Glen SA 3081 N User manual

SA 3081 N
INDUCTION COOKER
U S E R ' S G U I D E

Identify your Induction Cooker
How Induction Cooking Works
• An electric voltage is applied on a conductor spool
beneath the ceramic glass.
• This produces a high-frequency electromagnetic field.
The field penetrates the metal of the ferrous (magnetic-
material) cooking vessel and generates heat.
• The heat generated in the cooking vessel is transferred
to the vessel's contents.
• Nothing outside the vessel is affected by the field. As
soon as the vessel is removed heat generation stops.
Operation & Touch Screen Display Panel
On/Off
Switch
Function
Selector Switch
Timer
Display Panel
Microcrystalline
Glass Plate
Operation &
Display Panel

Induction Cooking Advantages
• It is a powerful cooking medium, just like or even better than gas.
• Instant & precise heat control, unlike electric cooking where the elements take time
to heat and cool, resulting in lack of proper control on the dishes being cooked.
• There is no heat wastage as the energy is supplied directly to the cooking vessel
unlike gas or conventional electric cookers where they end up heating your kitchen
and you, instead of heating up the food.
• High safety no open flames, no fire hazards, no gas leakages. The glass top stays
cool that means no burnt fingers or hands.
• Once you take the cookware off the hotplate, the device automatically switches to
standby mode.
• The device detects whether suitable cookware is placed on the hotplate. If this is
not the case, no energy is transmitted.
• As the hotplate is only heated up indirectly via the bottom of the cookware, over
spilling food cannot stick and burn.
Setting up your Induction Cooker
• Check the device for visible damage.
• Place the device on a stable and level surface.
• Never place the device on a flammable surface (e.g. table cloth, carpet, etc.).
• Do not block the ventilation slots of the device. This may overheat the device. Keep
a minimum distance of 5 to 10 cm from the walls or other items.
• Do not place the induction Cooker next to devices or objects which react
sensitively to magnetic field (e.g. radios, TVs, cassette recorders, etc.).
• Do not place induction Cooker next to open fires, heater or other sources of heat.
• Make sure that the mains connection cable is not damaged or squashed beneath the
device and does not came into contact with sharp edges and / or hot surface.
• The device should be connected to a rolled-out extension cable with a maximum
length of 3m and a cross-section of 2mm. If an intermediate switch is used, it must
be rated at min. 16A.
Using your Induction Cooker
After the device has been turned on, select the appropriate function for your cooking
using the function selector switch. You can choose from a selection of pre-set
functions.

Soup Take 4 cups of soup stock in a pan. Select the soup function. After the set time,
the cooker switches to keep warm status.
Water This function is used for boiling or steaming. Select the water function.
These 5 functions are automatically preset by the factory and no adjustment is
possible.
Fry This is a function designed for cooking of vegetables etc. During cooking the
temperature and time can be adjusted as required.
Hot Pot This function is designed to boil water. During heating, you can adjust the
temperature and time as per your requirement. The timer can be adjusted anywhere
upto 240 minutes. In case of abnormally high heat, the cooker switches to standby
mode and starts re-heating after cooling down.
The default function and is selected automatically when the cooker is switched ON, or
if no other function is selected.
Note : The results may vary depending on the power supply, quality of ingredients and
the amount of water.
Timer The cooking can be set to a desired time with the help of the timer.
Touch the timer button, and adjust the display to set the time with the help of (+) and (-)
buttons.
Once set the display would flash the set time and then begin the countdown. After the
set time elapses the cooker will automatically switch to keep warm status off.
Heat Adjustment The cooker automatically sets to the required temperature in case
of pre-set functions. However it is possible to manually adjust it as per requirement in
case of Hot-Pot and Fry functions.
0 0
The temperature can be set manually to 8 levels (from 80 C to 270 C) using the (+) and
(-) buttons. The set Power level is displayed on the digital screen.
0 0
240 Minutes timer . Temperature Range 80 C to 270 C
Function Power Level Setting
HOT POT 2000 W Pre-set adjustable
ROTI 240 °C Degree Pre-set adjustable
FRY 240 °C Degree Pre-set adjustable
MIN 300 W Pre-set no adjustable
SOUP 1400 W Pre-set no adjustable
WATER 2000 W Pre-set no adjustable
MILK 80 °C Degree Pre-set no adjustable
STEAM 700 W Pre-set no adjustable

Rounded Bottom Pot Aluminum
Copper Pot
Bottom Measuring
Less than 12cm
Pot with Stands Ceramic Pot
Glass Pot
Heat-Resistant
Unsuitable Cookware
• Pots/pans with a diameter of less than 12 cm.
• Ceramic pots, heat-proof glass.
• Copper pots and pans, aluminium pots and pans.
• Cookware with feet.
• Containers with a curved bottom.
Error Code Reason Solution
E0 No pot/pan on the plate. Non- Put suitable cooking Utensils
usable pans on the plates on the plates.
E1 Abnormal voltage supply/ Please contact the supplier or go
low voltage to a qualified service center.
E2 IGBT temperature sensor Please contact the supplier or go
open. to a qualified service center.
E3 Abnormal supply voltage; Please check power supply. Power on
voltage too high. after power supply is back to normal.
E4 Plate surface temperature Please wait for some minutes until
sensor short-circuited: . the unit cools down. Please check
empty pot/pan heating pot/pan.
leads to too high temperature
E5 Fan failure: Air intake/ Please contact the supplier or go to a
exhaust vent block. qualified service center. Clean the vent
after the unit cools down, then can restart
E6 Abnormal supply voltage; Please check power supply. Power on
after power supply is back to normal.
E7 Coilpanel is not connected Please contact the supplier or go to a
well, circuit mal function. qualified service center.
Possible Error Messages and their Solution
Suitable and unsuitable cookware for induction cooking
Suitable Cookware
• Pots and pans with magnetic bottom, as stainless steel pots with iron bottom,cast
iron enameled pans.
• Flat-bottom pans and pots with a diameter of 12 to 22 cm with magnetic bottom.
• Max. weight pot and content should not exceed 6 kg.
Enameled Iron Pot Iron or Enameled Iron Pot Castiron Pan Iron Pot Deep-Fry Pan Stainless Steel Pot Iron Plate

Safety Precautions
• The hotplate surface is made up of temperature-resistant toughened ceramic glass.
However necessary precautions in handling of glass are very important. The
breakage of glass due to any reason is not covered under guarantee.
• In case of damage, even if this concern only a small tear, disconnect the device from
the power supply immediately and contact the customer service.
• We recommend not placing any metal kitchen utensils, cookware or pan lids,
knives or other metal objects on the hotplate. These may heat up when the device is
turned on.
• Place the hot pans in the hob area only. Never place them on the control panel or
the frame as this may result in melting of the plastic frame due to heat in the pan.
• Do not place any magnetics objects like credit cards, cassettes etc. on the glass
surface while the device is in operation.
• In order to avoid overheating, do not place any aluminium foil or metal plates on
the device.
• Warning: Please do not put the induction cooker on an iron / steel board, while
operating. Due to electromagnetic reason, the iron / steel board may heat and
damage the bottom of the induction cooker.
• Do not insert any objects like wires or tools into the ventilation slots. This may
cause electric shocks.
• Do not touch the hot surface of the ceramic field. Please note the induction hotplate
does not heat up itself during cooking, but the temperature of the cookware heats
up the hotplate!
• Do not heat up any unopened tins on the induction hotplate. A heated tin could
explode; therefore remove the lid under all circumstances beforehand.
• If you do not use the device for an extended period, we recommend you disconnect
it from the electric outlet.
• Never touch the device and the power plug with wet hands.
• Do not connect the device to the same outlet with other devices.
Connect the device to a suitable outlet.
• Never move the device by pulling on the power cable.
• Do not move the induction hotplate during cooking or with hot cookware on
top of it.
• Never use the device when it does not function properly, shows damage or in case it
was dropped.
• Do not leave the device unsupervised during operation. Keep children and other
incompetent persons as well as persons under influence of drugs or alcohol away
from the device.

Cleaning and Maintenance
• Unplug the power prior to cleaning the device. Do not use any caustic
cleaning agents and make sure that no water penetrates the device.
• To protect yourself from electric shock, never immerse the device, its cables
and the plug in water or other liquids.
• Wipe off the ceramic field with a damp cloth or use a mild, non-abrasive soap
solution.
• Wipe off the casing and the operating panel with a soft cloth or a mild detergent.
• Do not use any petrol products as they may damage the plastic parts and the
casing/operating panel.
• Do not use any flammable, acidy or alkaline materials near the device, as this may
reduce the service life of the device and lead to deflagration when the device is
turned on.
• Make sure that the bottom of the cookware does not scrape across the surface of the
ceramic field, although a scratched surface does not impair the use of the device.
• Make sure that the device was properly cleaned before storing it in a dry place.
Specifications
Model No. SA 3081 N
0 0
Temperature range : 80 to 270 C
Power : 2000 Watt
Connection : 230 V AC 50 Hz
Dimensions I/w/h : 280 x 350 x 42 mm
• Warning: This appliance is not intended for use by persons (including children)
with limited physical, sensory or metal abilities or who lack the necessary
experience and / or skills unless these persons act under the supervision of a person
responsible for their safety or they were instructed by such a person on how to use
the appliance.
• Do not submerge the device in water or other liquids and do not wash it in the
dishwasher.
• Only qualified experts may perform repair and maintenance work on the device
using original replacement and accessory parts. Never attempt to repair the device
yourself!
• Scientific tests have proven that induction hotplates do not pose a risk. However,
persons with a pacemaker should clear with their doctor weather to take care of
some special handling advises.

This GLEN Induction Cooker is fully warranted against any defect arising out of defective materials or faulty
workmanship for a period of 2 years from the date of purchase. Should any defect develop in this product, the
customer should bring the product to the nearest authorised service centre, where the company undertakes to
get the product repaired free of charge.
This warranty is not valid if :
l The use and care instructions have not been followed.
l Defects are caused by accident, misuse, abuse or commercial use.
l The repair work is carried out by persons not authorised by the company.
l Any modification or alteration of any nature is made in the product.
l Normal wear & tear of the product is not covered under warranty
l The Bill/Cash memo and copy of warranty card is not presented.
Under no circumstances, whether based on limited warranty or otherwise shall the company be liable for
incidental, special or consequential damages. Use of product indicates acceptance by you of the aforesaid
terms and conditions.
DEALER’S STAMP & SIGNATURE
PRODUCT NAME : INDUCTION COOKER SA 3081 N
SERIAL NO. :
DATE OF PURCHASE :
Imported & Marketed by/In case of customer complaints Contact Manager - Customer Support
Glen Appliances Pvt. Ltd.
I-34, DLF Ind. Area, Phase-I, Faridabad, India.Phone [phone]
E-mail : [email protected], [email protected] Website : www.glenindia.com
Manufactured for GLEN by:
KANZ ELECTRICAL INDUSTRIES, Plot No. 16, HIMUDA Industrial Area, Phase-IV, Bhatoli Kalan,
Baddi, HP-173205 INDIA