Go groove SoundCLUTCH User manual

INSTRUCTION MANUAL
TM
SOUND
CLUTCH

12
Product Diagram
What’s in the box?
Thank you for purchasing the GOgroove™ SoundCLUTCH™ headphones.
These headphones are designed to provide the perfect blend of style, quality
and comfort. Fitted with sleek alloy accents, an adjustable headband, in-line
volume control and a 6 foot audio cable, these headphones feel just as good
as they sound.
a -GOgroove SoundCLUTCH Headphones
(1) 3.5mm audio cable
(2) In-line volume control
(3) Adjustable headband
(4) Headphone speakers
a
3
4

Connecting your audio device
Locate the (1) 3.5mm audio cable and insert it into your audio device’s headphone
port.
Adjusting volume
You can adjust volume on both your audio device and the (2) In-line volume
control. To adjust the volume on the (2) In-line volume control, simply slide the dial
with your nger until the sound is adequate. It is best to turn up the volume of
your audio device rst so that you can fully control the sound using the (2) In-line
volume control.
Adjusting the headband
To optimize your comfort, please use the (3) Adjustable headband. Slide the left
and right (4) Headphone speakers upwards or downwards until each side is at
your preferred position. Typically, sliding the (4) Headphone speakers downwards
provides a looser t, while sliding them upwards provides a tighter t. The soft
ear cushions on the (4) Headphone speakers provide comfort and a means of
sound isolation.
Collapsing for storage
Please slide the (4) Headphone speakers
upwards until they are at their shortest
length. Apply gentle pressure to the
(4) Headphone speakers so that they meet
the (3) Adjustable headband.
The (1) 3.5mm audio cable can then be
wrapped around the (3) Adjustable headband
for storage.
Operating Instructions:
- Keep in a safe place free from dust, liquid, and extreme temperatures.
- Don’t attempt to take apart the product.
- Try to avoid dropping on the oor or hitting against hard surfaces.
- Don’t use chemicals to clean the product.
Cautions

There is no sound coming from the headphones.
- Please make sure that you have adjusted the volume on the (2) In-line volume
control. Also, please check the volume on your audio device to make sure it is
outputting sound.
-Please make sure that the (1) 3.5mm audio cable is fully inserted into your audio
device. Sometimes a case or protective cover can prevent a good connection.
The headphones are not tting comfortably.
- Please modify the (3) Adjustable headband by sliding the (4) Headphone speakers
downwards or upwards until the t is comfortable.
Troubleshooting
©2011 ACCESSORY POWER
All trademarks and brand names are the property of their owners
Product Specications
Driver Unit: 40 mm power drivers
1kHz Sensitivity: 108 dB
Impedance: 32 Ohms
Frequency range: 20Hz -20kHz
Plug: standard 3.5mm stereo
Cable length: 6 feet