Gevi GEBLA089-N User manual

GEVI PORTABLE BLENDER
MODEL： GEBLA089-N

BEFORE USING
Prior to using this appliance, please read the user manual thoroughly, even in cases, when one
has already familiarised themselves with previous use of similar types of appliances. Only use
the appliance in the manner described in this user's manual. Keep this user manual in a safe
place where it can be easily retrieved for future reference. We recommend saving the original
cardboard box, packaging material, purchase record from Amazon and responsibility statement
of the vendor and warranty card for at least the duration of the legal liability for unsatisfactory
performance or quality. In the event of transportation, we recommend that you pack the
appliance in the original box from the manufacturer.
Once you receive this product with any damage or you are not satisfied with this product, please
keep the original package in a good condition and make sure the product without any damages,
and then contact our after service Email to get a replacement or refund directly.
Please kindly contact with us in advance before you make any decision
on your amazon buyer account.

TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS
DESCRIPTION OF THE PORTABLE BLENDER
BEFORE FIRST USE
USING THE PORTABLE BLENDER
CLEANING AND MAINTENANCE
RECIPES
TECHNICAL SPECIFICATIONS
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT
GUARANTEE POLICY
1
5
9
9
14
15
25
25
26

IMPORTANT SAFETY
INSTRUCTIONS
When using the electrical appliance, the below basic safety precautions should be
followed:
1.Please read the instructions carefully before using this product.
2.When the product is working, it is strictly forbidden to open the blender
and touch movable parts such as blades and motors, so as to avoid injury or
damage to the product.
3.Do not open the blender, until the blade has stopped rotating.
4.Do not disassemble or alter the product by yourself.
5.Never run the appliance under empty condition (i.e. no food in juice cups).
6.Do not place in or near flammable gases, electric stoves, or in hot ovens.
7.Do not immerse the power adapter and motor combination in water or
other liquid to avoid the risk of fire, electric leakage or personal injury.
-1-

8.Do not place the product in high temperature, strong magnetic field,
flammable and explosive gas (such as natural gas, methane, etc.)
environment to avoid causing accidents such as abnormal operation or fire.
9.Do not put any parts of this product in a dishwasher, microwave oven,
disinfection cabinet or hot water over 60 ℃, or use other equipment to heat
the product, in order to avoid parts deformation or damage.
10.After using the product, please clean it in time, wash the parts which are
contact with food with clean water. Please be careful of the sharp blades
when cleaning, so as to avoid cutting (you can wear protective gloves).
11. After charging, pull the plug our by grabing the plug. Do not pull the wire.
12.Appliances can not be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge unless they have
been given supervision or instruction concerning use of the appliance in a
safe way by a person responsible for their safety.
13.This appliance shall not be used by children. Keep the appliance and its
cord out of reach of children.
-2-

14.In the absence of supervision, the cleaning and maintenance work
should not be done by the children.
15.Close supervision is necessary when the appliance is used by or near
children.
16.Avoid touching moving parts.
17.Warn of potential injury from misuse.
18.Stirring ingredients such as bananas that are prone to foam may cause
the product to blockage.
19.Use of accessories not recommended or sold by the original
manufacturer may cause risks of fire, electric leakage or personal injury.
20.If the supply cord is damaged, it must be replaced by the manufacturer or
its service agent or a similarly qualified person in order to avoid a hazard.
21.This equipment must be used in accordance with the instructions, and
must not be used for other purposes.
22.Before using, please make sure that the mainframe is firmly fixed.
23.Never attempt to shield the safety interlock of the main engine.
-3-

24.Please keep this manual for future reference.
-4-
NOTES ON THE CORD PLUG
The product has built-in lithium batteries. Pay attention to the following items:
1.Store and use this product in an environment of 0-40℃.
2.If not used for a long time, please charge every three months to prevent battery damage.
3.Charging speed may be slower in the environment below 10℃, which is a normal
phenomenon.
4.Please charge the battery in time when the power is insufficient.

DESCRIPTION OF THE PORTABLE BLENDER
Portable Design
Super lightweight design with a portable size of 300ml, this cordless portable blender is as
compact as a normal water bottle. You can put it in your bag, backpack or take it in your hand at
any time, which is very perfect for office, home, travel and sport with on-the-go portability.
Easily double-click, shake and blend, a delicious fresh juice is ready.
Magnetic Suction Charging
The magnetic suction charging cable is suitable for a variety of charging methods with USB
interface, so you are able to recharge this portable blender at anytime with mobile power, car
adaptor, Power bank, AC adaptor etc. With this unique magnetic contact charging, no more
worry about any charging problem.When using the plug to charge the blender, there are no
special requirements on the plug voltage and other parameters.
Food-Grade Materials and BPA-Free
With FDA approved baby food grade, 100% free of BPA.This portable blender consist of non-
toxic, eco-friendly Tritan Material and SUS 301 stainless steel Blade, which is perfect for
making a delicious fresh juice, fruit smoothie, milkshake and so on.
-5-

Double Safety Protection with Separation Automatic Shut-off
This portable blender has a separation auto shut-off function(cup lid magnetic induction). If the
main unit is placed separately or the juice cup is not rotated and installed, the product does not
work. And Double-click the button switch for start can avoid touching the switch accidently.
Easy to Clean and Safe to Use
This portable blender design with IP68 Waterproof which makes it easier to clean, you are able
to wash the juice cup and the blade on the main machine with water directly. For the purpose of
safety, the concave design of the stainless steel blade inside the blender helps you avoid being
cut while cleaning.
-6-

PRODUCT INTRODUCTION
-7-
CHARGING MODE:
A)When the adapter is connected, the LED indicator light is red.
B)When full of electricity, the LED indicator light is white.
For the first time, please make sure to charge the blender for more than two hours to extend the
battery life. (Even the white light shows it's full.)

WORKING MODE:
There is only one switch unit. The specific functions are as follows:
A)Double-click the button switch, the white light of the LED indicator lights up, then the product
runs at full speed. When the working voltage is lower than 7.2V, the indicator turns to red light
and flashes three times, then the machine stops running. If the indicator light flashes during the
work, it means that the battery is fast exhausted.
B)If the stall occurs during operation, the product will stop immediately and the white light of
the indicator will start to flash. During the process of flashing the indicator light, in order to
protect the control board, the product will not respond even pressing the button switch.
C)During the working process, press the button switch, and then the portable cup stops
running.
D)The red light is always on during the charging process, and the white light will display after
the charging process. The portable cup with full power can squeeze up to 10 cups of juice, and
the main engine can be operated continuously for 5 times (each program is set to 40 seconds),
each interval is not less than 3 minutes, and rest is required after 5 times.
-8-

BEFORE FIRST USE
This is a potable blender designed for on the go, different from the countertop blender. For the
first use it is suggested operating according to the below steps:
1.Unpack the appliance and place all parts on a horizontal surface.
2.Before using this product for the first time, it is recommended that you should clean the juice
cup and the blade on the main machine with water and dry these parts thoroughly. The main unit
should be wiped with a damp cloth instead of soaked with water.
USING THE PORTABLE BLENDER
1.Before using the product for the first time, please ensure that the battery is fully charged and
thoroughly clean the blender. This product has double safety protection, if the main unit is
placed separately or the juice cup is not rotated and installed, the product does not work and
the LED indicator light is white and flashing when you press the button switch. Only when the
main unit and the juice cup are rotated and fixed in place, you can double-click the “button
switch” to start the work, and the working status indicator is white. The details will be described
in the following.
-9-

Note:
1.Please remove all hard seeds before juicing.
2.It is not recommended to process coconuts or similar hard foodstuffs, since this may
damage the main engine.
3.It is not recommended to process hard fruit or vegetable rich in fiber and starch, such
as sugarcane.
4.The peel and pits should be removed from oranges, lemons, grapefruits and melons.
5.If you want to blend ice, please make sure the ice cubes are 1*1*1cm in volume and add
liquid before blend.The ice you add should not exceed six grains.
-10-
2.The fruits (apples, pears, etc.) shall be washed, peeled and nucleated, and cut into squares
of about 1 cm * 1 cm * 1 cm.

3.Put the prepared fruits into the juice cup, add water, milk or other liquids according to your
preference. The total amount of food and liquid should not exceed the maximum mark (300mL)
of the cup.The maximum mark is covered by the rubber pad.
4.Rotate and install the main engine on the juice cup. The main engine and the juice cup should
be tightened and installed in place to ensure that the juice will not leak out.
-11-

-12-
5.Turn the product upside down, then double-click the “button switch” on the product
mainframe in a quick way, put it on the desktop or hold it in hand, then the product starts to
work. The product sets a single cycle time of 40 seconds. In the process of work, shake the
blender upside down to keep the material from stucked on the blade, so that the mixing effect is
better and the taste of juice is more delicate.
Note:
1.During the working process, click the "button switch" once, the blender will stop
working immediately.
2.If the blade is stuck at the start of work, you can place the blender upright, and place it
upside down after it works normal.
3.When in use, tighten the main engine and juice cup to align the two points, otherwise
the juice cup will not start properly.

-13-
6.After mixing and making the juice, rotated out the main machine from the juice cup, and the
juice in the juice cup can be directly drunk.
7.Insert the magnetic suction charging cable into the DC5V/1A standard USB plug, and attach
the magnetic suction head of the charging wire to the magnetic suction joint of the main engine
to charge the product. The LED indicator is red when you charging the blender, and after
charging, the indicator will turn to white. The product will not work during the all charging
process. If the red light does not work during charging, please check whether the charging
cable is placed properly and ensure to use the cable made by the regular manufacturer.

-14-
CLEANING AND MAINTENANCE
1.Make sure the blade has stopped running before cleaning.
2.Do not use steel ball, abrasive cleaner or corrosive liquid (such as gasoline, acetone) to clean
this product.
3.The main unit can be wiped with a wrung wet cloth. Do not rinse, soak or spray the main unit in
water or other liquids to avoid causing damage to the device or product leakage.
4.Use clean water to rinse the inside of the juice cup and the parts which are contacting with
food, and wipe dry or airing them in time. Please operate carefully to avoid cutting (protective
gloves can be worn) during the cleaning process.
5.When storing the portable blender, please ensure that the product has already cleaned and
dried, then place it in a dry, ventilated place to avoid direct sunlight.
6.Fast Cleaning Process: Add appropriate amount of water into the juice cup and install it on the
main engine. Double-click the "Button switch" to start the product and work for 5 to 10 seconds.
Caution: The blender can not be pasteurized in the disinfection cabinet.

-15-
RECIPES
Strawberry Lemon Juice
Strawberry ...................... 90 g
Lemon juice ................... 3 ml
Pure water .................... 200 ml
1.Wash and stem the strawberries.
2.Put all the materials into the blender and
then start the machine and mix well.

-16-
Banana Mango Smoothie
Banana ..................................30 g
Mango ...................................30 g
Yogurt ...................................90 ml
Ice ........................................18 g
Honey .....................................6 g
1.Peel bananas and cut into small pieces,
peel and core mangoes. Then, refrigerate
bananas and mangoes until firm.
2.Put all the materials into the blender and
then start the machine and mix well.

-17-
Blueberry Banana Milk
Blueberries ..................................5 pieces
Banana ....................................... 1/4 root
Milk ..............................................100 ml
1.Wash the blueberries. Peel the bananas and
cut into small pieces.
2.Put all the materials into the blender and then
start the machine and mix well.