Glancetron 1300B User manual

Glancetron 1300B
User Manual
www.glancetron.com

This equipment has been tested and found to comply with the limits of Class A digital
devices. Pursuant to Part 1 of the FCC Rules, these limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment, if not installed and used in accordance with the instructions, may cause
harmful interference. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try correcting the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This booklet is
available from the U.S. government Printing Office, Washington, DC 20402, Stock NO.
004-000-0034 -4.
CAUTION: Any changes or modifications not expressly approved by the guarantee of
this device could void the user's authority to operate the equipment.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that
may cause undesired operation.

Introduction
JB-1300B iButton key reader is a smart device specially designed to be used with
Dallas iButton keys.
Customer may use JB-1300 to read ID and data from an iButton key by contact, once
the key touches the gutter of reader, then key data will be sent to a receiver such as a
personal computer through the PS2 / RS232 / USB-KB / USB-RS232 interface.

Specification
I/O Port: One RJ-4 phone Jack
One gutter for key set
Indicator: Green LED will turn on when powered on
Orange to indicate the operation status
Red for error status
Mechanical: Diameter: 12.6 cm
Height: 2. cm
Weight: 800g
Cable: Standard: USB-KB cable
Optional: USB-RS232 cable, Standard RS232 cable,
PS2 keyboard cable
Key Dimension: Diameter: 2. cm
Height: 0.6cm
Environment: Operating temperature: 0°C-40°C
Storage temperature: -20°C-60°C
Humidity: 10%-90% RH (non-condensing)

Cables
USB-HID, USB-RS232:
RS232:

PS2 Keyboard:

Programming
The files in the CD:
1 Run “(Read Notes) 1300B v20 exe “ in Windows
Please note: if an error occurs, please right click on the exe file
and choose “Run as administrator”.
2 The iButton ID output settings:
1300B reads the iButton ID (16 characters) and sends it to the HOST (PC) when
the user puts an iButton on the socket. The output block format is:
[Prefix] [ID 16 characters] [Postfix] [Delimiter]
When the iButton is removed, 1300B will output:
[OnRemove characters]

Fields:
[Prefix Characters]: The lead of output data block, max 7 characters
[Start from character] : Set at which character (1 to 16) to start reading the "ID 16
characters" block, default is 1.
[Number of character] : Set how many characters (1 to 16) of "ID 16 characters" will
be sent, default is 16.
[Postfix characters] : The end of output data block, max 7 characters.
[Delimiter]: Set a line feed, return, etc. that will be sent after the data block, default
is <CR>+<LF>
[OnRemove characters]: Max 7 characters for notes when the iButton is removed.
[Buzzer sound] : Enable / Disable the beep sound when 1300B reads the iButton.
[Baud Rate] : The RS232 baud rate setting for RS232/USB-RS232 interface cables.
[PS2 Keyboard Locked]: Enable / Disable standard PS2 keyboard lock the iButton
is not on the socket, only for PS2 interface cable.
[Always CapsLock ON]: CapsLock will auto ON when sending data, only for USB-KB
interface cable.

3 The Function [File]:
[Open file]: To open a settings file , the fields data on the screen will be replaced.
[Save file]: Save all settings to a file, type the file name manually to save as a
different file.
[Clear all setting fields to default]: This will set all fields to default value.
[Exit]: This will close the programming tool.
4 The Function [Programming]:
Notes: The programming tool does not support PS2 interface programming.
[Write settings to 1300]: Write all settings to 1300B, the programming tool will
Auto search the 1300B on all interfaces (USB-HID,
USB-RS232, RS232) and show the results on the status
message window.
[Read settings from 1300]: To read all settings from 1300B.
[Reset 1300 settings to default]: This will reset 1300B to factory default settings.
[Read version from 1300]: To read firmware version of 1300B.
[Firmware update]: Update the 1300B firmware to new released firmware.

5 The Function [Communication] :
[Start Test]: To test reading iButton data with 1300B. This is helpful to test the
settings. Which programmed to 1300B before. Will auto search the 1300B on all
interfaces, the data will be showed on the status message window.
[End Test]: End 1300B communication.
6 The Function [Release notes]:
The history of programming tool release notes