery Operating
Temperature
0 C° to 50 C°
Battery Storage Temperature
-5C° to 70C°
Li-ion Battery Charger Technical Specifications
Operating Temperature
0 C° to 50 C°
Storage Temperature
-30 C° to 80 C°
Input Voltage
90 →250 VAC 50→60 Hz
USB Output Current
5VDC / 2100 mA
Other Technical Specifications
Total weight
4865 g
Device weight
592 g
Battery weight
130 g
Bag weight (empty)
3730 g
Bag dimensions
530 mm x 400 mm x 228 mm
19