Go Power GP-DURALITE-100E User manual

GP-DURALITE-100-E
Portable Solar Kit
Quick Start Guide
Find tech tips, manuals and support at gpelectric.com
No.
Description No. Description
1 Cloth Backing
4
2 Wiring Connector
Carrying Handles
3 Easy Fold Legs
4
3
1
2
The Expansion kit is highly
recommended to be used
with the Go Power!
Portable Power Pack.
Warnings
Panel Specications
SPECIFICATIONS
Solar Cell Type Monocrystalline
Output Power 100W
Rated Current
5.06A
Open Circuit Voltage
Short Circuit Voltage
21.1 x 23.6 x 1in; 535 x 600 x 25 mm
21.1 x 47.2 x 1.0 in; 535 x 1200 x 25 mm
8.4 lbs; 3.8 kg
Dimensions (closed)
Dimensions (open)
Weight
Warranty 2 year - panel
Disconnect all power
sources
Electricity can be very dangerous. Take appropriate caution when
making connections.
Observe all safety precautions of the battery manufacturer when
handling or working around batteries. When charging, batteries
produce hydrogen gas, which is highly explosive. Ensure batteries
are in a well-ventilated space, away from sparks for open flames.
Ensure all connections are tight and secure. Loose connections
may generate sparks and heat. Be sure to check all connections
before using the portable solar kit.
Reverse polarity of the battery terminals and array will cause the
controller to give a warning tone. The controller will not function
unless battery terminals are connected to a battery with proper
polarity. Failure to correct this fault could damage the controller.
Refer to manual for details.
Battery and wiring safety
Wiring connections
Observe correct polarity
23.3V
5.45A
This kit IS NOT
weatherproof
Never leave your Duralite Solar Kit unattended, plugged in
overnight, or subject to inclement weather.
Do not exceed the Charge
Controller current and
voltage ratings
Included in kit:
• 100 watt Kit
• Expansion Harnesses:
• 8mm Barrel Connector Harness
• MC4 Connector Harness

Setup Expansion Wiring
Best Used with:
1. Locate a sunlit area, free from overhanging branches or obstructions.
2. Remove solar panel kit from carrying case.
3. Fold the two panels outward and extend the two support legs.
4. Connect the applicable wiring harness to the “DC OUT” port and
connect the other end to the compatible solar power station, solar on the
side port or as an expansion to a base kit using the included splitter cable.
Do not connect directly to a battery
5. Place solar panel facing the sun.
Avoid any shading no matter how small. An object as
small as a broomstick held across the solar module may
cause the power output to be reduced. Overcast days may
also cut the power output of the module.
To obtain maximum output it is suggested that the
panel’s direction be frequently adjusted to track the sun’s
movement throughout the day (southerly exposure).
NOTE
NOTE
- This kit is ideal for use with Portable Power Stations
- This kit requires a solar regulator for use with Solar on the Side installations.
- Base kit includes standard PSK battery harnesses
- This “Expansion Kit” includes:
- 8mm DC barrel connector harness
- MC4 connector harness
NOTE