Global American Inc. 2801112 User manual

Industrial Embedded Motherboard
2801112 Quick Reference
Embedded Eden Platform
With Low Power Eden/C3 CPU
VGA, LAN, Audio, TV-out
Compact Mini-ITX Form Factor
Specifications
Form Factor
Mini-Flex ATX / Mini-ITX Motherboard, 170 x 170 mm (W x L)
CPU Onboard embedded VIA Eden 533 MHz CPU at 133 MHz FSB
Optional VIA Eden 667/400 and EBGA C3 800 MHz CPU
Memory Two 168-pin DIMM slots support up to 1 GB PC133 SDRAM
Chipset VIA 8601A and 8231with 266 Mbytes/Sec. of V-link
Real Time Clock VIA 8231 integrated RTC with onboard lithium battery
Power Management ACPI 1.0 compliant, supports power saving mode with ATX PSU
Expansive Slot 1 x PCI expansive slot
PCI Enhanced IDE Dual UltraATA/100 IDE channels up to 4 ATAPI devices
VGA Interface VIA 8601A chipset built-in Trident Blade 3D SVGA controller
3D/2D engine with 8 MB video memory
Integrated TV-out interface with AV/S-video output
LAN Interface VIA 8231 chipset built-in Fast Ethernet MAC with VIA 6103 PHY
10Base-T/100Base-TX auto-switching, IEEE802.3U compliant
Audio Interface AC97 3D audio interface with line-in, line-out, CD-in, Mic-in
Multiple I/O Port PS/2 keyboard and mouse, parallel and IrDA ports
4 x USB ports (two external and two internal USB ports)
1 x RS-232C serial ports
External I/O Port PS/2 keyboard and mouse
DB25 female LPT port, DB15 female VGA, AV-out, S-video out
RJ45 LAN, dual USB
DB9 male COM1, Audio Line-in/out
Power Requirement Standard ATX power supply
Board Dimension 170 x 170 mm or 6.7 x 6.7 inches
Operation Temperature 0 ~ 60
O
C (32 ~ 140
O
F)
2801112 Quick Reference

Industrial Embedded Motherboard
Jumper and Connector Location
(16)
(15)
(7)
(14)
(9)
(18)
(19)
(4)
(17)
(13)
(1)
(12)
(11)
(8)
(10)
(3)
(6)
(5)
(2)
1.
VIA Eden or EBGA C3 CPU
2. ATX Power Connector
3. DIMM Sockets (DIMM1-2)
4. PCI Expansion Slot
5. IDE Connector (IDE1)
6. IDE Connector (IDE2)
7. RTC Battery
8. Flash BIOS
9. Clear CMOS (J10)
10.
Host Frequency (FSB) (J13)
11.
Front Panel Connector
12.FIR Module Connector (J5)
13.Video in Connector (J12)
14.Wake up on Modem (J8)
15.CD ROM Line-in (J7)
16.S/P DIF Output/RCA Video Output Select (J11)
17.FAN Connector (FAN1/FAN2)
18.USB Port 3/4 Connector (J9)
19.
CIR Module Connector (J6)
2801112 Quick Reference

Industrial Embedded Motherboard
Jumpers and Connectors
Jumpers
J10
J11
J4
J13
Connectors
1-2
Normal
Mode
2-3 Clear CMOS
1-2 RCA Video Output
3-4 S/P DIF Output
1-2 Disabled DOC BIOS
2-3 Enabled DOC BIOS
5-6,7-8 66Mhz
3-4,7-8 100Mhz
1-2,3-4 133Mhz
FAN1
CPU FAN Connector:
This 3-pin header is
used for connecting a CPU
chipset fan.
FAN2 System Fan Connector: This 3-pin header is for connecting the case
fan that keeps the system cool.
J7 CD ROM Line-in Connector: This 4-pin header is used for connecting
the CD ROM audio input to the sound card.
J8 Wake up on Modem connector: This 3-pin header is used for female
wake up of the computer through a network card.
J5 FIR Module Connector: This 5-pin header is used for connecting a FIR
port for use of FIR device.
J12 Video in Connector: This 16-pin header is used for connecting a video
port for use of video devices.
J6 CIR Module Connector: This 10-pin header is use for connecting a
CIR device.
J9 USB port 3&4 Connector: This 10-pin header is used for connecting a
CIR device.
CN2 COM Port Connector: RS-232 serial port on bracket
CN3 USB 1/2 Connector and RJ45 Connector
CN4 RCA Video or S/P DIF Jack
CN5 S-Video Jack
2801112 Quick Reference

Industrial Embedded Motherboard
I/O Ports
PS/2
Mouse Parallel
Port LAN
Port COM
Port
PS/2
Keyboard VGA
Port S-Video
out USB
Ports Line
Out/Line
in/Mic
in
RCA
Video
or
S/P
DIF
Front Panel Connector
(SPKR)
SPEAKER
Speaker Out
Ground
1 2
LED anode
LED cathode
(IDELED)
HDDLED
EPMI
Ground
+5V
LED anode
LED cathode
(GLED)
Green LED
POWER LED
LED anode
Non
Reset Single
Ground
(RST)
RESET
BUTTON
KEYLOCK
LED cathode
Keyboard
Ground
21 22
Power on/off
Ground
(PW ON)
POWER
SWITCH
2801112 Quick Reference