Glacier bay VUR2318A1 User manual

,Monday - Friday
SKU# 1005403623 /
1005403616 /
1005403614
Model# VUR2318A1 /
VUR3118A1 /
VUR3118A0 /
FSUR2718B1 /
FSUR3619A1 /
FSUR3619A0
V1-TU-6

Undermount Installation
Care and Cleaning
Service Parts
Package Contents
Hardware Included 3
4
11
16
17

1-855-HD-GLACIER or visit www.HomeDepot.com/GLACIERBAY.
/under
These screws can be installed with power tools.
Hardware not shown to actual size.
Under mount clip

4
NOTE: The manual only displays the assembly for double bowl sink, but the assembly instruction is
NOTE: Please matching your purchased product for below pages
SKU# Model# Bowls Picture
Single
Single
Double
Single
Single
Double
VUR2318A1
VUR3118A1
VUR3118A0
1005403623
1005403616
1005403614
FSUR2718B1
FSUR3619A1
FSUR3619A0
including but not limited to below SKU & configuration.

Part Description Quantity
L
Faucet
Topmount/Undermount template
5

Part Description Quantity
Faucet
Topmount/Undermount template
1
1
1
6
L

Part Description Quantity
Faucet
2
2
2
2
2
2
2
2
2
Topmount/Undermount template
7
L

Part Description Quantity
L
Faucet
Topmount/Undermount template
8

Part Description Quantity
Faucet
Topmount/Undermount template
1
1
1
9
L

Part Description Quantity
Faucet
2
2
2
2
2
2
2
2
2
Topmount/Undermount template
10
L

Undermount Installation
HOMEDEPOT.COM/GLACIERBAY
When you choose undermount style installation, please do not pull out the installation rail shown in this illustration.
This will cause the sink to be damaged beyond repair.It is strongly recommended that you use a professional installer is you choose
the undermount installation.
WARNING
11
Check the template (A) and select the cutline you want: line A1 is bowl size; line A2 is 1/2 wider than bowl size. If you choose line A1 or A2,
tear off the template through the broken line. Place the template (A1 or A2) on the countertop. Ensure the template is centered on the
counter so that it is parallel to the counter edge and that the installation hole will not interfere with the structure of the cabinet. Tape the
template (A1 or A2) to the countertop to keep it in place and then trace the cutout line on the template (A1 or A2) with a pencil.

Installing the strainer assembly
step 3.
1
1
HOMEDEPOT.COM/GLACIERBAY
Undermount Installation (continued)
Place the mounting clips as shown in the attched template and mark the centers of the clip on the countertop.
Attaching the mounting clips
12

HOMEDEPOT.COM/GLACIERBAY
Undermount Installation (continued)
13
7
Shut off the water supply.
Insert the faucet assembly (L) through the hole in the sink.
8Securing the faucet assemblyInstalling the faucet assembly
L
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
21
Sink
Push
up
21
1 1
Push
up 21
2
3
3
Sink
21
Sink
Continue to push up
and turn clockwise
to tighten
From underneath the sink, secure the faucet assembly
to the sink with the FastmountTM system (21). Push
the FastmountTM system (21) up over the threads until
it stops against the bottom of the sink, then hand turn
(clockwise) to tighten.

11 Making the water supply connections
Thread the nut (1) on the supply line onto the outlet of the
water supply valve (2) and tighten with a wrench. Do not
overtighten.
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
other and damaging.
1
2
Flushing and checking for leaks
Pull the hose assembly out of the spout and remove
the spray head by unscrewing it from the hose in a
counterclockwise direction. Be sure to hold the end of
the hose down into the sink and turn the faucet to
the warm position where it mixes hot and cold water.
Flush the water lines for one minute. This flushes away
any debris that could cause damage to internal parts.
Check for leaks.
Re-tighten any connections if necessary, but do not
overtighten. Reinstall the spray head by hand tightening
it back onto the spray hose in a clockwise direction.
IMPORTANT: After installation is completed, turn on the
hot and cold water supplies. Check for leaks. Do not lose
the gasket (1) in the hose.
1
12
Attaching the quick connector
to the receiving block
9 10
9
18
Weight
here
Weight
here
20 20
19
19
Installing the weight
Install the weight clip (20) at the point of the hose marking
"weight here”.
Insert the weight (19) onto the clip (20) by sliding it down
onto the clip (20).
Push the quick connector (18) firmly upward and attach it
to the receiving block (9). Pull down moderately to ensure
the connection has been made.
HOMEDEPOT.COM/GLACIERBAY
Undermount Installation (continued)
14

13 Removing the quick connector
If it is necessary to remove the quick connector (1),
squeeze the tabs (2) on the quick connector and then
pull down to disconnect.
Pull
down
Squeeze
1
1
2
8Installing the soap dispenser
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
into the soap assembly (O).
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
9
Making the water supply connections
Thread the nut (1) on the supply line onto the outlet of the
water supply valve (2) and tighten with a wrench. Do not
overtighten.
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
other and damaging.
Q
Topmount Installation (continued)
14
HOMEDEPOT.COM/GLACIERBAY
Undermount Installation (continued)
15
Making the water supply connections
Thread the nut (1) on the supply line onto the outlet of the
water supply valve (2) and tighten with a wrench. Do not
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
Making the water supply connections
Thread the nut (1) on the supply line onto the outlet of the
water supply valve (2) and tighten with a wrench. Do not
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
Making the water supply connections
Thread the nut (1) on the supply line onto the outlet of the
water supply valve (2) and tighten with a wrench. Do not
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
Making the water supply connections
Thread the nut (1) on the supply line onto the outlet of the
water supply valve (2) and tighten with a wrench. Do not
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
Making the water supply connections
Thread the nut (1) on the supply line onto the outlet of the
water supply valve (2) and tighten with a wrench. Do not
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
Making the water supply connections
Thread the nut (1) on the supply line onto the outlet of the
water supply valve (2) and tighten with a wrench. Do not
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
Making the water supply connections
Thread the nut (1) on the supply line onto the outlet of the
water supply valve (2) and tighten with a wrench. Do not
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each

Making the water supply connections
Thread the nut (1) on the supply line onto the outlet of the
water supply valve (2) and tighten with a wrench. Do not
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
Making the water supply connections
Thread the nut (1) on the supply line onto the outlet of the
water supply valve (2) and tighten with a wrench. Do not
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
Making the water supply connections
Thread the nut (1) on the supply line onto the outlet of the
water supply valve (2) and tighten with a wrench. Do not
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
Making the water supply connections
Thread the nut (1) on the supply line onto the outlet of the
water supply valve (2) and tighten with a wrench. Do not
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
Making the water supply connections
Thread the nut (1) on the supply line onto the outlet of the
water supply valve (2) and tighten with a wrench. Do not
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
Making the water supply connections
Thread the nut (1) on the supply line onto the outlet of the
water supply valve (2) and tighten with a wrench. Do not
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
Making the water supply connections
Thread the nut (1) on the supply line onto the outlet of the
water supply valve (2) and tighten with a wrench. Do not
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
Making the water supply connections
Thread the nut (1) on the supply line onto the outlet of the
water supply valve (2) and tighten with a wrench. Do not
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
16

Part Description Part Number
1
2
3
4
5
6
Screener
bowls
Strainer Ring
Rubber washer
Paper washer
Locknut
Plastic joint
Connecting nut
ST-001
ST-002
ST-003
ST-004
ST-005
ST-006
ST-007
ST-008
7
8
Service Parts
1
2
3
4
5
6
7
8
17
*Specify Finish
Faucet ID tags can
be found on the
hot water inlet
21
15
16
17
18
19
20
911
12
13
14
10
Part Description Part Number
9RP38451*
10 Inverter RP70715
11 Cartridge & Screw RP20052
12 Bonnet nut RP70688
13 Cap RP80028*
14 Handle assembly RP13701*
Spray head and Hose 16 O-ring RP60002
Part Description Part Number
17 Quick connect
assembly RP70697
18 O-ring RP60089
19 Weight RP70689
20 Weight clip RP70609
21 FastMount™ RP56096
15 Block RP70421

, Monday-Friday

¿Tiene preguntas o problemas, o le faltan piezas? Antes de devolver a la tienda,
llame al servicio de atención al cliente de Glacier Bay
Lunes a viernes de 8:00 a.m. – 7:00 p.m., EST y los sábados de 9:00 a.m. – 6:00 p.m., EST.
1-855-HDGLACIER
HOMEDEPOT.COM/GLACIERBAY
GRACIAS
continuamente para crear productos de calidad diseñados para mejorar su hogar. Visítenos en línea para ver nuestra línea
completa de productos disponibles para sus necesidades de mejoramiento del hogar. ¡Gracias por elegir Glacier Bay!
GUÍA DE USO Y CUIDADO
Fregadero de cocina de acero inoxidable
V1-TU-6
SKU# 1005403623 /
1005403616 /
1005403614
Model# VUR2318A1 /
VUR3118A1 /
VUR3118A0 /
FSUR2718B1 /
FSUR3619A1 /
FSUR3619A0

HOMEDEPOT.COM/GLACIERBAY
Póngase en contacto con 1-855-HDGLACIER para obtener más asistencia.
2
GARANTÍA LIMITADA DE POR VIDA
Los productos de Glacier Bay se fabrican con estándares y mano de obra de calidad superior y están respaldados por nuestra garantía limitada
de por vida. Los productos de Glacier Bay están garantizados al comprador original de estar libre de defectos en materiales o mano de obra.
Reemplazaremos GRATIS cualquier producto o pieza que pruebe estar defectuoso. Simplemente, devuelva el producto/pieza a cualquiera de las
tiendas minoristas de The Home Depot o llame al 1-855-HDGLACIER (1-855-434-5224) para recibir el artículo de reemplazo. Se debe presentar
el comprobante de compra (recibo original de la compra) del comprador original para todas las reclamaciones de garantía de Glacier Bay.
Esta garantía excluye los daños incidentales/inconsecuentes y los fallos debidos al uso indebido, abuso o desgaste normal. Esta garantía excluye
todos los usos industriales, comerciales y de negocios, cuyos compradores por el presente tienen una garantía limitada de cinco años a partir
Algunos estados y provincias no permiten la exclusión o limitación de los daños incidentales o consecuenciales, por lo que es posible que las
que varían de un estado a otro y de provincia a provincia. Visite una tienda o llame al 1-855-HDGLACIER para obtener más detalles.
Garantía
Información de seguridad
Índice
Índice ......................................................................................... 2
Información de seguridad ........................................................... 2
Garantía...................................................................................... 2
Preinstalación............................................................................. 3
..................................................... 3
Herramientas requeridas............................................................. 3
Herraje incluido........................................................................... 3
Contenido del paquete................................................................ 4
11
Instalación por abajo...................................................................
16
Cuidado y limpieza
Repuestos
....................................................................
....................................................................
17
Lea atentamente esta guía antes de instalar o utilizar este producto.
Guarde esta guía en un lugar seguro para referencia futura.
AVISO: Se pueden requerir herramientas especializadas para instalar el
de madera.
AVISO: El número de presillas incluidas con su fregadero puede diferir
AVISO: Deje que la silicona actúe según las instrucciones del fabricante