Giant Alarm System CS-422B User manual

USB (Micro B) & Light Bar
Speaker
Headset Jack
Big Motor
Small Motor
CS-422B Bluetooth Gamepad Manual
1、INTRODUCTION：
This gamepad is P4 BT Wireless Controller 3rd Edition, suitable for PS4 console,
compatible with PS4 Bluetooth wireless specification. Corresponding to 4 analog
axes, 2 analog buttons and 16 digital keys, 2-Points Touch Pad, RGB Light Bar, Big
and Small Vibration, 6-axis Motion Sensor, Mono Speaker, Headset Jack, and
supports PC under wired connection, Wireless pairing function.
2、PRODUCT DESCRIPTION：
2.1 Support Bluetooth wireless connection（Bluetooth 4.2+EDR Specification)。
2.2 Support USB wired pairing（USB 1.1 or USB 2.0,Micro B)
2.3 Button&Stick (Digital button*16, analog button*2, analog axis 4, analog resolution is 256
steps）
Button
Digital/Analog
Button
Digital/Analog
PS
D
Up
D
OPTION
D
Down
D
SHARE
D
L1
D
L3
D
L2
D/A(0 to 255)
R3
D
R1
D
Circle
D
R2
D/A(0 to 255)
Cross
D
Touch Key
D

(0 , 0)
Touch Pad Coordinate System
x
y
Touch Area
Triangle
D
Left Stick (x-axis)
A(0 to 255，center:128)
Square
D
Left Stick (y-axis)
A(0 to 255，center:128)
Right
D
Right Stick (x-axis)
A(0 to 255，center:128)
Left
D
Right Stick (y-axis)
A(0 to 255，center:128)
2.4 Touch Pad (Capacitive touchpad capable of supporting 2 input points at the same
time）
2.5 Light Bar (Status light bar, composed of 3 colors RGB LED, each color brightness is divided
into 256 levels）
LED
Value Range
Red
0:off，1 to 255 : On
Green
Blue
In the main screen of PS4 console, the color status of each gamepad：
Gamepad 1：Blue(64)、Gamepad 2：Red(64)、Gamepad 3：Green(64)、Gamepad 4：
Purple(Red=64、Blue=64)。
2.6 Vibration
Built-in 2 vibration motors, the left side of the gamepad is a large motor, and the right side is
a small motor. Each vibration level can be divided into 256 steps
Motor
Value Range
Small (Right Side)
0:stop，1 to 255 : rotate
Large (Left Side)
2.7 Motion Sensor
Motion sensors, respectively for acceleration and angular velocity sensing, each with 3
direction axes, each direction axis resolution 65536 steps
SPEC.
Value Range
Number of Detectable Touch Points
2
Pressure-sensitive Format
Capacitance
X-axis Touch Coordinate Range
0 to1919
Y-axis Touch Coordinate Range
0 to 941
Sensor
Value Range
Acceleration
± 4 G
X-axis
-32768↔0000↔32767
0G : 0 、±1G : ±8192
Y-axis
Z-axis
Angular Velocity
(Gyro)
± 2000 dps
X-axis
-32768↔0000↔32767
(When still : 0)
Y-axis
Z-axis

Angular Velocity :
Z : +(Plus)
Angular Velocity :
Z : -(Minus)
Angular Velocity :
X : +(Plus)
Angular Velocity :
Y : -(Minus)
Angular Velocity :
X : -(Minus)
2.8 Audio Feature
Built-in mono speaker, stereo headset jack
2.9 Power
Battery capacity：3.7V/600MAh Lithium battery
Audio
Spec.
Speaker
Built-in，Mono 。
Headset Jack
Support Stereo Headset、Microphone 。
Type
Voltage (± 0.1 V)
Lithium-ion rechargeable battery
DC 3.6V to DC4.2V
Full power
DC3.9 to DC 4.2V
2 bars of power
DC3.7 to DC 3.9V
1 bars of power
DC3.6 to DC 3.7V
No power
Under DC3.6V
Hibernation
Under DC3.55V

3、CONNECTION DESCRIPTION：
1、Wired pairing method: Use the Micro-USB cable to connect to PS4 console to complete the
pairing. After the pairing is completed, press the PS button to connect wirelessly.
2. Wireless pairing mode: In the dormant state of gamepad, press SHARE button, and then press
PS button for about 2 seconds, and observe that the LED light bar starts to flash twice at an
interval of white light to enter the pairing mode. Then the device of PS4 gamepad performs
Bluetooth search and pairing.
4、PRODUCT TECHNICAL SPECIFICATIONS：
1、Operating voltage：DC3.6-4.2V
2、Operating current：55MA
3、Motor current：80-100MA
4、Sleep current：0
5、Battery capacity：600MAH
6、Charging voltage：Below 300MA
7、Charging time：About 3 hours
8、Use time: about 8 H; when the motor is vibrating, about 4 H.

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.