GLD Products 70-0105 User manual

GLD Products Arlington Table Tennis
Item 70-0105
Item 70-0105
September 2013 UPC Code 7-19265-51827-3
ARLINGTON
TABLE TENNIS
Replacement Parts
Order direct at www.gldproducts.com
or call our Customer Service department at
(800) 225-7593
8 am to 4:30 pm Central Standard Time

GLD Products Arlington Table Tennis
Item 70-0105
Staple your receipt here.
Important: A copy of your receipt will be needed to activate your warranty (see page 11)

GLD Products Arlington Table Tennis
Item 70-0105
3 1-800-225-7593
www.gldproducts.com
Congratulations and THANK YOU for purchasing the
Arlington Table Tennis. You have chosen a product
that should provide years of entertainment. To assist
you with customer service and warranty claims, sta-
ple your receipt to the inside cover, then keep this
manual in a safe place for future reference.
GLD Products
S84 W19093 Enterprise Drive
Muskego, WI 53150 USA
1-800-225-7593
Fax: 1-800-841-6944
Email: [email protected]
Web: www.gldproducts.com
This manual may have been updated. For the latest manual visit the GLD products website.
Place your package near the location where it will be used. Carefully unpack
all components and verify you have all the correct pieces.
If you notice missing or defective parts, please call us at:
1-800-225-7593 ext 113.
Please read and understand all instructions before beginning assembly.
This assembly will require 2 adults.
This product is not for use by children without adult supervision.

GLD Products Arlington Table Tennis
Parts Identifier Item 70-0105
1-800-225-7593 4
www.gldproducts.com
Part
No./
Qty
Illustration/
Order Number
Part
No./
Qty
Illustration/
Order Number
Part
No./
Qty
Illustration/
Order Number
1
Qty.
1
Table Assembly
2
Qty.
4Caster Support
Order No. 9-70
3
Qty.
8
Hex Head Bolt
M8 x 40 mm
Order No. 9-10
4
Qty.
2Wing Bolt M6 x 50 mm
Order No. 9-2
5
Qty.
8
Washer 8 mm I.D.
Order No. 9-11
6
Qty.
2Wing Nut M6
Order No. 9-13
7
Qty.
2
Bushing
Order No. 9-5
8
Qty.
8
Hex Nut M8
Order No. 9-12
9
Qty.
4Locking Caster Wheel
Order No. 9-67
10
Qty.
4Caster Wheel
Order No. 9-66
11
Qty.
2Table Lock
Order No. 9-9
12
Qty.
1
Net
Order No. 9-68
13
Qty.
2
Washer 6 mm I.D.
Order No. 9-3

GLD Products Arlington Table Tennis
Item 70-0105
5 1-800-225-7593
www.gldproducts.com
IF YOU HAVE A WARRANTY CLAIM, CALL US FIRST
Please see page 11.
GLD Products
Available 8 am to 4:30 pm Central Standard Time
S84 W19093 Enterprise Drive
Muskego, WI 53150 USA
1-800-225-7593
Fax: 1-800-841-6944
Email: [email protected]
Web: www.gldproducts.com
For all claims, please have your receipt and item number when you call. The
product item number can be found on the front cover.
If you are instructed to return the product for service, you are
responsible for shipping the unit at your expense.
PRODUCT REGISTRATION
Important: The product registration form on page 13 and a copy of your
receipt must be completed and returned within 10 days of purchase to
validate your warranty.
Online registration is also available. Go to
www.gldproducts.com/index.php/registration or click on this link. Follow the
online instructions.
Preparing for Assembly
• Be sure to unpack all of the parts included in this package. Some
parts may be in obscure locations of the packaging. Check inside
any tubes or sleeves. Save all packing material until the product is
fully assembled and functional.
• Compare the parts in your package with the Parts Identifier
description on page 4.
• After unpacking large products, some disassembly may be required
prior to beginning the assembly.
Tools Required
• 13 mm Wrench (not included)
• Level (not included)

GLD Products Arlington Table Tennis
Item 70-0105
6 1-800-225-7593
www.gldproducts.com
Precautions to Prevent Personal Injury and Damage
• Indoor only tables will not withstand outdoor conditions. If using the
table outdoors, move it indoors as soon as possible.
• Be alert for surface changes when moving the table. Cracks and
changes in the slope may cause the table to tip over.
• The table is not designed for supporting heavy loads. Do not place
heavy items on the table. Collapse of the support structure is
possible. Do not sit or stand on the top of the table.
• When using the table all the support legs and wheels must be in
contact with the floor. Failure to properly support the table may
damage the frame and table top.
• Opening or closing the table presents a risk for pinching. Keep all
children away and alert adults when moving the table top up or
down.
• Liquids left on the playing surface for extended peroids will damage
the table top. Wipe up any spills immediately.
For Outdoor Tables
• Strong winds may move or tip the table over. Take precautions as
needed to prevent damage or injury.
• Do not leave balls or paddles outside. They will likely be damaged
by outdoor conditions.
Assembly Tips
Make sure you understand the following before you begin to assemble your table tennis.
1. READ THIS MANUAL all the way through before beginning assembly.
2. Some drawings or images in this manual may not look exactly like your product.
3. You will need a second adult to assist with this assembly.
Note: Save all packing materials until the parts have been inspected and the table is
assembled.
Unpack the Pieces
• Lay the box on a flat surface (floor). You may want this near your
area of assembly.
• Unpack the boxes and part bags. Inspect and count the parts. The
Parts Identifier page can be used to record your results.
• If any parts are damaged or missing contact GLD customer service.
• Missing fasteners may be purchased at a hardware store using the
descriptions on the Parts Identifier page(s).

GLD Products Arlington Table Tennis
Item 70-0105
7 1-800-225-7593
www.gldproducts.com
STEP 1 - CONNECT CASTER SUPPORTS TO TABLE
The table uses four casters that lock (#9) and four casters that do not lock (#10). Each half
of the table has two caster supports (#2).
1. Locate the four caster supports (#2).
2. Screw a locking caster(#9) and a non-locking caster (#10) into each caster support (#2).
3. Tip the table assembly (#1) and open the legs.
4. Place the shaft of the casters support (#2) over the inside leg. Line up the holes and
insert two bolts (#3) thru both pieces. Secure the connection with washers (#5) and nuts
(#8). Repeat for the other three legs.
5
2
3
8

GLD Products Arlington Table Tennis
Item 70-0105
8 1-800-225-7593
www.gldproducts.com
STEP 2 - ASSEMBLE THE TABLE LOCK
When the tables are lifted up, a locking clip will hold the bottom of the table in position.
1. Position a table lock (#11) so the arm is on the inside of the table leg.
2. Insert a wing bolt (#4) thru the leg. Put a bushing (#7) onto the end of the wing bolt (#4).
3. Place the table lock (#11) onto the wing bolt (#4) so the small diameter of the bushing
(#7) enters the hole in the table lock.
4. Secure the assembly with a washer (#13) and a wing nut (#6).
5. Repeat numbers 1 thru 4 to assemble the second table lock.
6
13
7
4
Table Leg
11
Top View
Location of Table Locks

GLD Products Arlington Table Tennis
Item 70-0105
9 1-800-225-7593
www.gldproducts.com
STEP 3 - OPENING AND CLOSING THE TABLE
CAUTION: Use two adults to open or close the table.
To Open the Table
1. Move the two halves apart.
2. Lock the casters.
3. Hold the top edge and release the table lock.
4. Bring the top edge towards you. The legs will open as the table swings down.
5. When the legs are fully open, snap the leg locks closed.
6. Repeat numbers 2 thru 5 on the second half of the table.
7. Move the tables together.
8. Attach the net by clamping the posts on both sides of the table. The net should be tight
and not sagging.

GLD Products Arlington Table Tennis
Item 70-0105
10 1-800-225-7593
www.gldproducts.com
To Close the Table
1. Remove the net.
2. Pull back on the leg locks.
3. With the casters locked, lift up on the end of the table.
4. As the table goes up, the legs will fold in.
5. When the table is fully up, the bottom edge will snap into the table lock.
CAUTION: Be certain the table is locked when in the raised position. If not properly locked,
the table can swing down causing damage or personal injury.
6. Repeat numbers 2 thru 5 on the second half of the table.
STEP 4 - LEVELING THE TABLE
The table should be set-up on a level surface. If the surface is slightly uneven the legs and
casters can each be adjusted about 3/8 inch. The leg adjusters are screwed in or out. The
casters have a ring between the caster and the support bar.

GLD Products Arlington Table Tennis
Item 70-0105
11 1-800-225-7593
www.gldproducts.com
90-DAY LIMITED WARRANTY
The Manufacturer warrants to the original retail purchaser that this product is free from
defects in material and workmanship under normal use and conditions for a period of ninety
(90) days from the date of original purchase. The Manufacturer’s liability is limited to the
repair or replacement, at its option, of any defective product and shall not include any liability
for indirect, incidental or consequential damages of any kind.
Should this product become defective due to material or workmanship within the warranty
period, contact our Customer Service Department. This warranty is not transferable and
does not cover normal wear and tear or damage caused by improper usage, negligence,
misuse, abuse, transportation damage, acts of nature, or accident (including failure to follow
the instructions in this manual). It does not cover expendable items such as batteries, light
bulbs, fuses, accessories, cosmetic parts and other items that wear out due to normal
usage. This warranty is also void if the product is disassembled and reassembled, dam-
aged, modified from its original state, or used for other than indoor personal residential use
(no commercial or rental applications).
This warranty gives you specific legal rights, and you may have other rights which vary from
state to state.
IF YOU HAVE A WARRANTY CLAIM, CALL US FIRST (8 - 4:30 CST)
Please have your receipt and item number (found on the front cover) when you call.
GLD Products
S84 W19093 Enterprise Drive
Muskego, WI 53150 USA
1-800-225-7593
Fax: 1-800-841-6944
Email: [email protected]
Web: www.gldproducts.com
If you are instructed to return the product for service, you are responsible for ship-
ping the unit at your expense to the above address in packaging that will protect
against further damage. All warranty or repair requests require a Return Authoriza-
tion Number prior to returning the item.
PRODUCT REGISTRATION
Important: The product registration form on page 13 must be completed and returned
along with a copy of your receipt within 10 days of purchase to validate your warranty.
Online registration is also available. Go to www.gldproducts.com/index.php/registration or
click on this link. Follow the online instructions.

GLD Products Arlington Table Tennis
Item 70-0105
12 1-800-225-7593
www.gldproducts.com
This page left intentionally blank.

REGISTER YOUR PRODUCT Place postage here
Complete this form, include a copy of your receipt, fold, tape (do
not staple) and return within 10 days of purchase. This protects
your warranty and will help us develop new products!
GLD Products
Warranty Department
S84 W19093 Enterprise Drive
Muskego, WI 53150 USA
Remember to attach a copy of your receipt.
Name Date of Purchase
Address Phone-Day
City Phone-Evening
State Zip Email
Purchase Price:
Item: 70-0105 Arlington Table Tennis
Store Name:
www.gldproducts.com
GAME TABLES HOME CASINO
GAMES AND ACCESSORIES BILLIARD CUES
BILLIARD ACCESSORIES DARTBOARDS
SOFT-TIP DARTS STEEL-TIP DARTS
FLIGHTS AND SHAFTS DART CASES AND ACCESSORIES
Fold here second.
Fold here first.
Cut here.

This page left intentionally blank.

Arlington Table Tennis
Item 70-0105
15 1-800-225-7593
www.gldproducts.com
Parts Re-Order Form
Method of Payment
_________Check or Money Order
_________ Credit Card
_____ Visa _____ MasterCard _____ Discover _____ American Express
Card #________________________________________________________
Security Code #__________________Billing Address ___________________________Zip Code____________
Signature______________________________________Exp. Date________
Shipping Address
Name___________________________________________________________________________________
Address___________________________________________Phone_________________________________
City______________________________________________State________________Zip________________
Name Date
Address Phone-Day
City Phone-Evening
State Zip Email
Order No. Description
Unit
Price
Each
Qty. Total
Amount
9-70 Caster Support 15.00
9-10 Hex Head Bolt M8 x 40 mm 2.00
9-2 Wing Bolt M6 x 50 mm 2.00
9-11 Washer 8 mm I.D. 0.50
9-13 Wing Nut M6 0.20
9-5 Bushing 0.25
9-12 Hex Nut M8 0.20
9-66 Locking Caster Wheel 7.00
9-67 Caster Wheel 5.00
9-9 Table Lock 5.00
9-68 Net 20.00
9-3 Washer 6 mm I.D. 0.50
Subtotal
Shipping will be added. If paid by Check or Money Order, call for quote. S/H
5.1% Waukesha Wisconsin tax will apply (subject to change). Tax
Total
Mail To: GLD Products
S84 W19093 Enterprise Drive
Muskego, WI 53150 USA
1-800-225-7593 · FAX 800-841-6944
Email: [email protected]
Web Site: www.gldproducts.com

Arlington Table Tennis
Item 70-0105
16 1-800-225-7593
www.gldproducts.com
_
Table of contents
Popular Robotics manuals by other brands

DH Robotics Technology
DH Robotics Technology AG-95 Short manual

KISS INSTITUTE FOR PRACTICAL ROBOTICS
KISS INSTITUTE FOR PRACTICAL ROBOTICS Wallaby Demobot Build guide

Makeblock
Makeblock mBot manual

Paddle Palace
Paddle Palace H2W TOUCH PRO user manual

ORION ROBOTICS
ORION ROBOTICS Odyssey Assembly guide

Mecademic
Mecademic Meca500 user manual

Barrett
Barrett WAM Wrist Maintenance Guide

Moorebot
Moorebot Scout quick start guide

bot'n roll
bot'n roll ONE A user manual

OTTO MOTORS
OTTO MOTORS 1500 V2 Operation and maintenance manual

Silverlit
Silverlit YCOO Bionic Biopod InMotion Cyberpunk instruction manual

Mitsubishi Electric
Mitsubishi Electric MELFA RH-3FHR3515 instruction manual