Gilian GilAir Plus User manual

Tri-Pod Mounting Instructions
1000 112
TH
Circle N, Suite 100 • St. Petersburg, FL 33716 USA
[phone] • [phone]
www.Sensidyne.com • [e-mail]
REF 360-0198-01rA

© 2015 Sensidyne, LP Sensidyne Document No. 360-0198-01rA
Page II Gilian GilAir®Plus Air Sampling Pump – Tri-Pod Mounting Instructions
Equipment Required:
Tri-Pod Mount
Any Tri-Pod with Standard Mounting
Plate
6” – 8” Standard Cable Tie
GilAir Plus Air Sampling Pump

Sensidyne Document No. 360-0198-01rA © 2015 Sensidyne, LP
Page III
Gilian GilAir® Plus Air Sampling Pump – Tri-Pod Mounting Instructions
Instructions
1Attach Tri-Pod Bracket to Tri-Pod
Mounting Plate Screw as shown.
2
Attach GilAir Plus Air Sampling Pump by
sliding Belt Clip over Tri-Pod Bracket until
Pump seats on bottom of Bracket as
shown.
3
Secure GilAir Plus Air Sampling Pump to
Tri-Pod Bracket by feeding a 6” to 8”
Cable Tie through each side of the
Bracket passing through the Belt Clip.
4 The GilAir Plus Air Sampling Pump is
now secured to the Tri-Pod and ready for
sampling.

Manufactured by:
Sensidyne, LP
1000 112
th
Circle N, Suite 100
St. Petersburg, Florida 33716
U.S.A.
800-451-9444 • [phone] • [fax] [phone]
www.Sensidyne.com • [email protected]
Authorized EU Representative
Schauenburg Electronic Technologies GmbH
Weseler Str. 35 · 45478
Mülheim-Ruhr Germany
[phone] • [phone] [fax]
www.schauenburg.com • [e-mail]
1000 112
th
Circle N, Suite 100 • St. Petersburg, FL 33716 USA
[phone] • [phone]
www.Sensidyne.com • [e-mail]