Glamour Home GHDSV-1455 User manual

SCREWDRIVER HAMMER
SELF-PREPARED TOOLS: Tools below are NOT included in package.
Read instruction carefully . See Furniture Parts list and Hardware List for guidance . Be sure you have all parts before you start assembling .
Place and assemble furniture on a clean flat soft surface , such as carpet or rug to pervent being scratched .
Before you begin, please follow assembly instructions carefully, then follow them step by step.
Reminder:
Please ensure that all surfaces and edges with colours/laminations are facing forward/outward.
PART LIST QTY HARDWARE
A
B
C
ALLEN KEY M4 1 PC
MODEL : ASSEMBLY INSTRUCTIONS PAGE: /3
1
1
1
2
METAL SUPPORT
3
MIDDLE PANEL
METAL SIDE
4 PCS
2 PCS
4 PCS
JCBC Screw M6 x 15MM
JCBC SCREW M6 X 30MM
E
TIPPING PACK WITHOUT AI
E1
E2
E3
E4 E5 2 SETS
4 PCS
16 PCS
2
2
4
METAL PLATE
42 PCS JCBC SCREW M6 X 40MM
D8 PCS
1
1
1
3
3
3
3
GHDSV-1455

STEP 1 STEP 2
STEP 3 STEP 4
MODEL : ASSEMBLY INSTRUCTIONS PAGE: /3
2
Connect Metal Side (2) to panel (1) by using hardware A and C.
(Repeat 16 times.)
HARDWARE
A
Connect Metal Plate (4) to Metal Side (2) by using
hardware A and B.
(Repeat 4 times.)
HARDWARE
A
ROTATE
x16
C
A
ROTATE
x4
B
A
Assemble hardware E1 into panel (1) by using hardware E2.
(Repeat 2 times.)
ROTATE
x2
E1
E2
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
3
SCREWDRIVER
REQUIRED
Connect Metal Support (3) to Metal Side (2) by using
hardware A and D.
(Repeat 8 times.)
HARDWARE
A
ROTATE
x8
D
A
2
2
3
3
GHDSV-1455

STEP 5 STEP 7
MODEL : ASSEMBLY INSTRUCTIONS PAGE: /3
3
- Mark and use the power drill
to drill a hole on the wall.
- Hit hardware E3 into the wall.
(Repeat 2 times.)
HAMMER
REQUIRED
POWER
DRILL
REQUIRED
- Assemble hardware E1 to E3 by using hardware E4.
(Repeat 2 times.)
- Connect both of the hardware E1 by using hardware E5.
- Tighten the hardware E5.
(Repeat 2 times.)
HIT
ROTATE
TIGHTEN
CONNECT
SCREWDRIVER
REQUIRED
x2
E3
x2
E1
E3
E4
x2
E1
E1
E5
x2
E1
E1
E5
1
1
1
1
1
1
1
1
1
STEP 6
1
1
1
GHDSV-1455