Gigaset SL750H Setup guide

Customer Training Guides
Gigaset SL750H

Gigaset SL750H
Customer Training Guide
Overview

Table of Contents
Making a call 4
External Call 4
Internal Call 4
Answering a call 4
Transferring a call 4
Internal Transfer 4
External Transfer 4
Placing a call on hold 4
Muting a call 5
Adjusting volume 5
Redial 5
Redial Last Number 5
Redial Previous Numbers 5
Conference call 5
MyCalls Call Manager Training 5

User Training Guide
Making a call
External Call
1. Press 9 followed by the number you would like to call.
2. Press the Talk button ( )
Internal Call
If you know the extension number
1. Enter the extension using the number pad
2. Press the Talk button
From the directory
1. Press the Directory key on the control key
2. Scroll to the required contact using the navigation keys
3. Press either the Talk button
Answering a call
1. When the phone rings press the Talk key ( )
Transferring a call
Internal Transfer
1. After answering the call, press the Ext Call soft key, this will put the caller on hold
2. Enter the extension you wish to transfer to
3. When the call is answered inform the 2nd party of the call and then press the Recall key to
transfer the call
External Transfer
1. After answering the call, press the Ext Call soft key, this will put the caller on hold
2. Press 9, then the number you wish to send the call to
3. When the call is answered inform the 2nd party of the call and then press the Recall key to
transfer the call
Placing a call on hold
1. After answering the call, press the Ext Call soft key
2. To return to the call, press the End soft key

Muting a call
1. Press the Mute key ( ) on the control button
2. To unmute press the same key again
Adjusting volume
1. Press the volume key ( ) on the control button
2. Use the left and right arrow keys ( ) to set the volume
3. Press the Save soft key
The volume setting will be automatically saved after 3 seconds, even if Save is not pressed
Redial
Redial Last Number
1. Press the Talk key ( ) twice
Redial Previous Numbers
1. Press the Talk key ( )
2. Use the navigation keys to select the number from the list
3. Press the Talk key ( ) to dial the selected number
Conference call
1. Press the Ext Call soft key, this puts the caller on hold
2. Dial the number of the party you wish to add
3. Press the Conf soft key to start the conference
MyCalls Call Manager Training
After completing the install, your engineer will help you book your free MyCalls Call Manager Training to take
you through the MyCalls Dashboard. You can scan the QR code or go to the website below at any time to book
additional training as required.
https://calendly.com/yotelecom-training

Date
Version
Notes
08/12/2021
1.2
Added QR Code Link to Training
09/11/2021
1.1
Added Page Footers & Title Image
24/09/2021
1.0
Release version