Global Sources BC56 User manual

bluetooth Car Charger BC56 Manual
Thank you for purchasing our bluetooth car
charger! In order to have a best performance
experience, please read the manual carefully before
use!
I. Product introduction
This product is a car-specific car bluetooth
player, built-in advanced bluetooth and WMA.MP3,
WAV, FLAC decoder chip, can play music files inside
U disk, wirelessly transmitted to car audio, no need to
modify your car can easily Make your music enjoy
while driving. More important is the purity and clarity
of the special sound of DSP technology. We hope to
bring you unlimited enjoyment of the music.
II. Schematic Appearance
Description：
1. MIC
2. LED display window
3. Short press : Previous song/ long press to
enter FM mode
4. Long press 2s to shut down/ short press for
mode switch
5. Short press: Next song/ long press to enter
FM mode
6. Play/pause/answer/redail/long press to
activiate the SIRI assistant
7. Adhensive zone
8. TF card slot
9. USB jack
10. 2.4A output
11. QC3.0 output
12. Cigar connector
13. Adhensive pad
III. Features
1. Support all types of vehicles
2. LED display
3. Support QC3.0 fast charge output
4. Support QC3.0 protocol /USB Power Delivery
QC 3.0 protocol /Quick Charge 3.0/2.0 protocol
/Huawei FCP/SCP protocol / Samsung AFC
protocol /USB BC1.2 DCP /Support Apple 2.4A
charging specification
5. Support stereo FM transmission technology
6. Support TF card music player
7. Support WMA, MP3, WAV, FLAC music
format files
8. Automatic power off memory function
9. bluetooth supports A2DP, AVRCP, HFP, HSP
10. bluetooth V5.0
11. bluetooth hands-free calling
12. Support DSP technology
13. Battery voltage detection
14. Short press any key to light up after the fake
power off
VI. Operation instructions
4.1.1 Insert the machine into the cigarette lighter
of the car. After power supply, the product will
automatically enter the power-on state. LED display:
HI---battery voltage---bluetooth--FM frequency.
4.1.2 Turn on your car FM radio, and adjust the
frequency of product same as your car radio, then
your can enjoy music from your car stereo.
4.1.3 Adjust the FM frequency:
Long press the /button to enter the FM state.
When the LED display frequency flashes, long press
to fast adjust FM; short press for slow frequency
modulation from 87.5~108MHZ . Three seconds do
not operate to exit the frequency selection.
1. Please open bluetooth on your mobile phone and
search for the device “BC56” from phone menu list.
2. Choose the device “BC56”
3. Choose “BC56” in menu of phone and select the
connection as "hands-free device" in the authorized
device.
Matching connection for additional devices
At boot time, the bluetooth car hands free will only
automatically start connecting to the matching device
that was connected last time.
Note: Some phones can be automatically connected
when the bluetooth car is powered on again. Some
phones may need to grant permission for each
connection. You can set it to “Automatically connect."
For more information, please refer to the phone's user
manual.
4.2 Use bluetooth hands-free calling
(When your bluetooth hands free is idle or playing
music)
4.2.1 Dial number
In the connected state, the phone number is directly
dialed out by the mobile phone, and the sound is
automatically sent from the car audio speaker.
4.2.2 Answer the phone
In the connected state, when a call is made, press "
"directly to answer the call. In the answering
state, press the button or the button to switch
between bluetooth and the hands-free phone. Press
the “ ” button again to hang up the phone.

4.2.3 Reject the call
When a call comes in and you don't want to answer it,
long press to reject the call.
4.3 Redial the call
When bluetooth connected, double press “ ”to
redial the last call
4.4 Play the music stored in the mobile phone
This product supports A2DP function which can play
the music stored in the mobile phone by transmit
music to the car audio through the bluetooth hands-
free FM so as to restore the higher quality music
effect.
4.5 Mobile Music / TF / U Disk Song Mode
Long press“ ”to enter mode switch: BT-- --USB-- --
TF
After connecting the bluetooth of the mobile phone,
select the song to play or insert TF/U disk to
automatically read and play music.
4.6 Siri Voice Assistant
When bluetooth connected, Long Press “ ” for 3
seconds to activate siri/ voice assistant.( Phone which
support this function: APPLE,Samsung and phone
with android systerm ) Note: Some phones do not
support this function.
4.7 Switch function:
Press and hold the “M” button for two seconds to
shutdown; short press any button to boot
Tip: Turn off the digital screen, bluetooth, and the
button light only. Reserved charging function.
VI. Tech Specs
Rated working voltage
12V-24V
Limit working voltage
10~26V
PD output
18W
Working Temp
0~50℃
Music format support
MP3 / WMA / WAV/
FLAC
SNR
>60dB
Battery voltage display
accuracy
±1V
USB1
5V/3A 9V/2A
12V/1.5A
USB2
5V/2.4A
bluetooth Ver
Version 5.0
bluetooth audio
processing
DSP and
A2DP(Advance
Audio Distribution
Profile)
bluetooth transmission
distance
<10M
MIC effective distance
0.5~2M
FM Freq
87.5~108Mhz
FM transmission mode
Stereo digital PLL
lock frequency
VII. Warm tips
1. Do not turn the radio volume too high (usually
18 or below) to avoid the increase of the sound
back noise.
2. Although the transmission power of this
product is relatively strong, better to skip the
Frequency with strong signal in local to get a
better sound quality
3.Do not use this product in a dusty and humid
environment with extremely high and low
temperatures.
4. Do not drop the product to avoid surface
damage or breakdown.
5. Do not disassemble the product,if you have
any questions, please contact your dealer.
6. If the absorbent cotton is not firmly fixed, the
product can be removed. Wipe the dust on the
surface of the absorbent cotton with a non-
woven fabric.
7. Due to continuous improvement and
enhancement of technology,changes in product
performance and functionality are subject to
change without notice.
VIII. Troubleshooting
Power is
not
responding
or not
displayed
1. Check if the machine is in good
contact with the cigarette port, and
the cigarette holder is not
seriously rusted.
2. Unplug and re-try again
3. Check if the cigarette holder is
powered normally
Can't play
1. Check if the USB device is
connected to the player or not, or
you can try another USB device.
2. Please make sure that there is
copy of the file in the USB device
that can be supported by the
product.
3. Please make sure the volume is
not set to 0
There is
noise but
no sound
1. Whether the product player is in
a pause state
2. Is the volume adjusted to 0 or
small?
The audio
of car can't
receive
sound
1. Make sure that the product FM
launch has been turned on.
2. Is the transmission frequency of
the product the same as the
reception frequency of car’s?
The
launching
effect is
not good,
there is
noise
1. Make sure that there is no
strong signal station at the
frequency of the current
transmission. When using it,
adjust to the frequency of no radio
station to get better sound effect.
IX. Packaging
1. Main device 2. User Manual