Global American Inc. 3308170 User manual

User’s Manual
Single B oard Computer3308170
Version 1.0,
Month 2008

Copyrights
This manual is copyrighted and all rights are reserved. It does not allow any
non authorization in copied, photocopied, translated or reproduced to any
electronic or machine readable form in whole or in part without prior written
consent from the manufacturer.
In general, the manufacturer will not be liable for any direct, indirect, special,
incidental or consequential damages arising from the use of inability to use
the product or documentation, even if advised of the possibility of such
damages. The manufacturer keeps the rights in the subject to change the
contents of this manual without prior notices in order to improve the function
design, performance, quality and reliability. The author assumes no
responsibility for any errors or omissions, which may appear in this manual,
nor does it make a commitment to update the information contained herein.
Trademarks
Intel is a registered trademark of Intel Corporation.
Award is a registered trademark of Award Software, Inc.
All other trademarks, products and or product's name mentioned herein are
mentioned for identification purposes only, and may be trademarks and/or
registered trademarks of their respective companies or owners.

Index
Table of Contents
Chapter 1 Introduction ...........................................................1
1.1 Copyright Notice.................................................................. 2
1.2 Aboutthis User's Manual.......................................................2
1.3 Warning ...............................................................................2
1.4 Replacing thelithium battery .................................................3
1.5 Technical Support ................................................................ 3
1.6 Warranty ............................................................................. 4
1.7 Packing list.......................................................................... 5
1.8 Cable Kit............................................................................. 5
1.9 Ordering Information.......................................................... 6
1.10 Specification ......................................................................7
1.11 Board dimensions .............................................................. 8
Chapter 2 Installation ............................................................ 9
2.1 Board layout ........................................................................ 10
2.2 Jumpers andConnectors ...................................................... 11
Chapter 3 BIOS ...................................................................... 25
3.1 BIOS Introduction ................................................................ 26
3.2 BIOS Setup ......................................................................... 26
3.3 Standard CMOS Features ..................................................... 27
3.4 Advanced BIOS Features ..................................................... 29
3.5 Advanced Chipset Features .................................................. 33
3.6 Integrated Peripherals ..........................................................36
3.8 PNP/PCI Configurations ....................................................... 45
3.9 PC Health Status ................................................................. 46
3.10 Frequency/Voltage Control ................................................. 47
3.12 Set Password .....................................................................48
3.13 Save & Exit Setup ...............................................................49
3.14 Exit Without Saving ............................................................ 49
3.15 BIOS memory map ............................................................. 50
3.16 Award BIOS Post Codes ......................................................50
Chapter 4 Appendix ............................................................... 56
4.1 I/O Map ............................................................................... 57
4.2 IRQ Map ..............................................................................58
4.3 Example of Watch Dog codes ................................................ 58
3.7 Power Management Setup ................................................... 42
3.11 Load Optimized Defaults ..................................................... 47
Introduction
1Chapter 1
Introduction
Chapter 1 - Introduction

Index
Table of Contents
Chapter 1 Introduction ...........................................................1
1.1 Copyright Notice.................................................................. 2
1.2 Aboutthis User's Manual.......................................................2
1.3 Warning ...............................................................................2
1.4 Replacing thelithium battery .................................................3
1.5 Technical Support ................................................................ 3
1.6 Warranty ............................................................................. 4
1.7 Packing list.......................................................................... 5
1.8 Cable Kit............................................................................. 5
1.9 Ordering Information.......................................................... 6
1.10 Specification ......................................................................7
1.11 Board dimensions .............................................................. 8
Chapter 2 Installation ............................................................ 9
2.1 Board layout ........................................................................ 10
2.2 Jumpers andConnectors ...................................................... 11
Chapter 3 BIOS ...................................................................... 25
3.1 BIOS Introduction ................................................................ 26
3.2 BIOS Setup ......................................................................... 26
3.3 Standard CMOS Features ..................................................... 27
3.4 Advanced BIOS Features ..................................................... 29
3.5 Advanced Chipset Features .................................................. 33
3.6 Integrated Peripherals ..........................................................36
3.8 PNP/PCI Configurations ....................................................... 45
3.9 PC Health Status ................................................................. 46
3.10 Frequency/Voltage Control ................................................. 47
3.12 Set Password .....................................................................48
3.13 Save & Exit Setup ...............................................................49
3.14 Exit Without Saving ............................................................ 49
3.15 BIOS memory map ............................................................. 50
3.16 Award BIOS Post Codes ......................................................50
Chapter 4 Appendix ............................................................... 56
4.1 I/O Map ............................................................................... 57
4.2 IRQ Map ..............................................................................58
4.3 Example of Watch Dog codes ................................................ 58
3.7 Power Management Setup ................................................... 42
3.11 Load Optimized Defaults ..................................................... 47
Introduction
Packing List
13308170
3.5
” Embedded Board
1 x Driver CD
1 x Quick Installation Guide
1 x CPU Cooler
90 x 66 x 27.8mm (L x W x H)
1 x ATX Power cable
ATX main power connector (2x10 pins) to EmCORE-i9651
power connector (2x5 pins)
If any of the above items is damaged or missing, contact your vendor
immediately.

Index
Table of Contents
Chapter 1 Introduction ...........................................................1
1.1 Copyright Notice.................................................................. 2
1.2 Aboutthis User's Manual.......................................................2
1.3 Warning ...............................................................................2
1.4 Replacing thelithium battery .................................................3
1.5 Technical Support ................................................................ 3
1.6 Warranty ............................................................................. 4
1.7 Packing list.......................................................................... 5
1.8 Cable Kit............................................................................. 5
1.9 Ordering Information.......................................................... 6
1.10 Specification ......................................................................7
1.11 Board dimensions .............................................................. 8
Chapter 2 Installation ............................................................ 9
2.1 Board layout ........................................................................ 10
2.2 Jumpers andConnectors ...................................................... 11
Chapter 3 BIOS ...................................................................... 25
3.1 BIOS Introduction ................................................................ 26
3.2 BIOS Setup ......................................................................... 26
3.3 Standard CMOS Features ..................................................... 27
3.4 Advanced BIOS Features ..................................................... 29
3.5 Advanced Chipset Features .................................................. 33
3.6 Integrated Peripherals ..........................................................36
3.8 PNP/PCI Configurations ....................................................... 45
3.9 PC Health Status ................................................................. 46
3.10 Frequency/Voltage Control ................................................. 47
3.12 Set Password .....................................................................48
3.13 Save & Exit Setup ...............................................................49
3.14 Exit Without Saving ............................................................ 49
3.15 BIOS memory map ............................................................. 50
3.16 Award BIOS Post Codes ......................................................50
Chapter 4 Appendix ............................................................... 56
4.1 I/O Map ............................................................................... 57
4.2 IRQ Map ..............................................................................58
4.3 Example of Watch Dog codes ................................................ 58
3.7 Power Management Setup ................................................... 42
3.11 Load Optimized Defaults ..................................................... 47
Introduction
1.9 Specications
Form Factor 3.5” Embedded Board
CPU mPGA 478 Socket for Intel® Core™ 2 Duo Processor, up
to FSB 800MHz
Chipset Intel®GME965 + Intel®ICH8M
System Memory 1 x 200-pin SO-DIMM socket Up to 2GB DDR II
533/667MHz SDRAM
VGA/ LCD Controller Mobile Intel® Graphics Media Accelerator (GMA) X3100
graphics core w/ CRT/ LVDS 24-bit dual Channel
Ethernet 2 x Realtek 8111B PCIe 10/100/1000 Base-T Fast
Ethernet LAN
I/O Chips Winbond W83627HG
BIOS AMI PnP Flash BIOS
Audio Realtek ALC888 HD Codec, MIC-in/Line-in/Line-out
Serial ATA 2 x Serial ATA 300MB/s HDD transfer rate
IDE Interface 1 x IDE (Ultra ATA 33), support 2 IDE devices
Serial Port 2 x COM port (COM1: RS-232; COM2: RS-232/422/485)
Parallel Port/ Floppy 1 x LPT Port (SPP/EPP/ECP mode selectable)
1 x Floppy connector share with LPT port
IrDA 1 x IrDA connector
KBMS Standard PS/2 Keyboard and Mouse
Universal Serial Bus 6 x USB 2.0 compliant
DIO 8-bit programmable Digital I/O
Expansion Interface 1 x CF II Socket (Share with IDE)
1 x Mini PCI Socket
Hardware Monitor Chip Integrated in W83627HG
Operation Temp. -20oC ~ +70oC (-4oF ~ 158oF)
Watchdog Timer 255-level Reset
Dimension (L x W) 146 x 102 mm ( 5.7 ” x 4.0 ” )

Index
Table of Contents
Chapter 1 Introduction ...........................................................1
1.1 Copyright Notice.................................................................. 2
1.2 Aboutthis User's Manual.......................................................2
1.3 Warning ...............................................................................2
1.4 Replacing thelithium battery .................................................3
1.5 Technical Support ................................................................ 3
1.6 Warranty ............................................................................. 4
1.7 Packing list.......................................................................... 5
1.8 Cable Kit............................................................................. 5
1.9 Ordering Information.......................................................... 6
1.10 Specification ......................................................................7
1.11 Board dimensions .............................................................. 8
Chapter 2 Installation ............................................................ 9
2.1 Board layout ........................................................................ 10
2.2 Jumpers andConnectors ...................................................... 11
Chapter 3 BIOS ...................................................................... 25
3.1 BIOS Introduction ................................................................ 26
3.2 BIOS Setup ......................................................................... 26
3.3 Standard CMOS Features ..................................................... 27
3.4 Advanced BIOS Features ..................................................... 29
3.5 Advanced Chipset Features .................................................. 33
3.6 Integrated Peripherals ..........................................................36
3.8 PNP/PCI Configurations ....................................................... 45
3.9 PC Health Status ................................................................. 46
3.10 Frequency/Voltage Control ................................................. 47
3.12 Set Password .....................................................................48
3.13 Save & Exit Setup ...............................................................49
3.14 Exit Without Saving ............................................................ 49
3.15 BIOS memory map ............................................................. 50
3.16 Award BIOS Post Codes ......................................................50
Chapter 4 Appendix ............................................................... 56
4.1 I/O Map ............................................................................... 57
4.2 IRQ Map ..............................................................................58
4.3 Example of Watch Dog codes ................................................ 58
3.7 Power Management Setup ................................................... 42
3.11 Load Optimized Defaults ..................................................... 47
Introduction
1.10 Board Dimensions
Unit:mm
Layout Top View
28.24 32.87
115.11 17.15
101.25
46.99
108.14
30.11.6
16.86.5
3.38 95.2
101.96
8.84133.93
146
30.48 45.98
41.27
1.2
67.2
3.35
83.36
97.97
?3.1
?6.35
7.32 90
1
2
1
1
1
NO COMPONENT

Index
Table of Contents
Chapter 1 Introduction ...........................................................1
1.1 Copyright Notice.................................................................. 2
1.2 Aboutthis User's Manual.......................................................2
1.3 Warning ...............................................................................2
1.4 Replacing thelithium battery .................................................3
1.5 Technical Support ................................................................ 3
1.6 Warranty ............................................................................. 4
1.7 Packing list.......................................................................... 5
1.8 Cable Kit............................................................................. 5
1.9 Ordering Information.......................................................... 6
1.10 Specification ......................................................................7
1.11 Board dimensions .............................................................. 8
Chapter 2 Installation ............................................................ 9
2.1 Board layout ........................................................................ 10
2.2 Jumpers andConnectors ...................................................... 11
Chapter 3 BIOS ...................................................................... 25
3.1 BIOS Introduction ................................................................ 26
3.2 BIOS Setup ......................................................................... 26
3.3 Standard CMOS Features ..................................................... 27
3.4 Advanced BIOS Features ..................................................... 29
3.5 Advanced Chipset Features .................................................. 33
3.6 Integrated Peripherals ..........................................................36
3.8 PNP/PCI Configurations ....................................................... 45
3.9 PC Health Status ................................................................. 46
3.10 Frequency/Voltage Control ................................................. 47
3.12 Set Password .....................................................................48
3.13 Save & Exit Setup ...............................................................49
3.14 Exit Without Saving ............................................................ 49
3.15 BIOS memory map ............................................................. 50
3.16 Award BIOS Post Codes ......................................................50
Chapter 4 Appendix ............................................................... 56
4.1 I/O Map ............................................................................... 57
4.2 IRQ Map ..............................................................................58
4.3 Example of Watch Dog codes ................................................ 58
3.7 Power Management Setup ................................................... 42
3.11 Load Optimized Defaults ..................................................... 47
Introduction
Unit:mm
Layout Bottom View
28.24 32.87
115.11 17.15
101.25
46.99
108.14
30.11.6
16.86.5
3.38 95.2
101.96
8.84133.93
146
30.48 45.98
41.27
1.2
67.2
3.35
83.36
97.97
?3.1
?6.35
7.32 90
1
2
1
1
1
NO COMPONENT

Index
Table of Contents
Chapter 1 Introduction ...........................................................1
1.1 Copyright Notice.................................................................. 2
1.2 Aboutthis User's Manual.......................................................2
1.3 Warning ...............................................................................2
1.4 Replacing thelithium battery .................................................3
1.5 Technical Support ................................................................ 3
1.6 Warranty ............................................................................. 4
1.7 Packing list.......................................................................... 5
1.8 Cable Kit............................................................................. 5
1.9 Ordering Information.......................................................... 6
1.10 Specification ......................................................................7
1.11 Board dimensions .............................................................. 8
Chapter 2 Installation ............................................................ 9
2.1 Board layout ........................................................................ 10
2.2 Jumpers andConnectors ...................................................... 11
Chapter 3 BIOS ...................................................................... 25
3.1 BIOS Introduction ................................................................ 26
3.2 BIOS Setup ......................................................................... 26
3.3 Standard CMOS Features ..................................................... 27
3.4 Advanced BIOS Features ..................................................... 29
3.5 Advanced Chipset Features .................................................. 33
3.6 Integrated Peripherals ..........................................................36
3.8 PNP/PCI Configurations ....................................................... 45
3.9 PC Health Status ................................................................. 46
3.10 Frequency/Voltage Control ................................................. 47
3.12 Set Password .....................................................................48
3.13 Save & Exit Setup ...............................................................49
3.14 Exit Without Saving ............................................................ 49
3.15 BIOS memory map ............................................................. 50
3.16 Award BIOS Post Codes ......................................................50
Chapter 4 Appendix ............................................................... 56
4.1 I/O Map ............................................................................... 57
4.2 IRQ Map ..............................................................................58
4.3 Example of Watch Dog codes ................................................ 58
3.7 Power Management Setup ................................................... 42
3.11 Load Optimized Defaults ..................................................... 47
Introduction
1.11 Installing the CPU
The processor socket comes with a screw to secure the CPU. As showing in
the picture as bellow, loose the screw rst before inserting the CPU.
Place the CPU into the socket by making sure the notch on the corner of the
CPU corresponding with the notch on the inside of the socket. Once the CPU
has slide into the socket, lock the screw.
Make sure that heat sink of the CPU top surface is in complete contact to
avoid the CPU overheating problem.
If not, it would cause your system or CPU to be hanged, unstable, damaged.

Index
Table of Contents
Chapter 1 Introduction ...........................................................1
1.1 Copyright Notice.................................................................. 2
1.2 Aboutthis User's Manual.......................................................2
1.3 Warning ...............................................................................2
1.4 Replacing thelithium battery .................................................3
1.5 Technical Support ................................................................ 3
1.6 Warranty ............................................................................. 4
1.7 Packing list.......................................................................... 5
1.8 Cable Kit............................................................................. 5
1.9 Ordering Information.......................................................... 6
1.10 Specification ......................................................................7
1.11 Board dimensions .............................................................. 8
Chapter 2 Installation ............................................................ 9
2.1 Board layout ........................................................................ 10
2.2 Jumpers andConnectors ...................................................... 11
Chapter 3 BIOS ...................................................................... 25
3.1 BIOS Introduction ................................................................ 26
3.2 BIOS Setup ......................................................................... 26
3.3 Standard CMOS Features ..................................................... 27
3.4 Advanced BIOS Features ..................................................... 29
3.5 Advanced Chipset Features .................................................. 33
3.6 Integrated Peripherals ..........................................................36
3.8 PNP/PCI Configurations ....................................................... 45
3.9 PC Health Status ................................................................. 46
3.10 Frequency/Voltage Control ................................................. 47
3.12 Set Password .....................................................................48
3.13 Save & Exit Setup ...............................................................49
3.14 Exit Without Saving ............................................................ 49
3.15 BIOS memory map ............................................................. 50
3.16 Award BIOS Post Codes ......................................................50
Chapter 4 Appendix ............................................................... 56
4.1 I/O Map ............................................................................... 57
4.2 IRQ Map ..............................................................................58
4.3 Example of Watch Dog codes ................................................ 58
3.7 Power Management Setup ................................................... 42
3.11 Load Optimized Defaults ..................................................... 47
Introduction
1.12 Installing the Memory
To install the Memory module, locate the Memory SO-DIMM slot on the
board and perform as below:
Adjust the socket polarizing key and the board key to the same direction.
Insert the board obliquely. Moreover, lay the board in parallel to the
opening at angle of 20oto 30o, and softly insert the board so as to hit the
socket bottom. Stopping insertion halfway will result in improper insertion.
Applying the board side notch in parallel to the socket bottom so that the
board position cannot be displaced, press the board side notch up, and
x it to the latch portion at both socket edges. Press the board side notch,
and release the notch with a snap “click” tone, if the printed board exceeds
the latch claw head.
1.
2.
3.
Side notch
Key
Latch knob
Latch claw Latch section
Latch arm
Polarizing key
1
2
3
Procedures for board extraction
Apply the thumb nail to the latch knob at both socket edges. Forcibly widen
the latch knobs to right and left ways, and release the latch. Then draw the
board out along an angle where the board is raised.

Index
Table of Contents
Chapter 1 Introduction ...........................................................1
1.1 Copyright Notice.................................................................. 2
1.2 Aboutthis User's Manual.......................................................2
1.3 Warning ...............................................................................2
1.4 Replacing thelithium battery .................................................3
1.5 Technical Support ................................................................ 3
1.6 Warranty ............................................................................. 4
1.7 Packing list.......................................................................... 5
1.8 Cable Kit............................................................................. 5
1.9 Ordering Information.......................................................... 6
1.10 Specification ......................................................................7
1.11 Board dimensions .............................................................. 8
Chapter 2 Installation ............................................................ 9
2.1 Board layout ........................................................................ 10
2.2 Jumpers andConnectors ...................................................... 11
Chapter 3 BIOS ...................................................................... 25
3.1 BIOS Introduction ................................................................ 26
3.2 BIOS Setup ......................................................................... 26
3.3 Standard CMOS Features ..................................................... 27
3.4 Advanced BIOS Features ..................................................... 29
3.5 Advanced Chipset Features .................................................. 33
3.6 Integrated Peripherals ..........................................................36
3.8 PNP/PCI Configurations ....................................................... 45
3.9 PC Health Status ................................................................. 46
3.10 Frequency/Voltage Control ................................................. 47
3.12 Set Password .....................................................................48
3.13 Save & Exit Setup ...............................................................49
3.14 Exit Without Saving ............................................................ 49
3.15 BIOS memory map ............................................................. 50
3.16 Award BIOS Post Codes ......................................................50
Chapter 4 Appendix ............................................................... 56
4.1 I/O Map ............................................................................... 57
4.2 IRQ Map ..............................................................................58
4.3 Example of Watch Dog codes ................................................ 58
3.7 Power Management Setup ................................................... 42
3.11 Load Optimized Defaults ..................................................... 47
Introduction
Put the heatsink on 3308170
, and screw it on in the direction of
the board. Insert four screws (No. 1) downward into the holes and turn
them tightly.
Verify the direction is correct (No. 2) and plug the FAN connector into
CPUF1 connector.
1.
2.
1.13 Heatsink Installation
FAN Connector
1
1
1
1
2

Index
Table of Contents
Chapter 1 Introduction ...........................................................1
1.1 Copyright Notice.................................................................. 2
1.2 Aboutthis User's Manual.......................................................2
1.3 Warning ...............................................................................2
1.4 Replacing thelithium battery .................................................3
1.5 Technical Support ................................................................ 3
1.6 Warranty ............................................................................. 4
1.7 Packing list.......................................................................... 5
1.8 Cable Kit............................................................................. 5
1.9 Ordering Information.......................................................... 6
1.10 Specification ......................................................................7
1.11 Board dimensions .............................................................. 8
Chapter 2 Installation ............................................................ 9
2.1 Board layout ........................................................................ 10
2.2 Jumpers andConnectors ...................................................... 11
Chapter 3 BIOS ...................................................................... 25
3.1 BIOS Introduction ................................................................ 26
3.2 BIOS Setup ......................................................................... 26
3.3 Standard CMOS Features ..................................................... 27
3.4 Advanced BIOS Features ..................................................... 29
3.5 Advanced Chipset Features .................................................. 33
3.6 Integrated Peripherals ..........................................................36
3.8 PNP/PCI Configurations ....................................................... 45
3.9 PC Health Status ................................................................. 46
3.10 Frequency/Voltage Control ................................................. 47
3.12 Set Password .....................................................................48
3.13 Save & Exit Setup ...............................................................49
3.14 Exit Without Saving ............................................................ 49
3.15 BIOS memory map ............................................................. 50
3.16 Award BIOS Post Codes ......................................................50
Chapter 4 Appendix ............................................................... 56
4.1 I/O Map ............................................................................... 57
4.2 IRQ Map ..............................................................................58
4.3 Example of Watch Dog codes ................................................ 58
3.7 Power Management Setup ................................................... 42
3.11 Load Optimized Defaults ..................................................... 47
Introduction
1.14 Heatsink Dimensions
90
66
20
20
20
20
40
14.5
43.7
10
15.75
12.5
7°
17.9
18.3
25
30.25
9.5

Index
Table of Contents
Chapter 1 Introduction ...........................................................1
1.1 Copyright Notice.................................................................. 2
1.2 Aboutthis User's Manual.......................................................2
1.3 Warning ...............................................................................2
1.4 Replacing thelithium battery .................................................3
1.5 Technical Support ................................................................ 3
1.6 Warranty ............................................................................. 4
1.7 Packing list.......................................................................... 5
1.8 Cable Kit............................................................................. 5
1.9 Ordering Information.......................................................... 6
1.10 Specification ......................................................................7
1.11 Board dimensions .............................................................. 8
Chapter 2 Installation ............................................................ 9
2.1 Board layout ........................................................................ 10
2.2 Jumpers andConnectors ...................................................... 11
Chapter 3 BIOS ...................................................................... 25
3.1 BIOS Introduction ................................................................ 26
3.2 BIOS Setup ......................................................................... 26
3.3 Standard CMOS Features ..................................................... 27
3.4 Advanced BIOS Features ..................................................... 29
3.5 Advanced Chipset Features .................................................. 33
3.6 Integrated Peripherals ..........................................................36
3.8 PNP/PCI Configurations ....................................................... 45
3.9 PC Health Status ................................................................. 46
3.10 Frequency/Voltage Control ................................................. 47
3.12 Set Password .....................................................................48
3.13 Save & Exit Setup ...............................................................49
3.14 Exit Without Saving ............................................................ 49
3.15 BIOS memory map ............................................................. 50
3.16 Award BIOS Post Codes ......................................................50
Chapter 4 Appendix ............................................................... 56
4.1 I/O Map ............................................................................... 57
4.2 IRQ Map ..............................................................................58
4.3 Example of Watch Dog codes ................................................ 58
3.7 Power Management Setup ................................................... 42
3.11 Load Optimized Defaults ..................................................... 47
Installation
Chapter 2
Installation
Chapter 2 - Installation

Index
Table of Contents
Chapter 1 Introduction ...........................................................1
1.1 Copyright Notice.................................................................. 2
1.2 Aboutthis User's Manual.......................................................2
1.3 Warning ...............................................................................2
1.4 Replacing thelithium battery .................................................3
1.5 Technical Support ................................................................ 3
1.6 Warranty ............................................................................. 4
1.7 Packing list.......................................................................... 5
1.8 Cable Kit............................................................................. 5
1.9 Ordering Information.......................................................... 6
1.10 Specification ......................................................................7
1.11 Board dimensions .............................................................. 8
Chapter 2 Installation ............................................................ 9
2.1 Board layout ........................................................................ 10
2.2 Jumpers andConnectors ...................................................... 11
Chapter 3 BIOS ...................................................................... 25
3.1 BIOS Introduction ................................................................ 26
3.2 BIOS Setup ......................................................................... 26
3.3 Standard CMOS Features ..................................................... 27
3.4 Advanced BIOS Features ..................................................... 29
3.5 Advanced Chipset Features .................................................. 33
3.6 Integrated Peripherals ..........................................................36
3.8 PNP/PCI Configurations ....................................................... 45
3.9 PC Health Status ................................................................. 46
3.10 Frequency/Voltage Control ................................................. 47
3.12 Set Password .....................................................................48
3.13 Save & Exit Setup ...............................................................49
3.14 Exit Without Saving ............................................................ 49
3.15 BIOS memory map ............................................................. 50
3.16 Award BIOS Post Codes ......................................................50
Chapter 4 Appendix ............................................................... 56
4.1 I/O Map ............................................................................... 57
4.2 IRQ Map ..............................................................................58
4.3 Example of Watch Dog codes ................................................ 58
3.7 Power Management Setup ................................................... 42
3.11 Load Optimized Defaults ..................................................... 47
Installation
2.1 Block Diagram
Analog
R.G.B.
VGA
LVDS
Intel®
GME965
Intel® CPU
1 x Mini PCI
2 x PCIe LAN
Controller
Fast LAN
(RJ-45)
FSB
533/800MHz
533/667MHz
DMI
USB I/F
Serial ATA I/F
IDE ATA I/F
Intel®
ICH8M
DIO
1 x IDE
6 x USB
2 x SATA
Line-in/out
Mic-in
Memory Bus
Super IO
COM1
COM2
LPT1/
FDD IrDA
KB
MS
Codec
HD
1 x CF II
LVDS
LPC I/F
1 x 200pin DDRII
SO-DIMM socket
PCI Bus
PCIe Bus
Fast LAN
(PH 2x5)

Index
Table of Contents
Chapter 1 Introduction ...........................................................1
1.1 Copyright Notice.................................................................. 2
1.2 Aboutthis User's Manual.......................................................2
1.3 Warning ...............................................................................2
1.4 Replacing thelithium battery .................................................3
1.5 Technical Support ................................................................ 3
1.6 Warranty ............................................................................. 4
1.7 Packing list.......................................................................... 5
1.8 Cable Kit............................................................................. 5
1.9 Ordering Information.......................................................... 6
1.10 Specification ......................................................................7
1.11 Board dimensions .............................................................. 8
Chapter 2 Installation ............................................................ 9
2.1 Board layout ........................................................................ 10
2.2 Jumpers andConnectors ...................................................... 11
Chapter 3 BIOS ...................................................................... 25
3.1 BIOS Introduction ................................................................ 26
3.2 BIOS Setup ......................................................................... 26
3.3 Standard CMOS Features ..................................................... 27
3.4 Advanced BIOS Features ..................................................... 29
3.5 Advanced Chipset Features .................................................. 33
3.6 Integrated Peripherals ..........................................................36
3.8 PNP/PCI Configurations ....................................................... 45
3.9 PC Health Status ................................................................. 46
3.10 Frequency/Voltage Control ................................................. 47
3.12 Set Password .....................................................................48
3.13 Save & Exit Setup ...............................................................49
3.14 Exit Without Saving ............................................................ 49
3.15 BIOS memory map ............................................................. 50
3.16 Award BIOS Post Codes ......................................................50
Chapter 4 Appendix ............................................................... 56
4.1 I/O Map ............................................................................... 57
4.2 IRQ Map ..............................................................................58
4.3 Example of Watch Dog codes ................................................ 58
3.7 Power Management Setup ................................................... 42
3.11 Load Optimized Defaults ..................................................... 47
Installation
2.2 Jumpers and Connectors
25
50 26
1
200
199
2
1
40
42
3941
CFD1
200pin DDR II SO-DIMM Socket
12
9
99
10
12
12
44
43
2
1
19
20 2
1
1
1
1
6
5
2
1
2
1
109
2
1123
124
10
9
2
1
29 30
21
10
9
109
21
1
3
1
510
16
1
1
1
LVDS1
IR1 JPWR1
ATX1
COM2 VGA1 RES1 KBM1 LAN2 USB3
AUDIO1
MINIPCI1
USB2
USB1
LAN1
INV1
JRS1
COM1 JFRT1
CON1
LLED1
SATA2
SATA1
LPT1
IDE1
1
JBAT1
1
1
1
1
21
JP3
JP2
JVLCD1
JP1
JSMB1
DIO1
23
1
4 5
11
67
8910
12
13
14
CPUF1
15
17
21
22
18
20
23 24
26
25
27
28 29
30 31 32 33
16
34
19

Index
Table of Contents
Chapter 1 Introduction ...........................................................1
1.1 Copyright Notice.................................................................. 2
1.2 Aboutthis User's Manual.......................................................2
1.3 Warning ...............................................................................2
1.4 Replacing thelithium battery .................................................3
1.5 Technical Support ................................................................ 3
1.6 Warranty ............................................................................. 4
1.7 Packing list.......................................................................... 5
1.8 Cable Kit............................................................................. 5
1.9 Ordering Information.......................................................... 6
1.10 Specification ......................................................................7
1.11 Board dimensions .............................................................. 8
Chapter 2 Installation ............................................................ 9
2.1 Board layout ........................................................................ 10
2.2 Jumpers andConnectors ...................................................... 11
Chapter 3 BIOS ...................................................................... 25
3.1 BIOS Introduction ................................................................ 26
3.2 BIOS Setup ......................................................................... 26
3.3 Standard CMOS Features ..................................................... 27
3.4 Advanced BIOS Features ..................................................... 29
3.5 Advanced Chipset Features .................................................. 33
3.6 Integrated Peripherals ..........................................................36
3.8 PNP/PCI Configurations ....................................................... 45
3.9 PC Health Status ................................................................. 46
3.10 Frequency/Voltage Control ................................................. 47
3.12 Set Password .....................................................................48
3.13 Save & Exit Setup ...............................................................49
3.14 Exit Without Saving ............................................................ 49
3.15 BIOS memory map ............................................................. 50
3.16 Award BIOS Post Codes ......................................................50
Chapter 4 Appendix ............................................................... 56
4.1 I/O Map ............................................................................... 57
4.2 IRQ Map ..............................................................................58
4.3 Example of Watch Dog codes ................................................ 58
3.7 Power Management Setup ................................................... 42
3.11 Load Optimized Defaults ..................................................... 47
Installation
Jumpers
JP1, JP3: COM Port Power Special Support (8), (21)
Connector type: 2.54mm pitch 1x3 pin header.
Pin Voltage
1-2 Standard Signal for
Pin-9 (default)
23 1
2-3 +12V
23 1
Pin 1-2 Mode
Short AT Mode
1 2
Open ATX Mode
(Default)
1 2
JPWR1: AT/ATX Power Mode (14)
Connector type: 2.54mm pitch 1x2 pin header.
JRS1: COM2 RS-232/422/485 Mode Select (12)
The onboard COM2 port can be congured to operate in RS-422 or RS-485
modes. RS-422 modes differ in the way RX/TX is being handled. Jumper
JRS1 switches between RS-232 or RS-422/485 mode. When JRS1 is set
to RS-422 or RS-485 mode, there will be only +12V output let while JRS1 is
set. All RS-232/422/482 modes are available on COM2.
It can be congured COM2 to operate in RS-232, RS-422 or RS-485 mode
Connector type: 2.00mm pitch 2x3 pin header.
Mode RS-232
(Default) RS-422 RS-485
1-2 Short Open Open
3-4 Open Short Open
5-6 Open Open Short
65
2
1
65
2
1
65
2
1

Index
Table of Contents
Chapter 1 Introduction ...........................................................1
1.1 Copyright Notice.................................................................. 2
1.2 Aboutthis User's Manual.......................................................2
1.3 Warning ...............................................................................2
1.4 Replacing thelithium battery .................................................3
1.5 Technical Support ................................................................ 3
1.6 Warranty ............................................................................. 4
1.7 Packing list.......................................................................... 5
1.8 Cable Kit............................................................................. 5
1.9 Ordering Information.......................................................... 6
1.10 Specification ......................................................................7
1.11 Board dimensions .............................................................. 8
Chapter 2 Installation ............................................................ 9
2.1 Board layout ........................................................................ 10
2.2 Jumpers andConnectors ...................................................... 11
Chapter 3 BIOS ...................................................................... 25
3.1 BIOS Introduction ................................................................ 26
3.2 BIOS Setup ......................................................................... 26
3.3 Standard CMOS Features ..................................................... 27
3.4 Advanced BIOS Features ..................................................... 29
3.5 Advanced Chipset Features .................................................. 33
3.6 Integrated Peripherals ..........................................................36
3.8 PNP/PCI Configurations ....................................................... 45
3.9 PC Health Status ................................................................. 46
3.10 Frequency/Voltage Control ................................................. 47
3.12 Set Password .....................................................................48
3.13 Save & Exit Setup ...............................................................49
3.14 Exit Without Saving ............................................................ 49
3.15 BIOS memory map ............................................................. 50
3.16 Award BIOS Post Codes ......................................................50
Chapter 4 Appendix ............................................................... 56
4.1 I/O Map ............................................................................... 57
4.2 IRQ Map ..............................................................................58
4.3 Example of Watch Dog codes ................................................ 58
3.7 Power Management Setup ................................................... 42
3.11 Load Optimized Defaults ..................................................... 47
Installation
JVLCD1: LCD Panel Voltage Select (16)
The voltage of LCD panel could be selected by JVLCD1 in +5V or +3.3V.
Connector type: 2.54 mm pitch 1x3 pin header
Pin Voltage
1-2 +5V
23 1
2-3 +3.3V (Default)
23 1
JP2: Compact Flash Select (17)
Connector type: 2.54mm pitch 1x2 pin header.
Pin 1-2 Function Select
Short Master
1 2
Open Slave (Default)
1 2

Index
Table of Contents
Chapter 1 Introduction ...........................................................1
1.1 Copyright Notice.................................................................. 2
1.2 Aboutthis User's Manual.......................................................2
1.3 Warning ...............................................................................2
1.4 Replacing thelithium battery .................................................3
1.5 Technical Support ................................................................ 3
1.6 Warranty ............................................................................. 4
1.7 Packing list.......................................................................... 5
1.8 Cable Kit............................................................................. 5
1.9 Ordering Information.......................................................... 6
1.10 Specification ......................................................................7
1.11 Board dimensions .............................................................. 8
Chapter 2 Installation ............................................................ 9
2.1 Board layout ........................................................................ 10
2.2 Jumpers andConnectors ...................................................... 11
Chapter 3 BIOS ...................................................................... 25
3.1 BIOS Introduction ................................................................ 26
3.2 BIOS Setup ......................................................................... 26
3.3 Standard CMOS Features ..................................................... 27
3.4 Advanced BIOS Features ..................................................... 29
3.5 Advanced Chipset Features .................................................. 33
3.6 Integrated Peripherals ..........................................................36
3.8 PNP/PCI Configurations ....................................................... 45
3.9 PC Health Status ................................................................. 46
3.10 Frequency/Voltage Control ................................................. 47
3.12 Set Password .....................................................................48
3.13 Save & Exit Setup ...............................................................49
3.14 Exit Without Saving ............................................................ 49
3.15 BIOS memory map ............................................................. 50
3.16 Award BIOS Post Codes ......................................................50
Chapter 4 Appendix ............................................................... 56
4.1 I/O Map ............................................................................... 57
4.2 IRQ Map ..............................................................................58
4.3 Example of Watch Dog codes ................................................ 58
3.7 Power Management Setup ................................................... 42
3.11 Load Optimized Defaults ..................................................... 47
Installation
JBAT1: Clear CMOS Setup (27)
If the board refuses to boot due to inappropriate CMOS settings here is how
to proceed to clear (reset) the CMOS to its default values.
Connector type: 2.54mm pitch 1x3 pin header
Pin Mode
1-2 Keep CMOS (Default)
23 1
2-3 Clear CMOS
23 1
You may need to clear the CMOS if your system cannot boot up because
you forgot your password, the CPU clock setup is incorrect, or the CMOS
settings need to be reset to default values after the system BIOS has been
updated.
Refer to the following solutions to reset your CMOS setting:
Solution A:
1. Power off the system and disconnect the power cable.
2. Place a shunt to short pin 1 and pin 2 of JBAT1 for ve seconds.
3. Place the shunt back to pin 2 and pin 3 of JBAT1.
4. Power on the system.
Solution B:
If the CPU Clock setup is incorrect, you may not be able to boot up. In this
case, follow these instructions:
Turn the system off, then on again. The CPU will automatically boot up
using standard parameters.
As the system boots, enter BIOS and set up the CPU clock.
Note:
If you are unable to enter BIOS setup, turn the system on and off a few
times.
1.
2.

Index
Table of Contents
Chapter 1 Introduction ...........................................................1
1.1 Copyright Notice.................................................................. 2
1.2 Aboutthis User's Manual.......................................................2
1.3 Warning ...............................................................................2
1.4 Replacing thelithium battery .................................................3
1.5 Technical Support ................................................................ 3
1.6 Warranty ............................................................................. 4
1.7 Packing list.......................................................................... 5
1.8 Cable Kit............................................................................. 5
1.9 Ordering Information.......................................................... 6
1.10 Specification ......................................................................7
1.11 Board dimensions .............................................................. 8
Chapter 2 Installation ............................................................ 9
2.1 Board layout ........................................................................ 10
2.2 Jumpers andConnectors ...................................................... 11
Chapter 3 BIOS ...................................................................... 25
3.1 BIOS Introduction ................................................................ 26
3.2 BIOS Setup ......................................................................... 26
3.3 Standard CMOS Features ..................................................... 27
3.4 Advanced BIOS Features ..................................................... 29
3.5 Advanced Chipset Features .................................................. 33
3.6 Integrated Peripherals ..........................................................36
3.8 PNP/PCI Configurations ....................................................... 45
3.9 PC Health Status ................................................................. 46
3.10 Frequency/Voltage Control ................................................. 47
3.12 Set Password .....................................................................48
3.13 Save & Exit Setup ...............................................................49
3.14 Exit Without Saving ............................................................ 49
3.15 BIOS memory map ............................................................. 50
3.16 Award BIOS Post Codes ......................................................50
Chapter 4 Appendix ............................................................... 56
4.1 I/O Map ............................................................................... 57
4.2 IRQ Map ..............................................................................58
4.3 Example of Watch Dog codes ................................................ 58
3.7 Power Management Setup ................................................... 42
3.11 Load Optimized Defaults ..................................................... 47
Installation
Connectors
IDE1: IDE Connector (1)
An IDE drive ribbon cable has two connectors to support two IDE devices. If
a ribbon cable connects to two IDE drives at the same time, one of them has
to be congured as Master and the other has to be congured as Slave by
setting the drive select jumpers on the drive.
Consult the documentation that came with your IDE drive for details on
jumper locations and settings. You must orient the cable connector so that
the pin 1 (color) edge of the cable corresponds to pin 1 of the IDE connector.
Connector type: 2.00mm pitch 2x22 pin header
Pin Description Pin Description
4443
21
1 IDE RESET 2 GND
3 DATA7 4 DATA8
5 DATA6 6 DATA9
7DATA5 8 DATA10
9 DATA4 10 DATA11
11 DATA3 12 DATA12
13 DATA2 14 DATA13
15 DATA1 16 DATA14
17 DATA0 18 DATA15
19 GND 20 N/C (Key)
21 REQ 22 GND
23 IO WRITE 24 GND
25 IO READ 26 GND
27 IO READY 28 IDSEL
29 DACK 30 GND
31 IRQ14 32 N/C
33 ADAD1 34 ATA66 DETECT
35 ADAD0 36 ADAD2
37 CS#1 38 CS#3
39 IDEACTP 40 GND
41 +5V 42 +5V
43 GND 44 N/C

Index
Table of Contents
Chapter 1 Introduction ...........................................................1
1.1 Copyright Notice.................................................................. 2
1.2 Aboutthis User's Manual.......................................................2
1.3 Warning ...............................................................................2
1.4 Replacing thelithium battery .................................................3
1.5 Technical Support ................................................................ 3
1.6 Warranty ............................................................................. 4
1.7 Packing list.......................................................................... 5
1.8 Cable Kit............................................................................. 5
1.9 Ordering Information.......................................................... 6
1.10 Specification ......................................................................7
1.11 Board dimensions .............................................................. 8
Chapter 2 Installation ............................................................ 9
2.1 Board layout ........................................................................ 10
2.2 Jumpers andConnectors ...................................................... 11
Chapter 3 BIOS ...................................................................... 25
3.1 BIOS Introduction ................................................................ 26
3.2 BIOS Setup ......................................................................... 26
3.3 Standard CMOS Features ..................................................... 27
3.4 Advanced BIOS Features ..................................................... 29
3.5 Advanced Chipset Features .................................................. 33
3.6 Integrated Peripherals ..........................................................36
3.8 PNP/PCI Configurations ....................................................... 45
3.9 PC Health Status ................................................................. 46
3.10 Frequency/Voltage Control ................................................. 47
3.12 Set Password .....................................................................48
3.13 Save & Exit Setup ...............................................................49
3.14 Exit Without Saving ............................................................ 49
3.15 BIOS memory map ............................................................. 50
3.16 Award BIOS Post Codes ......................................................50
Chapter 4 Appendix ............................................................... 56
4.1 I/O Map ............................................................................... 57
4.2 IRQ Map ..............................................................................58
4.3 Example of Watch Dog codes ................................................ 58
3.7 Power Management Setup ................................................... 42
3.11 Load Optimized Defaults ..................................................... 47
Installation
LVDS1: LVDS LCD Connector (2)
The LVDS connector supports 24-bit or 48-bit LVDS.
VDD could be selected by JVLCD1 in +5V or +3.3V.
Connector type: DF-13-30DP-1.25V
Pin Description Pin Description
2 VDD 1 VDD
4 TX2CLK+ 3 TX1CLK+
6 TX2CLK- 5 TX1CLK-
8 GND 7 GND
10 TX2D0+ 9 TX1D0+
12 TX2D0- 11 TX1D0-
14 GND 13 GND
16 TX2D1+ 15 TX1D1+
18 TX2D1- 17 TX1D1-
20 GND 19 GND
22 TX2D2+ 21 TX1D2+
24 TX2D2- 23 TX1D2-
26 GND 25 GND
28 TX2D3+ 27 TX1D3+
30 TX2D3- 29 TX1D3-
1
2930
2
IR1: Infrared Connector (3)
Connector type: 2.54mm pitch 1x5 pin header
Pin Voltage
1
2
3
4
5
1 +5V
2 N/C
3 IRRX
4 GND
5 IRTX
The IR connector can be congured to support wireless infrared module,
user can transfer les to or from notebooks, PDA and printers.
Install infrared module onto IrDA connector and enable infrared function from
BIOS setup and make sure to have correct orientation when you plug onto
IrDA connector.

Index
Table of Contents
Chapter 1 Introduction ...........................................................1
1.1 Copyright Notice.................................................................. 2
1.2 Aboutthis User's Manual.......................................................2
1.3 Warning ...............................................................................2
1.4 Replacing thelithium battery .................................................3
1.5 Technical Support ................................................................ 3
1.6 Warranty ............................................................................. 4
1.7 Packing list.......................................................................... 5
1.8 Cable Kit............................................................................. 5
1.9 Ordering Information.......................................................... 6
1.10 Specification ......................................................................7
1.11 Board dimensions .............................................................. 8
Chapter 2 Installation ............................................................ 9
2.1 Board layout ........................................................................ 10
2.2 Jumpers andConnectors ...................................................... 11
Chapter 3 BIOS ...................................................................... 25
3.1 BIOS Introduction ................................................................ 26
3.2 BIOS Setup ......................................................................... 26
3.3 Standard CMOS Features ..................................................... 27
3.4 Advanced BIOS Features ..................................................... 29
3.5 Advanced Chipset Features .................................................. 33
3.6 Integrated Peripherals ..........................................................36
3.8 PNP/PCI Configurations ....................................................... 45
3.9 PC Health Status ................................................................. 46
3.10 Frequency/Voltage Control ................................................. 47
3.12 Set Password .....................................................................48
3.13 Save & Exit Setup ...............................................................49
3.14 Exit Without Saving ............................................................ 49
3.15 BIOS memory map ............................................................. 50
3.16 Award BIOS Post Codes ......................................................50
Chapter 4 Appendix ............................................................... 56
4.1 I/O Map ............................................................................... 57
4.2 IRQ Map ..............................................................................58
4.3 Example of Watch Dog codes ................................................ 58
3.7 Power Management Setup ................................................... 42
3.11 Load Optimized Defaults ..................................................... 47
Installation
SATA1, 2: Serial ATA Connectors (4), (5)
The CPU board on board supports two SATA II connectors, second
generation SATA drives transfer data at speeds as high as 300MB/s, twice
the transfer speed of rst generation SATA drives. The SATA drives can be
congured in a RAID 0, RAID 1 or RAID 10 conguration.
Pin Description
1
7
1 GND
2 TX+
3 TX-
4 GND
5 RX-
6 RX+
7 GND
CON1: RS-422/ 485 Output Connector (6)
Connector type: 2.00mm pitch 1x4 box wafer connector
Pin RS-422 RS-485
1
3
2
4
1 TX+ DATA+
2 TX- DATA-
3 RX+ N/C
4 RX- N/C
LLED1: LAN1 LED Indicator (7)
Connector type: 2.54mm pitch 2x2 pin header
Pin Description Pin Description
1 LAN_Y- 2 LAN_Y+
3 LAN_G- 4 LAN_G+
1 2
3 4