G4200 Coax Serial Product Quick Start Guide
The following table shows the port descriptions.
Console port: A RS-232 connector for connection
to a computer for console control/administration.
The RS-232 console port can be used for
accessing the device CLI (command line
interface) for out-of-band management.
Monitor port, 1 x 1GE local system
provision/monitoring port
2x GE/10GE SFP Ethernet ports for uplink
aggregation
G.hn ports for data signal
Power is supplied via coaxial cables (40-95VAC)
The following table shows the LED descriptions.
The power is on and supplying the
current to the system
The power is off or it is not
supplying the current to the system
The corresponding port connection
normal
The link condition is poor or there is
no connection to this port
The corresponding port connection
abnormal and link quality is poor
The link condition is normal or there
is no connection to this port
The corresponding port connection
normal
there is no connection to this port
The corresponding port is selected.
