Glacier bay F51AC074CP Assembly instructions

SKU#
192-981
193-014
Model#
F51AC074CP
F51AC074BNV
INSTALLATION AND CARE GUIDE
TWO-HANDLE LAVATORY FAUCET
Questions, problems, missing parts?
Before returning to the store, call Glacier Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday
9 a.m. - 6 p.m., EST, Saturday
1-855-HD-GLACIER (1-855-434-5224)
HOMEDEPOT.COM/GLACIERBAY
THD 09/2015 REV.01
THANK YOU
We appreciate the trust and condence you have placed in Glacier Bay through the purchase of this lavatory
faucet. We strive to continually create quality products designed to enhance your home. Visit us online to see
our full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!

SILICONE
2
PLANNING INSTALLATION
TOOLS AND HARDWARE REQUIRED
Important Information................................2
Warranty......................................................2
Pre-installation...........................................2
Planning Installation................................2
Tools and Hardware Required..................2
Package Contents....................................3
Installation.................................................4
Operation.................................................7
Care and Cleaning.....................................8
Troubleshooting.........................................8
Service Parts..............................................9
Table of Contents
Pre-installation
LIMITED LIFETIME WARRANTY
Important Information
Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our
limited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free of
defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that proves defec-
tive. Simply, return the product / part to any of The Home Depot retail locations or call 1-855-HD Glacier (1-855-
434-5224) to receive the replacement item. Proof of purchase (original sales receipt) from the original consumer
purchaser must be made available for all Glacier Bay warranty claims.
This warranty excludes incidental / inconsequential damages and failures due to misuse, abuse or normal wear and
tear. This warranty excludes all industrial, commercial & business usage, whose purchasers are hereby, extended
a ve year limited warranty from the date of purchase, with all other terms of this warranty applying except the
duration of warranty.
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitations may not apply to you. This warranty gives you specic legal rights and you may also have other
rights that vary from state to state and province to province. Please see a store or contact 1-855-HD Glacier for
more details.
Before you begin to install this product, ensure that all parts are present. Compare parts with the package
contents list. If any part is missing or damaged, do not attempt to install the product. Contact customer service
for replacement parts.
Adjustable
Wrench Channel-
Lock Pliers
Safety
Goggles Sealant
Observe all local plumbing and building codes.
Cover the sink drain to avoid losing any parts.
Review the care and cleaning section included in this guide.
Warranty
(2) Supply
Lines

B*
C
P
A
Faucet Assembly
Drain Assembly
H*
D*
E*
F*
M*
L*
G
N*
K
I
O*
J*
3 HOMEDEPOT.COM/GLACIERBAY
Pre-installation (continued)
PACKAGE CONTENTS
Part Description Quantity
A Faucet 1
B Aerator 1
C Mounting nut 2
D Drain ange 1
E Rubber washer 1
F Lock nut 1
G Drain body 1
H Pop up stopper 1
I Lift rod 1
J Thumb screw 1
K Lift rod strap 1
L Spring clip 1
M Ball rod 1
N Ball nut 1
O Bushing 1
P Gasket 1
NOTE: *Items come pre-assembled.

1
2
4
Installing the faucet assembly Preparing the pop-up assembly
Shut off the water supply. Remove the old faucet.
Place the faucet (A) through the mounting holes
in the sink.
Ensure the gasket (P) is on the bottom of the new
faucet (A).
Clean off the mounting surface.
Secure the faucet (A) to the sink using the
mounting nuts (C) provided.
Installation
12
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
NOTE: If the sink is uneven, use silicone under the
gasket (P).
H
D
E
F
G
Remove the pop up stopper (H) and drain ange (D)
from the drain body (G).
Screw the lock nut (F) all the way down, and push
the rubber washer (E) down.
A
P
C

G
F1
D
SILI
E
1
2
1
1
2
3
Insert 2
H
G
O
MN
L
Insert 1
1
5 HOMEDEPOT.COM/GLACIERBAY
Installing the drain body Installing the stopper and ball rod
Insert the pop up stopper (H) into the drain hole in
the sink.
Apply silicone sealant (not included) under the drain
ange (D) and place the drain ange (D) over the
drain hole in the sink.
From underneath the sink, screw the drain body (G)
onto the drain ange (D). Ensure that the opening (1)
for the ball rod on the drain body (G) faces towards
the rear of the sink.
Tighten the rubber washer (E) and lock nut (F) on the
drain body (G).
Remove the spring clip (L) from the ball rod (M).
Secure the bushing (O) and ball nut (N) against the
hole in the drain body (G) and tighten the ball nut
(N) onto the threaded end. Do not overtighten.
Installation (continued)
4
Remove the ball nut (N). Insert the ball rod (M) into
the drain body (G) and through the hole of the pop
up stopper (H). See insert 1.
For easier removal and cleaning, rotate the pop up
stopper (H) 90 degrees so that the ball rod (M)
does not go through the hole in the pop up stopper
(H). See insert 2.
3
NOTE: In shallow cabinet installations, the ball rod (M)
may need to be shortened. Use a hack saw to cut the
end of the rod, away from the ball, to the desired length.

ML
K
2
1
3
2
6
Attaching the ball rod and strap
Installing the lift rod
Adjusting the lift rod
Insert the lift rod (I) through the faucet (A) and
down into the lift rod strap (K). Tighten the thumb
screw (J).
Loosen the thumb screw (J) on the lift rod strap (K).
Attach the ball rod (M) to the lift rod strap (K) using
the spring clip (L).
Push down on the lift rod (I) until the drain is in the
open position. Retighten the thumb screw (J).
Installation (continued)
65
7
K
I
J
J
I
A
I
K
J
J

7 HOMEDEPOT.COM/GLACIERBAY
IMPORTANT: After installation is complete, remove
the aerator to the flush the water lines. Do not lose the
gasket in the aerator.
Flushing and checking for leaks
Ensuring the handles are in the off position, turn on
the water supply and check for leaks. If you discover
any leaks, check your connections to ensure they are
installed properly.
Use the aerator wrench to remove the aerator (B) and
housing (if applicable). Turn on the hot and cold handles
to allow the water to run for at least one minute. This
ushes away any debris that could cause damage to
internal parts.
Turn off the water and reinstall the aerator and housing
(if applicable).
1
A
B
Installation (continued)
Operation
Making the water supply connections
2
3
1
Use 1/2 in. I.P.S. faucet connections (1), or a 3/8 in.
O.D. ball-nose riser (2) with supply line coupling
nuts (3) (not included).
Use a wrench to tighten the connections. Do not over
tighten or torque the copper supply line.
8

8
Care and Cleaning
To clean, wipe down with a damp cloth and towel dry.
Do not use abrasive cleaners, steel wool, or harsh chemicals when cleaning this faucet, or the warranty will
be voided.
Troubleshooting
NOTE: Refer to the service parts section in this manual for a
detailed drawing showing the location of the parts listed below.
Problem Possible Cause Solution
There are leaks from the
handle.
□The bonnet nut is loose.
□The O-ring on the cartridge is dirty
or damaged.
□Tighten the bonnet nut.
□Clean or replace the O-ring.
The aerator leaks or has a
reduced water ow.
□The aerator is dirty or mis-tted.
□The cartridge may be clogged.
□Remove the aerator and check for
debris.
□Remove the cartridge and check for
debris.
□Ensure the aerator is properly
installed.
The water will not shut off
completely.
□The locking nut is loose or car-
tridge is not positioned correctly.
□Remove the handle and cartridge to
check the rubber seat and spring.
□Tighten the lock nut.
□Clean or replace.
The sink drain at the base of
the sink is leaking.
□The sink surface is rough or
irregular.
□Apply additional silicone sealant to
the beveled side of the drain ange.
□Retighten and test for leaks.

3.
7.
2.
5.
1.
8.
9.
10.
11.
12.
13.
Faucet ID Tags can
be found by removing
the hot water handle
DO N OT REMOVE
4.
6.
14.
9 HOMEDEPOT.COM/GLACIERBAY
Service Parts
Part Description Part No.
1 Handle (H or C) A069382*
2 Index button & set screw A66G325
3 Handle adaptor (C) A66D574C
4 Handle adaptor (H) A66D574H
5 Bonnet nut & washer A663631*
6 Ceramic disc cartridge (C) A507104N
7 Ceramic disc cartridge (H) A507103N
Part Description Part No.
8 Gasket A011005*
9 Mounting nut A504023*
10 Aerator A500026N-51-T*
11 Lift rod A025041*
12 Drain assembly less lift
rod A556012L*
13 Aerator wrench A031245NI
14 Hex wrench A031000NI
*Specify Finish
Many replacement cartridges, aerators, and drain
assemblies can be purchased at your local The
Home Depot store or online at HOMEDEPOT.COM

Questions, problems, missing parts?
Before returning to the store, call Glacier Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday
9 a.m. - 6 p.m., EST, Saturday
1-855-HD-GLACIER (1-855-434-5224)
HOMEDEPOT.COM/GLACIERBAY
Retain this manual for future use.