Globalmediapro SP009P User manual

Surge Protector
User Manual

Item No.：SP009P
HD-TVI/AHD/HDCVI/CVBS POC (Power over Coax) Surge
Protector
1

Introduction
SP009P is a surge protector designed to protect HD-TVI, AHD, HDCVI, CVBS, and PoC (Power over Coaxial)
device from high voltage spikes without compromising the performance of network bandwidth and
power transfer.
Features
●Supports HD-TVI, AHD, HDCVI, CVBS, and PoC devices.
●Supports PoC (Power over Coaxial).
●Resolution up to 8MP (4K).
●Max surge current up to 25KA.
●Network bandwidth up to 100Mbps at 450M.
●Response time less than 1 microsecond.
●Compliant with IEC 61000-4-5.
Diagram
Connect a HD Camera (Must connect to the earth ground)
Connect a PoC Device (Must connect to the earth ground)
2

Panel View
No
Interface
Function
1
Equipment End
To connect a video source.
2
Cable End
To connect a coaxial cable.
3
Ground Wire
To connect the ground.
Caution
1. We recommend using a RG-coaxial cable, such as RG59/ RG6U.
2. To effectively protect your device, please ensure to connect the ground wire to the earth ground
(Impedance < 100Ω).
3

3. Do NOT connect the ground wire to an electrical wire.
4. We recommend using SP009P with IP09CP (PoE over coaxial extender).
※IP09CP has built-in ESD protection, you can use it with SP009P to improve the protection.
※SP009P might shorten the transmission distance by up to 50M.
4

Specification
Item No.
SP009P
Support
Compliant
IEC 61000-4-5
PoC
Bandwidth
0 to 1000Mhz
Response Time
< 1us
Insertion Loss
0.8db@42 MHz
Max. Discharge Current
25kA (8/20 us)
Maximum Operating Voltage
58V
Ports & Interfaces
Input (Equipment End)
1 x BNC (Male)
Output (Cable End)
1 x BNC (Female)
Ground
1 x Fork-type cable lug
Ambient Temperature
Operation
-40 to 90℃
Storage
-40 to 90℃
Humidity
Up to 95%
Operating Altitude (Max)
2000M
Physical Characteristics
Mounting
Rack-Mount / Wall-Mount
Dimension
112.65 x 25.4 x 25.4mm
Weight
85g
5