Glow Dreaming Glow Travel Sleep Easy User manual

Glow Travel Sleep Easy
User Manual
Glow Travel Sleep Easy
User Manual

Glow Travel Sleep Easy
User Manual
Button Indication
Type-c port
Overview
As pictured above:
Product component list (supplied in loose)
1x Glow Travel Sleep Easy unit
1x Type-c cable
5x Scent nebuliser pads
Battery level indication
Red light
Sound control
Aroma control
Timer

Glow Travel Sleep Easy
User Manual
WARNING This Glow Travel Sleep Easy is compliant with all relevant standards
regarding electromagnetic elds and is, when handled as described in the
User’s Guide, safe to use. Therefore, always read the instructions in this User’s
Guide carefully before using the device.
Adult assembly is required. Keep small parts away from children when
assembling. • This product is not a toy. Do not allow children to play with
it. • This Glow Travel Sleep Easy is not a substitute for responsible adult
supervision. • Keep this User’s Guide for future reference. • Keep the cords out
of reach of children. • Do not cover the Glow Travel Sleep Easy with a towel
or blanket. • Test this Glow Travel Sleep Easy and all its functions so that you
are familiar with it prior to actual use. • Do not use the Glow Travel Sleep Easy
in damp areas or close to water. • Do not install the Glow Travel Sleep Easy in
extreme cold or heat, direct sunlight, or close to a heat source. • Only use the
power cord provided. Do not use other power cords as this may damage the
device. • Do not touch the plug contacts with sharp or metal objects. • Connect
the power adapters to easily accessible electrical sockets.
IMPORTANT:
RETAIN FOR FUTURE REFERENCE, READ CAREFULLY

Glow Travel Sleep Easy
User Manual
Product Description and Function
The Glow Travel Sleep Easy is a portable Sleep Device that combines Red LED
Light Therapy, Pink Noise and a waterless Scent Nebuliser, enabling you to
take your sleep routine with you anywhere you go. The unit is fully portable,
rechargeable, and ts inside a cup holder so when you’re on the move your baby
can still sleep soundly.
Getting started
1. Unwrap all components. Remove USB cable.
2. Fully charge the Glow Travel Sleep Easy before the rst use. Connect the
USB cable to the port on the back of the unit. Then plug the power cord into a
USB charger port with the power turned o, and lastly turn on the power to start
the charging (USB charger port not included).
a. The power indicator lights up red when charging and turns
green to indicate that the product is fully charged.
b. The battery level is also displayed when not charging, with a
red light when the battery level is below 20%, orange when the battery level is
between 20% and 80%, and green when the battery level is between 80% and
100%.
3. Add a Scent Nebulizer pad to the inner compartment and add the
recommended drops of essential oil for your child’s age.
a. Seek medical advice before using any aromatherapy. If using
Glow Dreaming oils, add essential oil according to your child’s age group, as
outlined in the manual. Please do not exceed the recommended
dosage.
b. The Glow Travel Sleep Easy is not a humidier and so you

Glow Travel Sleep Easy
User Manual
4. Twist the lid back into place. Always t the lid before you turn the unit on.
5. Press the Power button on the back of the Glow Travel Sleep Easy to turn it
on. The Power Indicator light will turn on to show you are ready to get started.
6. Tap the LED Light button to turn the Red LED Light on to the dimmest set-
ting. Tap again to increase the brightness to the medium or brightest setting:
there are 3 brightness settings. To turn the Red Light o, simply tap the LED
Light button 4 times – allow 2-3 seconds between each tap.
7. Tap the Volume button to turn on the Pink Noise to the lowest setting. Tap
again to increase the volume to the medium or loudest setting. To turn the Pink
Noise o, simply tap the Volume button 4 times – allow 2-3 seconds between
each tap.
8. Tap the Timer button to turn on the Scent Nebuliser to the 2-hour timer.
Tap the button again to extend the timer to 4 hours and tap a third time to let
the Scent Nebuliser run for 12 hours.
a. When using the 2- or 4-hour timer, the entire unit will turn o
after the timer is nished.
b. When using the 12hr setting, only the Scent Nebuliser will turn
o: the light and/or noise will remain on until you turn them o yourself.
c. Regardless of if the unit is fully charged it will switch o after
12 hours, even if plugged in on the cable. This is a safety measure to protect
the battery.
9. To turn on the Button Lock, press the Power button on the back of the unit
once – the Lock light on the front of the unit will turn on. When the Button Lock
is on, you will not be able to use the touchpads to change the settings – this
prevents the Glow Travel Sleep Easy settings from changing if the unit is jostled
Getting started

Glow Travel Sleep Easy
User Manual
1. If you do not enable the Scent Nebuliser or Timer function, the Pink Noise
and/or Red LED Light will run continuously until the unit hits 12 hours of
continuous run time, is manually turned o or the unit runs out of power.
2. The Pink Noise speaker is in the base of the unit, so for the best sound
output the Glow Travel Sleep Easy should be positioned on a at, hard
surface. Soft furnishings like fabric and carpet will dull the sound.
3. The Scent Nebuliser is not a humidier or vapouriser: do not use any
water inside the Glow Travel Sleep Easy.
4. The Scent Nebuliser pads can be used for up to approx 3 mnths, depend-
ing on how often the scent pad is used.
5. Use only recommended 100% natural essential oils in this product. Oils
that contain additional chemicals, spices or other impurities will cause
the unit to malfunction. Before changing to a dierent essential oil,
always clean the unit as recommended in the maintenance instructions.
6. If the Lock light is on, then the Button Lock has been activated: press the
Power button on the back of the unit to disable the Lock and enable the
touchpads.
7. Disconnect the charger once it is fully charged to start using the Glow
Travel Sleep Easy, if running low on charge the the Glow Travel Sleep
Easy can be used when plugged in if needed.
Important Notes:
prevents the Glow Travel Sleep Easy settings from changing if the unit is jostled
while in use. Press the Power button on the back of the unit once more to turn
o the Lock and enable the touchpads.

Glow Travel Sleep Easy
User Manual
- The Glow Travel Sleep Easy has been designed to be safe for your family
and can be used from birth and during pregnancy.
Protect your Glow Travel Sleep Easy in the following ways:
- Do not attempt to disassemble the product or carry out your own repairs.
If the product is damaged or not functioning correctly, please Contact Us.
- Do not cut, twist or stretch the power cord. Do not place heavy objects on
the power cord. Keep the cord away from high temperatures and never attempt
to repair a cord that isn’t working.
- If the adapter cord or any socket appears damaged or loose, do not use
the product and please Contact Us.
- If you notice an unusual smell or noise, please stop using the product.
Clean the product thoroughly as per the Maintenance instructions and Contact
Us if the issue persists.
- The Glow Travel Sleep Easy does not use any water. Do not attempt to put
water or any liquid into the Scent Nebuliser Oil Pad cavity. Never place the
adapter in water or allow water to enter the Scent Nebuliser, the power outlet
or air return.
- Empty out and wipe the Scent Nebuliser Oil Pad cavity and lid after each
use and always use a new Oil Pad for each use.
- Essential oils may cause staining on the unit, this is not considered unsafe
or damage.
Precaution and Safety Warnings

Glow Travel Sleep Easy
User Manual
To ensure your Glow Travel Sleep Easy functions safely:
- Ensure the Glow Travel Sleep Easy is fully charged between uses.
- Use only one Scent Nebuliser Pad at a time. Look to replace the pad every
3mths or every time you use a dierent oil to ensure they don’t mix.
- Clean regularly to prevent malfunction (see Maintenance).
- Always unplug from the power supply before maintenance.
- Essential oils can stain and so spills should be wiped up promptly.
- Do not use it in direct sunlight, near a heat source or in the draft of a
cooling system.
- Always keep on a hard, stable, at surface: do not use on soft surfaces
such as carpet, fabric or rattan.
- Do not place on top of electric appliances such as TVs or audio equip-
ment.
- Do not use it for more than 12 hours at any one time: always turn o your
Glow Travel Sleep Easy between uses.
- Allow at least 60 minutes between uses to avoid damaging the unit.
- Do not touch the unit with wet hands.
- Keep out of reach of children and pets. Do not allow children to operate or
play with the unit.
- Ensure the power cord doesn’t cause any obstruction or trip hazard.
Best practice

Glow Travel Sleep Easy
User Manual
Maintenance
To get the best from your Glow Travel Sleep Easy, we recommend you wipe
out the Scent Nebuliser Oil Pad cavity with a clean, dry microber cloth after
each use of the Scent Nebuliser. Each pad is good for up to 3mths and can be
replaced when dirty. Please do not use inferior pads as it may release more oil
than desired.
We recommend cleaning the Glow Travel Sleep Easy thoroughly before and
after each use, to ensure dust doesn’t build up in between uses:
- Turn o the power at the back of the Glow Travel Sleep Easy.
- Twist o the lid and wipe out the Scent Nebuliser cavity and the inside of
the lid with a soft, dry microber cloth. If any residue from the Scent Nebuliser
Oil Pad remains after use, dispose of this.
- Wipe down the outside of the entire Glow Travel Sleep Easy with a soft,
dry microber cloth to remove any residue or dust. Dampen a cloth with plain
water or white vinegar to remove sticky or stubborn grime.
- Check the speaker on the underside of the unit to ensure there is no dust
building up: gently blow on the speaker to dislodge dust.
Do not use acid-based detergents, solvents, or abrasives: these will damage
the unit and may cause it to emit harmful gases.

Glow Travel Sleep Easy
User Manual
Troubleshooting
Symptom Possible cause Solution
Glow Travel
Sleep Easy will
not turn on
1. Battery has run out of
charge.
2. Dust in the power outlet.
• Remove power cord completely.
• Blow gently on power outlet and wall socket to dislodge dust.
• Reconnect the power and try again to recharge the battery.
Pink Noise is
too quiet
Glow Travel Sleep Easy is
sitting on a soft or unstable
surface
• Place Glow Travel Sleep Easy on a hard, at surface such
as wood or metal. Soft fabrics, rattan and carpet will all dull
the volume.
Buttons not
responding
Button Lock is activated. • The Lock Light should be activated on the unit.
• Push the Power button on the back of the Glow Travel Sleep
Easy to turn the Lock o.
Contact Us if you need any help with your Glow Sleep Easy: customercare@glowdreaming.com
We always appreciate a short video showing us the issue you are having with your
Glow Travel Sleep Easy– please capture:
• the unit is showing a green battery light, indicating it is fully charged.
• The power is turned on.
• the issue you are experiencing.
- Please allow 2-3 seconds between each tap on the touchpads, as the
buttons are sensitive.
Contact Us

Glow Travel Sleep Easy
User Manual
This product has been produced with the greatest care for normal, household use. Following
directions carefully will ensure dependable operation. If you experience unsatisfactory
operation or are dissatised with your Glow Travel Sleep easy (Barcode 9360046000138) please
contact our Customer Care team via customercare@glowdreaming.com Modication to the
product by the consumer or failure to follow the manufacturer’s operating instructions will void
the warranty. If repair is required under the warranty period, the product should be returned
with proof of purchase. The purchaser assumes responsibility for the proper care and use of the
product in accordance with the printed Operating Manual. The purchaser or user must make his
or her judgment as to when to use the product and the length of use. Keep the Operating Manual
available as it is your guide to safe, ecient operation. Our goods come with guarantees that
cannot be excluded under the Australian Consumer Law 2011. You are entitled to a replacement
of the faulty unit or refund for a major failure. For warranty claims please Contact Us. If you
experience an issue outside the warranty period, you are invited to Contact Us and we will
support you to the best of our ability.
Specications (model no 9360046000138)
Size: 70mm x 140mm
Unit weight: 190g (excl. Power supply)
Input Power: DC5V 1A
Battery Model/Capacity: 18650 lithium battery-2600 mAh
Main material: ABS and Polypropylene
LED Colour: Red
Brightness: 3 levels
Volume: 3 levels. Max 70Db
Speaker: 28mm, 4Ω1.5W
Use time: 12 hours approximately
Timer: 2hr, 4hr, on (will run until water tank is mostly empty)
Warranty

Glow Travel Sleep Easy
User Manual
Warranty
• This product is guaranteed for 12 months after the date of purchase. Please retain your original
receipt as proof of purchase.
• If you receive this Glow Travel Sleep Easy as a gift, please Contact Us to register for your warranty as
soon as possible.
• We will be unable to support any warranty claims if we are unable to conrm the purchase
information and eligibility.
• The warranty is available to the rst user of the product only and is non-transferrable.
• Any fault or damage that occurs during normal usage as described in this manual is covered by this
warranty.
• All warranty claims are subject to proper use and care in accordance with the product manual. This
includes a proper cleaning regimen to maintain the device.
• The warranty will not apply in the event of neglect, intentional or accidental damage, or normal wear
and tear.
• If there is evidence of tampering, willful or accidental damage, misuse, or incorrect product use, your
warranty will be voided.
• If you experience a warranty issue within the warranty period, please Contact Us for support.
• If we are unable to resolve the issue for you, we will replace eligible items within the warranty period.
• You will be asked to supply a video of the issue you are experiencing so that we can conrm the issue.
• This Warranty is not transferable and does not cover product purchased, serviced, or used outside
Australia, New Zealand and the United Kingdom. The warranty does not extend to the elimination of
externally generated static, noise, or loss of range or audio/video quality due to external factors, to
costs incurred for the installation, removal, or reinstallation of the product, or to damage to digital
media devices or memory. The warranty does not apply to any product or part thereof which, in the
opinion of the company, has suered or been damaged through alteration, improper installation,
mishandling, misuse, neglect, accident or exposure to moisture.
• This warranty does not apply to damage caused by an AC adapter not provided with the product or
by removal or defacement of factory serial number/barcode labels.
This manual suits for next models
1
Table of contents