Gigabyte M34WQ User manual

M34WQ

LCD Monitor User's Manual
- 2 -
Copyright
© 2021 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their
respective owners.
Disclaimer
Information in this manual is protected by copyright laws and is the
property of
GIGABYTE.
Changes to the specications and features in this manual may be made
by
GIGABYTE without prior notice.
No part of this manual may be reproduced, copied, translated,
transmitted, or published in any form or by any means without
GIGABYTE’s prior written permission.
• In order to assist in the use of this monitor, carefully read theUser
Guide.
• For more information, check on our website at:
https://www.gigabyte.com
The terms HDMI and HDMI High-Denition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing Administrator, Inc. in the United States
and other countries.

LCD Monitor User's Manual
- 3 -
Safety Precautions
Read through the following Safety Precautions before using the monitor.
• Only use the accessories that are provided with the monitor or that
which are recommended by themanufacturer.
• Keep the plastic packaging bag for the product in a place that
cannot be reached by children.
• Before connecting the monitor to the power outlet, make sure that
the voltage rating of the power cable is compatible with thepower
specication in the country where you arelocated.
• The power cord plug must be connected to a properly wiredand
grounded power outlet.
• Do not touch the plug with wet hands, otherwise easily cause
electric shock.
• Place the monitor in a stable and well-ventilatedplace.
• Do not place the monitor near any heat sources such as electric
radiators or direct sunlight.
• The holes or openings on the monitor are for ventilation. Do not
cover or block the ventilation holes with any objects.
• Do not use the monitor near water, drinks, or all types of liquids.
Failure to do so may result in electric shock or damage to the
monitor.
• Make sure to unplug the monitor from the power outletbefore
cleaning.
• As the screen surface is easy to be scratched, avoid touchingthe
surface with any hard or sharp object.
• Use a soft lint-free cloth instead of a tissue to wipe the screen.You
may use a glass cleaner to clean the monitor if required. However,
never spray the cleaner directly onto the screen.
• Disconnect the power cable if the monitor is not being used for a
long period of time.
• Do not attempt to disassemble or repair the monitoryourself.

LCD Monitor User's Manual
- 4 -
Stability Hazard Precautions
The product may fall, causing serious personal injury or death. To prevent
injury, this product must be securely attached to the oor/wall in accor-
dance with the installation instructions.
Many injuries, particularly to children, can be avoided by taking simple
precautions such as:
• ALWAYS use stands or installation methods recommended by the
manufacturer of the product set.
• ALWAYS use furniture that can safely support the product.
• ALWAYS ensure the product is not overhanging the edge of the
supporting furniture.
• ALWAYS educate children about the dangers of climbing on
furniture to reach the product or its controls.
• ALWAYS route cords and cables connected to your product so
they cannot be tripped over, pulled or grabbed.
• NEVER place a product in an unstable location.
• NEVER place the product on tall furniture (for example,
cupboards or bookcases) without
• anchoring both the furniture and the product to a suitable
support.
• NEVER place the product on cloth or other materials that may be
located between the product and supporting furniture.
• NEVER place items that might tempt children to climb, such as
toys and remote controls, on the top of the product or furniture
on which the product is placed.
• If the existing product is going to be retained and relocated, the
same considerations as above should be applied.
• To prevent personal injury or damage to the product caused
by tipping over due to earthquakes or other shocks, make sure
to install the product in a stable location and take measures to
prevent falling.

LCD Monitor User's Manual
- 5 -
Contents
INTRODUCTION........................................................................... 7
Unpacking...................................................................................................7
Package Contents ....................................................................................9
Product Overview ....................................................................................10
GETTING STARTED ...................................................................... 12
Installing the Stand Base .......................................................................12
Lift the monitor.........................................................................................13
Adjusting the Viewing Angle ...............................................................14
Making Connections...............................................................................18
USING THE DEVICE...................................................................... 19
Turning the Power On/O.....................................................................19
User Comfort Recommendations.......................................................20
Selecting the Input Source ...................................................................21
OPERATIONS................................................................................ 22
Quick Menu ................................................................................. 22
Function Key Guide .................................................................................24
Congure the Device Settings.............................................................29
APPENDICES................................................................................ 42
Specications.............................................................................................42
Supported Timing List............................................................................43
Troubleshooting.......................................................................................44
Basic Care ....................................................................................................45
Notes on USB Charging..........................................................................45

LCD Monitor User's Manual
- 6 -
GIGABYTE Service Information............................................................45
SAFETY INFORMATION ............................................................... 46
Regulatory Notices ..................................................................................46

LCD Monitor User's Manual
- 7 -
INTRODUCTION
Unpacking
1. Open the upper cover of the packaging box. Then observethe
unpacking instruction attached on the inner cover. Making
sure the box is in the correct orientation, carefully lay the box
on the stable surfacepen.
2. Open the inner cover. Grab the EPS foam assembly (through the
openings) to pull it out of the box.

LCD Monitor User's Manual
- 8 -
3. Remove the items from the upper EPS foam.
4. Remove the upper EPS foam.Then you can remove the stand from
the lower EPS foam.

LCD Monitor User's Manual
- 9 -
Package Contents
The following items come with your packaging box. If any of them is
missing, please contact your local dealer.
Monitor Monitor Base Power Cable
HDMI Cable
USB CableStand DP Cable
Multilingual
Installation
Guide
Warranty Card
Quick Start Guide Warranty Card
Note: Please keep the packaging box and packing materials for fu-
ture transportation and/or installation of the monitor. 4 screws (MAC.
Screw-MI M4.0 x 14.0L) are provided for wall mount installation (refer
to page 16).

LCD Monitor User's Manual
- 10 -
Product Overview
Front View
1
1Control button

LCD Monitor User's Manual
- 11 -
Rear View
8
64321 7 5
AC
1AC IN jack
2HDMI ports (x2)
3DisplayPort
4Type-C port
5USB upstream port
6USB 3.0 ports
7USB 3.0 ports
8Headphone jack

LCD Monitor User's Manual
- 12 -
GETTING STARTED
Installing the Stand Base
1. Align the Stand base with the stand o underneath the stand.Then
attach the base onto the stand. Tighten the screw to secure the
monitor base inplace.
1
3
2or or
Note: You can either use a coin or a small athead screwdriver to tighten the
screw.

LCD Monitor User's Manual
- 13 -
Lift the monitor
Take the monitor out of the box by holding the stand arm. Carefully
lift the monitor, turn it over and place it upright on its stand on a
at even surface.Remove the foam wrap from the monitor.
Note: Consider keeping the box and packaging in storage for use in the future
when you may need to transport the monitor. The tted foam packing is ideal
for protecting the monitor during transport.

LCD Monitor User's Manual
- 14 -
Adjusting the Viewing Angle
Note: Hold the monitor base so that the screen does not topple when you
make the adjustment.
Adjusting the Tilt Angle
Tilt the screen forward or backward to the desired viewing angle
(-5˚ to 21˚).
21

LCD Monitor User's Manual
- 15 -
Changing the Screen Orientation
Raise the screen to the highest position (130mm).
Note: Before making the height adjustment, make sure you have removed
the safety plate from the stand.

LCD Monitor User's Manual
- 16 -
Installing a Wall-Mount Bracket (Optional)
Use only a 100 x 100 mm VESA compatible wall mount kit.
1. Place the monitor on a at surface, with the screen facing down.
Note: We recommend that you cover the table surface with soft cloth to pre-
vent damage to the monitor.
2. Push the locking clips inward to detach the stand from themonitor.
3. Remove the stand.

LCD Monitor User's Manual
- 17 -
4. Attach the mounting bracket to the mounting holes at the rear of
the monitor. Then use the screws provided with this monitor to
secure the bracket in place.
100 mm
100 mm
Note: To mount the monitor on the wall, refer to the installation guide that is
included in the wall-mount bracket kit. VESA Mounting Screw M4 x 8mm mini-
mum.

LCD Monitor User's Manual
- 18 -
Making Connections
24
35
6
8
7
1
1
AC
1Power cable
2HDMI cable
3DisplayPort cable
4Type-C cable
5USB (A-Male to B-Male) cable
6USB cable
7USB cable
8Headphone cable

LCD Monitor User's Manual
- 19 -
USING THE DEVICE
Turning the Power On/O
Make sure the power switch next to the AC power input jack is switched
to ON.
Power On
1. Connect one end of the power cable to the AC IN jack at the rear of
the monitor.
2. Connect other end of the the power cable to a power outlet.
3. Press the Control button to turn on the monitor.The Power LED will
light in white, indicating the monitor is ready touse.
Power O
Press the Control button for 2 seconds to turn o the monitor.
Note: When the Main menu appears on the screen, you can also turn o the
monitor by moving the Control button down ( ). Refer to page 24 .

LCD Monitor User's Manual
- 20 -
User Comfort Recommendations
The following are some tips for comfortable viewing of your monitor:
• Optimal viewing distances for monitors range fromapproximately
510 mm to 760 mm (20”to30”).
• A general guideline is to position the monitor such that the top
of the screen is at or slightly below your eye-height when you are
comfortably seated.
• Use adequate lighting for the type of work you areperforming.
• Take regular and frequent breaks (at least for 10 minutes) every half-
hour.
• Be sure to periodically look away from your monitor screen and focus
on a far object for at least 20 seconds during the breaks.
• Eye exercise can help reduce eye strain. Repeat these exercises
frequently: (1) look up and down (2) slowly roll your eye (3)move
your eyes diagonally.