GOAL ZERO QUICK CLIP User manual
The pronged end fits securely through the side
slots on GOAL ZERO BOULDER solar panels.
1. Be sure to ACTIVATE YOUR WARRANTY at www.GOALZERO.com/warranty
2. Line up BOULDER solar panels so that the holes are even.
3. Insert the QUICK CLIP through both panels and twist.
How to Use Your Gear
TWIST IT
The green lever turns a full 360⁰
so you can lock panels in place
and get to them easily.
CONNECT IT
Getting Started
Get to Know Your Gear
Insert
Align panel QUICK-CLIP holes. Insert pronged end. Push all the
way down so the base is rested against panel. Make sure lever is
perpendicular to panels.
Secure
Twist lever 45° in either direction.
Lock
Flip lever completely over and lock into position. You will feel it
become secure.
Technical Specs
Length 2.5 in
Dimensions 4x.75x1 in (10.16x1.9x2.5 cm)
Warranty 12 months
General
QuickClip
SOLAR PANEL CONNECTOR
QuickClip
SOLAR PANEL CONNECTOR
Output Ports
What solar panels will the QUICK CLIPS work with?
QUICK CLIPS are meant for use with any GOAL ZERO BOULDER solar panel.
Can I chain different types of BOULDER panels together with the QUICK CLIPS?
No. The length separating the bracket holes on GOAL ZERO BOULDER panels varies based on
stability and structure, so BOULDER 30s can only be connected to BOULDER 30s, and
BOULDER 15s can only be connected to BOULDER 15s.
How many QUICK CLIPS do I need to hold two panels together?
QUICK CLIPS are strong, but they are not invincible. You should use at least 2 per side for the
best structural integrity.
GOAL ZERO products:
BOULDER 15 solar panel
BOULDER 30 solar panel
CONTACT US:
Toll Free: 888.794.6250
14864 Pony Express Road
Bluffdale, UT, 84065
WWW.GOALZERO.COM
We proudly support Tifie Humanitarian
WWW.TIFIE.ORG
USER GUIDE
Frequently Asked Questions
Compatible With
• Fill out your warranty
• Watch demo video
• Download this manual
