Gispen IC HI Series User manual

Gispen - www.gispen.com - All rights reserved - version 07/15
工具
根据尺寸，螺丝的数量可能会有变化
Tools
=
Nr. 5 M8x10
(16x)
M8x12
(4x)
M6x10 or
4.8x16
(32x)
*Depending on the dimensions, there may be more / less screws
Gispen IC SINGLE WORKSTATION
Gispen IC
Installation manual
HI-
安装指南
单独
单独工作区

Gispen - www.gispen.com - All rights reserved - version 07/15
HI-单独
调整桌子高度
安放桌脚 用凹头螺丝固定桌脚
把框架安放于软表面上
Adjust the height of the table
Fasten the table legs using the socket-head
screws
Place the table legs
Place the frame on a soft surface
5
43
21
Nr. 5
M8x10
(16x)
MAX. 3 X
最多3次

Gispen - www.gispen.com - All rights reserved - version 07/15
HI-单独
插入电缆槽连接件
用螺丝固定电缆槽安装板螺丝的位置
用螺丝将框架固定在桌面上桌面板装在框架下方。
Insert the cable tray connections10
8Fasten the cable tray mounting plates using the
screws
9Positions of the screws
Fasten the frame to the tabletop using the screws7Place the tabletop underneath the frame6
M6x10 or
4.8x16
(24x)
M6x10 or
4.8x16
(8x)

Gispen - www.gispen.com - All rights reserved - version 07/15
HI-单独
将桌子旋转180°
把电缆槽安装到桌子上
插入电缆槽连接件
13
12
Turn the table 180 degrees
Mount the cable tray onto the table
11 Insert the cable tray connections
Adjust the height of the table legs14
调整桌脚高度

Gispen - www.gispen.com - All rights reserved - version 07/15
HI-单独
用凹头螺丝固定主机架从框架上松开4个凹头螺丝
Fasten the CPU holder using the socket-head
screws
1615 Loosen 4 socket-head screws from the frame
Nr. 5
Nr. 5
M8x12
(4x)

Gispen - www.gispen.com - All rights reserved - version 07/15
HI-单独
把电脑安装到主机架上
17 Mount a computer onto the CPU holder