Gispen IC DUO WORKSTATION User manual

Gispen - www.gispen.com - All rights reserved - version 07/15
工具
根据尺寸，螺丝的数量可能会有变化
Tools
=
*Depending on the dimensions, there may be more / less screws
Nr. 5 M8x10
(34x)
M8x12
(4x)
M6x10 or
4.8x16
(80x)
Gispen IC DUO WORKSTATION
Gispen IC
Installation manual
HI-
安装指南
双人面对面
工作区安装指南

Gispen - www.gispen.com - All rights reserved - version 07/15
HI-双人面对面
安装框架
使用螺丝钉将桌面连接
将桌面连接把桌面安放于软表面上
Place the frame Place the table legs
Mount the tabletop connections using the screws
Place the tabletop connectionsPlace the tabletop on a soft surface
4 5
3
21
M6x10 or
4.8x16
(16x)
安装桌腿

Gispen - www.gispen.com - All rights reserved - version 07/15
HI-双人面对面
插入电缆槽进行连接
用螺丝钉固定电缆槽安装板安放好螺丝钉位置
使用螺丝钉将框架与桌面固定使用凹头螺丝钉将桌腿固定
Insert the cable tray connections10
8Fasten the cable tray mounting plates using the
screws
9Positions of the screws
Fasten the frame to the tabletop using the screws7
Fasten the table legs using the socket-head
screws
6
M6x10 or
4.8x16
(48x)
M6x10 or
4.8x16
(16x)
Nr. 5
M8x10
(32x)

Gispen - www.gispen.com - All rights reserved - version 07/15
HI-双人面对面
Nr. 5
M8x10
(2x)
13
将桌子旋转180°
12 Turn the table 180 degrees
调整桌子高度
11 Adjust the height of the table

Gispen - www.gispen.com - All rights reserved - version 07/15
HI-双人面对面
插入电缆槽进行连接
14 Insert the cable tray connections
将电缆槽安装在桌子上
15 Mount the cable tray onto the table
调整桌腿高度
16 Adjust the height of the table legs

Gispen International BV - www.gispen.com/manuals - All rights reserved - version 07/15
HI-双人面对面
用凹头螺丝固定主机架从框架上松开4个凹头螺丝
Fasten the CPU holder using the socket-head
screws
1817 Loosen 4 socket-head screws from the frame
Nr. 5
Nr. 5
M8x12
(4x)

Gispen International BV - www.gispen.com/manuals - All rights reserved - version 07/15
HI-双人面对面
将一台电脑安装在主机架上
19 Mount a computer onto the CPU holder