Global Industrial 316111 User manual

Mobile Plan Center Model no. 316111
Assembly Instructions
Part Decription Qty
1 Upper tube assembly 2
2 Upper end tube assembly 2
3 End caps 8
4 Lower tube assembly 2
5 Lower end tube assembly 2
6 Locking caster 2
7 Knob screw 10
8 Non-locking caster 2
9 Wrench 1
1. Insert lower end tube assemblies (part 5)
with caster weld nuts facing down into low-
er tube assemblies (part 4). Adjust to size of
clamp being used and fasten four knob screw
(part 7) into lower tube assembly.
x10
1

2. Screw casters (part 6 and part 8) into lower
end tube assembly and tighten with wrench
(Part 9).
3. Insert upper end tube assemblies (part 2) into
upper tube assemblies (part 1). Adjust to size of
clamp being used. Fasten four knob screws (part
7) into upper tube assembly (part 1).
4. Slide upper frames into lower frames. Adjust
to size of clamp being used and fasten two knob
screws (part 7) into lower tube assembly.
2