GGM gastro GKK1 User manual

Gas Style Burner
Instruction Manual
GKK1
Thank you for choosing our products, before using of the equipment,
please read the Instruction Manual carefully and operates strictly
according to the instruction.
This series products is our latest product: its body is made of stainless
steel, smooth appearance is designed as European style. It’s easily to
operate, energy saving and environmental protection.
1. General Attention
A. The product’s installation, first time use and maintenance
should be operated by professionals.
B. Please read the following instruction carefully and do the
installation or repair strictly in accordance with the instruction.
C. Please keep this manual carefully for any future doubt .
D. When remove the outer packing you should ensure the integrity of
the machine, if you have any questions, please do not use the machine,
and promptly consult relevant experts.
E. Turning the gas switch off when you don’t use the machine or
the operator is absence in order to avoid danger.
F. Please ask the professionals to repair the equipment and use the
original accessories, it may endanger the safety performance of the

2
machine if you don’t follow the requirements.
G. The appliance can only apply to commercial use, rather than
any other purposes in case of any dangers occurred.
H. Don’t wash the equipment by water directly.
I. To ensure smooth surface, you should clean the stainless steel
surface regularly to prevent oxidation and chemical actions destroy
the equipment.
2、Installation Instruction
These instructions are only valid of the country code appears on the
appliance. If the code does not appear on the appliance, please consult
relevant professionals.
2.1Technical Features
Structure：
Better seal, do not leave any food residue.
All surfaces are closed and sealed, and with no chance of leaking
wastes
High-pressure casting burner, it can stabilize the fire by itself.
The nozzle can be replaced to satisfy the different gas used.
Bore of the appliance is made of high-quality stainless steel plate.
And the bore is rounded with high-density glass fiber, so it keep
warm for long time.
Oven gate is made up of double-glass fiber and has a good

3
insulated capability. The surface of the gate is made of stainless
steel.
High-quality iron oxidation burner
2.2 Basic Parameters
Name
Gas Style Range With One Burner
Model No.
GKK1
Power
10KW
Number of Burner
1
Dimension（mm）
500*500*510
2.3 Installation Requirements
The installation of equipment and conversion of gas must have the
professionals to do in accordance with the regulations
Please keep the distance between the equipment and the wall
about 10 cm. If the equipment must be installed on the wall, please
ensure the wall is anti-fire.
The equipment should be installed at a well-ventilated place, and
the exhaust fan should be installed so that the steam and the flue can
be discharged out.
The equipment should be placed on a platform after the
installation. Do not make the equipment inclined and do not move it
when working.

4
Don’t use the fuel gas that not meet the equipment and high
voltage regulator (Low voltage regulator is only suit for this
equipment.)
2.3Gas Connection
It is recommended that one valve which can cut off the gas supply
immediately be installed on the gas supply system before appliance.
Use suitable hose and regulator to connect with the appliance in
accordance with the regulations in local authorities.
Use the appropriate gas and pressure based on the technical
parameters in the instruction manual.
Please use soapy water to check the gas connection between gas
hose and appliance to make sure no gas leakage occurred.
Attention: Light flame to check leakage is forbidden.
3. Maintenance
In order to extend the life span, please clean the surface and oil box
regularly. Attention, cleaning these places at normal temperature.
If you leave the equipment for long time, clean the stainless steel
surface using soaked cloth, then put it in ventilate place.
Clean stainless steel surface with warm soap water everyday, then dry
it completely.（never wash the equipment by high-handed gun
directly）
Do not use brush, scraper or the detergent which includes kernel or

5
cusp (bleach, hydrochloric acid) to clean the stainless steel surface.
Do not use corrosive material to clean the ground under the
equipment.
Do not change the ventilated space that the equipment working need.
Make sure the equipment is put in ventilated place.
Above 90% of the unit is made of metal (stainless steel, iron,
aluminum, electroplate panel), so these material could be reused
4、Using Instructions
Make sure the knob in closed state, press the anti-clockwise to
“★” position; hold down the knob to fire the minimum burner, press
the electronic igniter at the same time. Press down the knob for 20
seconds and check the burner burning or not from the rendering
window. When you release the knob, the burner should be burn, if
not, please do the operation above again until the burner gets to burn.
If the equipment does not be used for a long time or is used for the
first time, it is normal that it need a longer time to get burn (about
1-2 minutes).
When the burner gets burn, rotate the knob by anti-clockwise
direction to “maximum” position (“▼▼” means maximum position)
to ignite the main burner. When the main burner gets burn, the
equipment is ready for working. (If you want the minimum fire,
rotate the knob by clockwise direction to “minimum” position, “▼”

6
means minimum position.)
After using, please turn off the main burner: Rotate the knob from
the maximum or minimum fire flame to position “★” to shut off the
burner.
The way to close the burner: Rotate the knob from “★”to“●”.
When you do not use the appliance, please turn off the valve at
once.
Because there is a gas pipe in the furnace, when you use the
griddle for the first time, please take at least 3-5 minutes to release
the internal gas.
Methods for release the gas：Make sure the knob in closed state,
rotate the knob by anti-clockwise to “★” position; press the knob
for about 3-5minutes.
Attention:
Turn off the gas valve after cooking.
Turn off the gas valve immediately and open the window and door if
gas leak is happen.
If any adjustment or repair needed, please contact your supplier
and ask the professional repairman to do the adjustment and
repair.
Do not put or store any flammable and explosive gases, liquids or
materials on or near the equipment.