Gigabyte G190-H44 Owner's manual

Model Name:
G190-H44
GBT P/N:
6NG190H44MR-00
Release Date:
2016/02/03
NOTICE: This document has released under
A Non-Disclosure Agreement to:
CUSTOMER:
CHANNEL
PROJECT:
G190-H44
This Document has been released from:
Company:
GIGABYTE TECHNOLOGY CO., LTD
Approved By:
trevor.tsai 蔡東霖
Checked By:
trevor.tsai 蔡東霖
Released By:
mars.su 蘇子鈞
Ref.No/ Rev:
1.0
Assembly Notice

Work Instruction
system integration
engineering department
Issued Date: 2016/02/03
Revised Date:
Document Ref. Number:
Revision: 1.0
Pages:
2/11
`
1Overview................................................................................................... 3
1.1 Document History...................................................................................................3
1.2 Purpose....................................................................................................................3
2Procedure for L6system assembly......................................................... 4
2.1 Step1........................................................................................................................4
2.2 Step 2.......................................................................................................................6
2.3 Step3........................................................................................................................7
2.4 Step 30.....................................................................................................................8
2.5 Step5........................................................................................................................9
2.6 Step 6.....................................................................................................................10

Work Instruction
system integration
engineering department
Issued Date: 2016/02/03
Revised Date:
Document Ref. Number:
Revision: 1.0
Pages:
3/11
`
1 Overview
1.1 Document History
Item
Revision
Description
Date
Originator
1
1.0
Install 145W Fan fuct
2016/02/03
Mars.su
1.2 Purpose
This document defines the particular Gigabyte requirements for standard server
assembly at DVT stage. The purpose is to ensure the method of assembly be transfer to the
factory.

Work Instruction
system integration
engineering department
Issued Date: 2016/02/03
Revised Date:
Document Ref. Number:
Revision: 1.0
Pages:
4/11
`
2 Procedure for L6system assembly
Step
Method
Part number /
Board model name
Q’ty
Comment
1
拆開上蓋，一共 14 顆螺絲
2.1 Step1

Work Instruction
system integration
engineering department
Issued Date: 2016/02/03
Revised Date:
Document Ref. Number:
Revision: 1.0
Pages:
5/11
`
Step
Method
Part number /
Board model name
Q’ty
Comment
2
移除中間的 Fan duct
screw 移除後將 Fan duct 取下,
再將螺絲鎖回

Work Instruction
system integration
engineering department
Issued Date: 2016/02/03
Revised Date:
Document Ref. Number:
Revision: 1.0
Pages:
6/11
`
Step
Method
Part number /
Board model name
Q’ty
Comment
2
移除兩邊束線帶
2.2 Step 2

Work Instruction
system integration
engineering department
Issued Date: 2016/02/03
Revised Date:
Document Ref. Number:
Revision: 1.0
Pages:
7/11
`
Step
Method
Part number /
Board model name
Q’ty
Comment
3
取Fan duct
2.3 Step3
Right Fan Duct
Left Fan Duct

Work Instruction
system integration
engineering department
Issued Date: 2016/02/03
Revised Date:
Document Ref. Number:
Revision: 1.0
Pages:
8/11
`
Step
Method
Part number /
Board model name
Q’ty
Comment
4
放入左邊 Fan duct
2.4 Step 30

Work Instruction
system integration
engineering department
Issued Date: 2016/02/03
Revised Date:
Document Ref. Number:
Revision: 1.0
Pages:
9/11
`
Step
Method
Part number /
Board model name
Q’ty
Comment
5
放入右邊 fan duct
2.5 Step5

Work Instruction
system integration
engineering department
Issued Date: 2016/02/03
Revised Date:
Document Ref. Number:
Revision: 1.0
Pages:
10/11
`
Step
Method
Part number /
Board model name
Q’ty
Comment
6
放入中間的 Fan duct
2.6 Step 6