Ghent nexus NEX203ME-FR User manual

EASEL AND IDEAWALL ASSEMBLY INSTRUCTIONS
Models
NEX203ME-FR, NEX206MW-FR
IS-NEX20XMX 2/18
All manuals and user guides at all-guides.com

#10 X 1 1/2" PAN HEAD
TAPPING SCREW
4 EA.
#10 X 2 1/2" PAN HEAD
MACHINE SCREW
5 EA.
#12 X 1" PAN HEAD
MACHINE SCREW
8 EA.
(HOOK)
www.nexusbyghent.com - Lebanon, OH - 800-543-0550
1
RECOMMENDED TOOLS:
CORDLESS DRILL - 12 VOLT OR BETTER
#2 AND #3 PHILLIPS SCREWDRIVER BITS
SCREWDRIVER BIT EXTENDER

Before discarding the packaging, inventory the components
and fasteners. (Some may be taped to the foam packaging.)
FASTENERS AND HARDWARE
MARKER/ERASER
HOLDER
1 EA.
TABLET HANGER
(WITH HOOKS)
2 EA.
TABLET HANGER
2 EA.
All manuals and user guides at all-guides.com

CROSS RAIL
1 EA.
FOOT ASSEMBLY
2 EA.
ACCENT PANEL
1 EA.
ACCENT PANEL RAIL
2 EA.
TABLET HANGER
2 EA.
MARKERBOARD
1 EA.
SIDE POST
2 EA.
TABLET HANGER
(WITH HOOKS)
2 EA.
EASEL AND IDEAWALL
COMPONENTS
2
www.nexusbyghent.com - Lebanon, OH - 800-543-0550
All manuals and user guides at all-guides.com


REFERENCE:
SCREW HOLE
#10 X 1 1/2" PAN HEAD
TAPPING SCREW
(4 PLACES)
USE #2 DRIVER BIT
TABLET HANGER
BRACKET
(WITH HOOKS)
#10 X 2 1/2" PAN
HEAD
MACHINE SCREW
(4 PLACES)
USE #2 DRIVER BIT
2x
TABLET HANGER
BRACKET
2x
www.nexusbyghent.com - Lebanon, OH - 800-543-0550
3
2.
Loosely attach the markerboard and
the accent panel, with rails, to the
side posts as shown.
1.
Insert the accent
panel into the accent
panel rails.
All manuals and user guides at all-guides.com


INSTALL WITH
CHANNEL SIDE FACING
DOWN
#12 X 1" PAN HEAD
MACHINE SCREW
(4 PLACES)
USE #3 DRIVER BIT
WITH A BIT ENTENSION
#12 X 1" PAN HEAD
MACHINE SCREW
(4 PLACES)
USE #3 DRIVER BIT
www.nexusbyghent.com - Lebanon, OH - 800-543-0550
4.
Attach the feet assembly to
the side posts, as shown.

ASSEMBLE THE FEET ASSEMBLY ON A
FLAT SURFACE, SO THAT THE CASTERS STAY LEVEL.
3.
Attach the foot
assemblies to the cross
rail, as shown.
4
5.
Tighten all screws to complete the assembly.
All manuals and user guides at all-guides.com