GLITZHOME 1010202648 User manual

Assembly Instruction
BAR CART

1
PARTS LIST
BAR CART FRAME (A) TOP MIRRORED
SHELF (B)
BOTTOM MIRRORED
SHELF (C)
Qty: 1
CASTERWITH LOCKING
(E)
Qty: 2
Qty: 1 Qty: 1
Qty: 8 Qty: 1 Qty: 1
HARDWARE LIST
SPANNER (H)
Qty: 2
CASTER (D)
SHORT BOLT (F)
M6 x 25MM
ALLEN KEY (G)
PRE-ASSEMBLY PREPARATION
•CAUTION: Assembly will require at least 2 adults. DO NOT use power tools.
Please inspect all items BEFORE assembly. If for any reason you need to return this item, please kindly
return it in it's original packaging.
•WARNING!
1. DO NOT let any sharp objects touch or rub the surface of the product.
2. When assembling, do not let children play around the working area.
3. DO NOT tighten all bolts and screws completely until the entire unit has been assembled and set up.
4. DO NOT USE if this product become damaged, and/or components are broken or missing.
•
MAINTENANCE: Please periodically check all fittings and re-tighten as necessary.
CARE AND CLEANING: DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning.
Clean with mild soap on a soft rag. Rinse and dry thoroughly.
•

2
STEP 2
Attach the Top Mirrored Shelf (B) to the top position of Frame (A) by using Bolt (F) and Allen
Key (G) as shown in below diagram.
STEP 1
Attach the Bottom Mirrored Shelf (C) to the bottom position of Frame (A) by using Bolt (F) and
Allen Key (G) as shown in below diagram.
C
A
G
B
F
F
G

3
STEP 3
STEP 4
After initial assembly, the product may acclimate to its new environment. Please ensure all
screws are still securely tightened.
Attach the Caster (D) and Caster with locking (E) to the Frame (A) by using Spanner (H).
H
D
E