GGP ITALY 102 User manual

RIDE-ON MOWER
OWNER’S MANUAL
WARNING!
Read this manual carefully before using the machine.
EN
102-122

1
EN
1. SAFETY .................................................. 3
Regulations for using the machine safely
2. IDENTIFICATION OF THE MACHINE
AND COMPONENTS .............................. 7
How to identify the machine
and its main components
3. UNPACKING AND ASSEMBLY .............. 9
How to remove the packing
and assemble loose parts
4. CONTROLS AND INSTRUMENTS ....... 13
Position and functions of
all the controls
5. HOW TO USE THE MACHINE ............. 19
Contiene tutte le indicazione per
lavorare bene e in sicurezza
5.1 Safety recommendations ............... 19
5.2 Why the safety devices cut in ........ 19
5.3 Preliminary operations
before starting work ....................... 20
5.4 Using the machine ......................... 21
5.5 Using on slopes ............................. 27
5.6 Transporting the machine .............. 27
5.7 Lawn maintenance........................... 28
6. MAINTENANCE .................................... 29
All the information for maintaining
the machine in peak eciency
la macchina
6.1 Safety recommendations ............... 29
6.2 Routine maintenance ..................... 30
6.3 Interventions on the machine ......... 31
7. ENVIRONMENTAL PROTECTION ....... 34
It gives advice on machine use
and respecting the environment
8. TROUBLESHOOTING .......................... 35
A help in quickly solving problems
9. ACCESSORIES ON REQUEST ............ 38
A description of the accessories
available for special requirements
10. SUPPLEMENTARY EQUIPMENT ...... 39
List of equipment that can be
installed on the machine to extend
use possibilities
11. SPECIFICATIONS .............................. 40
A summary of the main specications
of your machine
TABLE OF CONTENTS
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
1. PRESENTATION
Thank you for having chosen one of
our products. We hope that you will get
complete satisfaction from using your new
machine and that it will fully meet all your
expectations.
This manual has been written to help you
become familiar with the machine and use
it safely and eciently. Do not forget that it
is an integral part of the machine, so keep
it close at hand for future reference and
pass it on to the purchaser if you sell the
machine.
Since we regular improve our products,
you may nd slight dierences between
your machine and the descriptions
contained in this manual. Modications
can be made to the machine without no-
tice and without the obligation to update
the manual, although the essential safety
and function characteristics will remain
unaltered. If in doubt, do not hesitate to
contact your dealer. And now enjoy your
work!
INTRODUCTION

2
EN
2. DESCRIPTION OF THE MACHINE
AND ITS RANGE OF USE
This machine is a garden tool and pre-
cisely a ride-on mower.
The machine is equipped with an engine
which drives a cutting unit protected by a
casing, as well as a transmission unit that
moves the machine.
The operator is able to operate the ma-
chine and use the main controls, always
seated in the operator’s position.
The devices tted on the machine stop the
engine and the cutting device within a few
seconds, should the operator behave in a
manner that does not comply with the nec-
essary safety precautions.
Intended use
This machine was designed and built to
cut grass.
The use of special accessories pro-
vided for by the Manufacturer as original
equipment or which may be purchased
separately, allows this work to be done in
various operating modes, illustrated in this
manual or the instructions that accompany
the single accessories.
Likewise, the intended use can be ampli-
ed to include other functions by applying
supplementary tools (if provided for by the
Manufacturer), abiding by the restrictions
and conditions indicated in the instructions
accompanying the equipment.
Improper use
Any other usage not in keeping with the
abovementioned ones may be hazardous
and harm persons and/or damage things.
Examples of improper use may include,
but are not limited to:
– transporting people, children or animals
on the machine or on a trailer;
– towing or pushing loads without the use
of the specic accessory for towing;
– use of the machine for riding over unsta-
ble, slippery, icy, stony, rough, marshy
ground or puddles that do not allow
the consistency of the ground to be as-
sessed;
– use the blades on surfaces other than
grass;
– use of the machine for leaf or debris col-
lection.
Improper use of the machine will invalidate
the warranty, relieve the Manufacturer
from all liabilities, and the user will conse-
quently be liable for all and any damage or
injury to himself or others.
3. AFTER-SALES SERVICE
This manual gives all the necessary in-
structions for using the machine and carry-
ing out basic maintenance.
Any adjustments or maintenance opera-
tions not described in this manual must be
carried out by your Dealer or a specialized
Service Centre. Both have the necessary
knowledge and equipment to ensure that
the work is done correctly without aecting
the safety of the machine.
If you wish, you can ask your dealer to pre-
pare a maintenance programme personal-
ised to your needs. This will help you keep
your new purchase in peak performance
and maintain its value over time.

3
EN
1.1 HOW TO READ THE MANUAL
Some paragraphs in the manual contain-
ing important information regarding safety
and operation are emphasized in the fol-
lowing ways:
NOTE or
IMPORTANT These give details or
further information on what has already
been said, in the aim to prevent damage
to the machine.
WARNING! Non-observance
will result in the risk of injury to
oneself or others.
DANGER! Non-observance
will result in the risk of serious
injury or death to oneself or others.
This manual describes various versions
of the machine, which mainly dier as
follows:
– the inclusion of components or
accessories which are not widely
available;
– special equipment tted.
The symbol “” highlights all the
dierences in usage and is followed by
the indication of the version to which it
refers.
The symbol “ ” refers to another part of
the manual where further information can
be found.
NOTE Positions on the machine, such
as “front”, “back”, “left” or “right” hand
side, refer to the direction of forward
travel.
IMPORTANT
For all operations
regarding the use
and maintenance
of the engine or the
battery
not described in this
manual, refer to the
relevant manuals
which form an
integral part of all
the documentation
supplied with the
machine.
1.2 GENERAL SAFETY REGULATIONS
WARNING! Read carefully
before using the machine.
A) TRAINING
1) Read the instructions carefully. Be
familiar with the controls and how to use
the equipment properly.
2) Never let children or people unfamiliar
with these instructions use the machine.
Local regulations can restrict the age of
the user.
3) Never mow while people, especially
children, or pets are nearby.
4) Keep in mind that the operator or user
is responsible for accidents or hazards
occurring to other people or their property.
1. SAFETY

4
EN
5) Do not carry passengers.
6) All drivers should seek and obtain
professional and practical instruction.
Such instruction should emphasise:
– the need for care and concentration
when working with ride-on machines;
– you cannot use the brake to regain
control of a ride-on machine sliding
down a slope. The main reasons for
loss of control are:
– insucient wheel grip;
– overspeeding;
– inadequate braking;
– the type of machine is unsuitable for its
task;
– unawareness of the eect of ground
conditions, especially slopes;
– incorrect hitching and load distribution.
B) PREPARATION
1) While mowing, always wear sturdy
footwear and long trousers. Do not
operate the equipment barefoot or
wearing open sandals.
2) Thoroughly inspect the area where
the equipment is to be used and remove
all objects which can be ejected from the
machine.
3) DANGER! Petrol is highly ammable:
– store fuel in containers specically
designed for this purpose;
– refuel outdoors only and do not smoke
while refuelling;
– add fuel before starting the engine.
Never remove the cap of the fuel tank
or add petrol while the engine is running
or when the engine is hot;
– if you spill petrol, do not start the
engine and move the machine away
from the area of spillage. Do not create
any source of ignition until the petrol
vapours have evaporated;
– put back and tighten all fuel tank and
container caps securely.
4) Replace faulty silencers.
5) Before use, always inspect the
machine to check that the blades, blade
bolts and cutter assembly are not worn
or damaged. Replace worn or damaged
blades and bolts in sets to preserve
balance.
6) On multi-bladed machines, remember
that the rotation of one blade can cause
other blades to rotate.
C) OPERATION
1) Do not start the engine in a conned
space where dangerous carbon monoxide
fumes can collect.
2) Mow only in daylight or good articial
light.
3) Before starting the engine, disengage
the blades and shift into neutral.
4) Do not use on slopes of more than 10°
(17%).
5) Remember there is no such thing as
a “safe” slope. Travelling on grass slopes
requires particular care. To guard against
overturning:
– do not stop or start suddenly when
going up or downhill;
– engage the drive slowly and always
keep the machine in gear, especially
when travelling downhill;
– machine speeds should be kept low on
slopes and during tight turns;
– tay alert for humps and hollows and
other hidden hazards;
– never mow across the face of the slope.
6) Use care when pulling loads or using
heavy equipment:
– use only approved drawbar hitch points;
– limit loads to those you can safely
control;
– do not turn sharply. Use care when
reversing;
– use counterweight(s) or wheel weights
whenever advised in the instructions
manual.
7) Disengage the blades before crossing

5
EN
surfaces other than grass.
8) Never use the machine with damaged
guards, or without the safety protective
devices in place.
9) Do not change the engine governor
settings or overspeed the engine.
Operating the engine at excessive speed
can increase the risk of personal injury.
10) Before leaving the driving seat:
– disengage the blades and lower the
attachments;
– go into neutral and apply the parking
brake;
– stop the engine and remove the ignition
key.
11) Disengage the blades, stop the
engine and remove the ignition key:
– before clearing blockages or unclogging
the collector channel;
– before cleaning, checking or servicing
the machine;
– after striking a foreign object. Inspect
the machine for damage and make
repairs before restarting and operating
the machine;
– If the machine starts to vibrate
abnormally (check for the causes
immediately).
12) Disengage the blades for transport or
whenever they are not in use.
13) Stop the engine and disengage the
blades:
– before refuelling;
– before removing the grass-catcher.
14) Reduce the throttle during engine
run-out. If the engine is provided with a
shut-o valve, cut o the fuel when you
have nished mowing.
D) MAINTENANCE AND STORAGE
1) Keep all nuts, bolts and screws tight to
be sure the equipment is in safe working
condition.
2) Never store the equipment with petrol
in the tank inside a building where fumes
may reach an open ame or spark.
3) Allow the engine to cool before storing
in any enclosure.
4) To reduce re hazards, keep the
engine, silencer, battery compartment and
petrol storage area free of grass, leaves,
or excessive grease.
5) Check the grass-catcher frequently for
wear or deterioration.
6) Replace worn or damaged parts for
safety purposes.
7) If the fuel tank has to be drained, this
should be done outdoors.
8) On multi-bladed machines, remember
that the rotation of one blade can cause
other blades to rotate.
9) When the machine is to be stored or
left unattended, lower the cutting deck.

6
EN
1.3 SAFETY LABELS
Your machine must be used with care.
This is why labels with illustrations have
been placed on the machine, to remind
you of the main precautions to take during
use.
These labels are to be considered an
integral part of the machine. Should a
label come o or become illegible, contact
your dealer to replace it. Their meaning is
explained below.
1Warning: Read the instructions
before operating this machine.
2Warning: Disconnect the ignition key
and read the instructions before carrying
out any repair or maintenance work.
3Danger! Ejected objects: Do not
operate without either the rear discharge
guard or the grass-catcher being in place.
4Danger! Ejected objects: Keep
bystanders away.
5Danger! Machine rollover: Do not
use this machine on slopes steeper then
10°.
6Danger! Dismemberment: Make
sure that children stay clear of the
machine at all time when engine is
running.
7Danger of cutting yourself. Blades
in movement. Do not put hands or feet
near or under the opening of the cutting
plate.
8Warning! Keep away from hot
surfaces.
1.4 REGULATIONS FOR TOWING
A kit for towing a small trailer is available
on request.
This accessory is to be tted following the
instructions provided.
When using the towing kit, do not
exceed the recommended loads stated
on the label
and follow
the safety
instructions.
1
4
7
2
5
8
3
6

7
EN
2.1 IDENTIFICATION
OF THE MACHINE
The label located near the battery housing
has the essential data of each machine.
2.2 IDENTIFICATION OF MAIN
COMPONENTS
The main components of the machine
have the following functions:
11. Cutting deck: this is the guard
housing the rotating blades.
12. Blades: these are what cut the grass.
The wings at the ends help convey
the cut grass towards the collector
channel.
13. Collector channel: this is the part
connecting the cutting deck to the
grass-catcher.
14. Grass-catcher: as well as collecting
the grass cuttings, this is also a safety
element that stops any objects drawn
up by the blades from being thrown
outside of the machine.
15. Rear discharge guard (available
upon request): this can be tted
in place of the grass-catcher and
prevents objects from being drawn up
by the blades and thrown far from the
machine.
16. Engine: this moves the blades and
drives the wheels. Its specications
and regulations for use are described
in a specic manual.
1. Acoustic power level according to
directive 2000/14/CE
2. Conformity mark according to
directive 2006/42/CE
3. Year of manufacture
4. Operating engine power and speed
5. Type of machine
6. Serial number
7. Weight in kg
8. Name and address of manufacturer
9. Type of transmission (if indicated)
10. Article Code
The example of the declaration of conformity
can be found on the penultimate page of the
manual.
Write your machine’s serial
number here (6)

    

2. IDENTIFICATION OF THE MACHINE AND COMPONENTS






 

8
EN
17. Battery: provides the energy for
starting the engine. Its specications
and regulations for use are described
in a specic manual.
18. Driving seat: this is where the
machine operator sits. It has a
sensor connected to safety devices
for detecting the presence of the
operator.
19. Regulation and safety labels: give
reminders on the main regaulations
for working safely, each of which is
explained in chapter 1.
20. Inspection hatch: for access to the
battery; it is xed by a screw and
should always be closed while the
machine is in use.


 