Gira 2361 00 User manual

Operating instructions
32576112 / 10869860 / 10.08.2022
LED orientation light 230 V~, white
Order no. 2361 00
LED orientation light 230 V~, warm white
Order no. 2364 00

LED orientation light 230 V~, white, LED orientation light 230 V~, warm white
Table of Contents
1 Safety instructions.............................................................................................................3
2 Device components...........................................................................................................3
3 Intended use .....................................................................................................................3
4 Product characteristics......................................................................................................4
5 Operation ..........................................................................................................................4
6 Information for electrically skilled persons ........................................................................4
7 Technical data...................................................................................................................6
8 Warranty............................................................................................................................6
2 / 6
32576112 10869860 10.08.2022

1 Safety instructions
Electrical devices may only be mounted and connected by electrically skilled
persons.
Serious injuries, fire or property damage possible. Please read and follow manual
fully.
Danger of electric shock. Always disconnect device before working on it. At the same
time, take into account all circuit breakers that supply dangerous voltage to the
device.
Fire hazard. Do not operate the LED luminaires on a dimmer. The LED luminaires
cannot be dimmed.
Do not connect LED luminaires to an electronic switch insert. Damage to LED lumin-
aires and switch insert may result.
The device is not suitable for use in safety-related applications or as an emergency
light.
This manual is an integral part of the product, and must remain with the end cus-
tomer.
2 Device components
(1) (2) (5)(4)(3)
Image1: Device components
(1) Flush-mounted insert, luminaire
(2) Cover frame, not included in the scope of delivery
(3) Labelling film, optional
(4) Light-scattering film
(5) Lamp cover
3 Intended use
– Luminaire for orientation or signalling
– Switchable using external switch
– Mounting in appliance box with dimensions according to DIN 49073
3 / 6
32576112 10869860 10.08.2022
LED orientation light 230 V~, white, LED orientation light 230 V~, warm white

4 Product characteristics
– Can be used in switch combinations or individually
– Makes it easier to find switches or to orient oneself in dark rooms
– Individually labelled film can be inserted
– Brightness can be changed using internal potentiometer
LED production tolerances may result in visible differences in brightness and
colour.
5 Operation
The luminaire is switched on or off with a switch or switching contact.
￭ Operate switch. Luminaire switches on or off.
6 Information for electrically skilled persons
DANGER!
Electric shock when live parts are touched.
Electric shocks can be fatal.
Before working on the device, disconnect all corresponding circuit breakers from the
supply voltage, secure against being switched on again and check that there is no
voltage!
Connect and mount the LED orientation light
Image2: Connection example
(1) Flush-mounted insert, luminaire
(6) Switch
4 / 6
32576112 10869860 10.08.2022
LED orientation light 230 V~, white, LED orientation light 230 V~, warm white

￭ Connect flush-mounted insert (1) as shown in the connection example
(see figure 2).
￭ Mount the flush-mounted insert (1) in the appliance box. The terminals must
be at the bottom.
￭ Complete the luminaire (see figure 1).
￭ Switch on mains voltage.
Changing the brightness of the LED orientation light
When delivered, the luminaire (1) is at maximum brightness.
Image3: Brightness adjuster
DANGER!
Mortal danger of electric shock.
The following work must be carried out under mains voltage and therefore may only
be carried out by an electrician!
Only use insulated tools for the work! Cover up live parts in the working environment.
￭ Switch off mains voltage.
￭ Remove lamp cover.
￭ Remove flush-mounted insert (1) from the appliance box. When doing this, en-
sure insulation of the cables in accordance with regulations.
￭ Switch on mains voltage.
￭ Switch on luminaire with switch (6).
￭ Adjust brightness by turning the adjuster (7) (see figure 3).
￭ Switch off mains voltage.
￭ Mount the flush-mounted insert (1) in the appliance box. The terminals must
be at the bottom.
￭ Fit lamp cover again.
5 / 6
32576112 10869860 10.08.2022
LED orientation light 230 V~, white, LED orientation light 230 V~, warm white

￭ Switch on mains voltage.
7 Technical data
Rated voltage AC 230 V ~
Mains frequency 50 Hz
Ambient temperature -15 ... +40 °C
Power consumption approx. 8.5 VA
Power factor 0.2
Brightness range 3 ... 100%
Number of LEDs 4
Colour temperature
Order no. 2361 00 approx. 5000 K
Order no. 2364 00 approx. 2700 K
Connection
Single stranded 1.5 mm²
8 Warranty
The warranty is provided in accordance with statutory requirements via the specialist
trade. Please submit or send faulty devices postage paid together with an error de-
scription to your responsible salesperson (specialist trade/installation company/elec-
trical specialist trade). They will forward the devices to the Gira Service Center.
Gira
Giersiepen GmbH & Co. KG
Elektro-Installations-
Systeme
Industriegebiet Mermbach
Dahlienstraße
42477 Radevormwald
Postfach 12 20
42461 Radevormwald
Deutschland
Tel [phone] - 602-0
Fax [phone] - 602-191
www.gira.de
[email protected]
6 / 6
32576112 10869860 10.08.2022
LED orientation light 230 V~, white, LED orientation light 230 V~, warm white