GEYA GRT8-WS User manual

-1-
Instruction Manual
GEYA ELECTRICAL CO.,LTD
Add:Wenzhou Brige Industrial Zone,Beibaixiang Town,
Yueqing,Zhejiang,China 325603
E-mail:[e-mail]
Web:www.geya.net
WiFi time-control relay GRT8-WS
General
Applications
-It turns on and off the load periodically and regularly, and usually controls
household equipment such as lights and appliances.
 Function Features
-Support access to Tuya's App Tuya smart.
-The on and off time of the load can be conveniently set through the App.
-On and off can be controlled manually.
-The cycle on / off can be set during the on time.
-1-MODULE,DIN rail mounting.
Model and connotation
Technical parameters
GRT8
GTS8 Series
WS
WiFi time-control relay
1.Install App
You can scan this QR code to download Tuya Smart, or search for Tuya Smart
in the App store to download this App.
Networking settings
GRT8-WS
AC/DC 110-240V 50Hz
A1-A2
-15%;+10%
±30s
500mW
1×10
-20℃ ~ +55℃
-35℃ ~ +75℃
IP20
APP
red LED
AC 0.09-3VA/DC 0.05-1.7W
5
1×10
90mm×18mm×64mm
62g
GB/T14048.5,IEC60947-5-1,EN 61812-1
1×2.5mm 或 2×1.5mm 0.4N·m
Function
Supply terminals
Voltage range
Burden
Supply voltage tolerance
WiFi time-control relay
Supply indication green LED
Time setting
Time deviation
Output 1 SPDT×
16A/AC1
Min.breaking capacity DC
Output indication
Mechanical life
Electrical life(AC1)
Operating temperature
Storage temperature
Mounting/DIN rail
Protection degree
Operating position
Pollution degree
Dimensions
Weight
Standards
Overvoltage cathegory
Din rail EN/IEC 60715
any
N240:AC/DC110V-240V
Rated control supply voltage:
APP download
QR code
Relay output
indicator
ON/OFF
WIFI configuration
WIFI status
indication
( )
~
( )
~
A1
A2
R
16 18
15
Panel Diagram
Wiring Diagram
GRT8-WS
Un:AC/DC110V~240V 50/60Hz
:16A 250VAC
WI F I time-control relay
NOTE：Download APP to set time-control relay.
GR T8-W S
R
15 16 18
A1
A2
( )
~
( )
~
A1
A2
R
16 18
15
WI F I
GR T8-W S
R
WIFI
1516 18

151618
15 16 18
-2-
Dimensions(mm)
3.Connect WiFi
Make sure the phone is connected to WiFi.Open the app and click
the add device button to complete the device addition according to
the prompts.When the device is added, the main interface of the
App will display the device icon, and the WiFi indicator of the
device will be on. You can control the device through prompts.
4.Other setting
You can change the name of the device in the App to facilitate
management.The load can be turned on and off regularly through
the mobile phone App, and the load can also be controlled remotely
through the mobile phone.
You can control the on / off of the load through the buttons on the
equipment, and the ON / OFF indicator shows the on status of the
equipment.
Disconnect the load Connect the load
95
4.2
GRT 8-W S
R
15 16 18
A1
A2
2.Add device
First use, or if you need to restore the factory condition,You need
to press and hold the power button for 5 seconds, and the device
will enter the distribution network state. At this time, the WiFi
indicator is flashing.
5s
Offline status Distribution network status
Disposal of Electrical Waste
All electrical waste should be
disposed of in compliance with
current WEEE regulations.
Caution
The products must be installed by qualified electricians. All and
any electrical connections of the time relay shall comply with
the appropriate safety standards.
LED
AC220V
~
~
Wiring diagram
AC220V
~
~
Load≤16A（AC-1）。
Load＞16A（AC-15）。
LOAD
5.Reconfigure WIFI
1. If you don't use this device, you can delete it in the app and it will
restore its factory settings. At this point, you can add this device
again through the App.
2. You can press and hold the button for 5 seconds at any time, and
the device will re-enter the WIFI configuration state. At this point,
you can add this device again through the App.
5s
Online status Distribution network status