GlassOuse GS03 User manual

GS03 - FINGER SWITCH USER MANUAL
WARNINGS
• While removing your Finger Switch from your
GlassOuse or other devices, pay attention not
to damage the wire joining points both on the
3.5mm jack connector and the Finger Switch
module parts.
•Heavily tightened straps may cause harm, so
please do not wrap the touch- fastener straps
tightly.
7th Floor, Huarong Building, Qiaolian East, Bulong Road,
Longgang District, 518129, Shenzhen, Guangdong, China
P. 0086-755-8920-5835 F. 0086-755-8980-5835-812
[email protected] | www.glassouse.com | www.ennopro.com
FINGER SWITCH
Having been tested 200.000 times under 3 tons of pressure, even
though Finger Switch is genuinely designed for GlassOuse V1.2,
you can connect it to any kind of adapted device offering a mono
3.5mm jack connector plug in for external switch controls since
it works with short circuit low signals yet it is highly sensitive. The
built-in button switch can detect the slightest pressing actions as
well as high pressures.
Made of durable and solid materials, its long cable allows you to
adjust the switch position according to your needs. With its sticky
bottom, Finger Switch can be placed on fabric surfaces and can
operate as a regular button. Alternatively, by simply sticking your
Finger Switch to touch-fastener straps, you can use the switch
in different positions and with different parts of your body. You
can use it with your finger, with your arm, with your head and
any part of your body by simply wrapping the touch-fastener
strap and securing the Finger switch onto it. In addition, it is super
lightweight - only 13.5 grams.

USER MANUAL
7th Floor, Huarong Building, Qiaolian East, Bulong Road,
Longgang District, 518129, Shenzhen, Guangdong, China
P. 0086-755-8920-5835 F. 0086-755-8980-5835-812
[email protected] | www.glassouse.com | www.ennopro.com
SWITCH CONNECTION
1. Plug Finger Switch to Glassouse V1.2 or any 3.5mm jack adapted device via mono 3.5mm jack connector.
2.1. Wrap the touch-fastener strap properly to your finger, arms or any part of your body to do pressing action
comfortably and tighten it.
2.2. Stick the Finger Switch to the touch-fastener strap you wrapped.
2.3. Adjust the position of Finger Switch onto the touch-fastener strap to feel comfortable enough to do pressing
action and secure it by simply pressing it.
OR
2.1. Simply stick your Finger Switch to a fabric surface.
GS03 - FINGER SWITCH
Lenght: 18.5mm x Width: 18.5mm x Thickness: 11mm
Weight: 13.5g
Cable Length: 110cm
Activation Force: 200-g
Touch Fastener: 150mm x 15mm x 2mm
DEVICE
3.5MM
JACK
STICKY
BOTTOM
BUTTON