Questions you may have...
Q- How much will the SHERPA power?
A- Your SHERPA 120 contains a 120 watt hour battery
which means it would power a 50 watt light bulb for 2.5
hour or a 25 watt light bulb for 4.5 hours.
Q- How long does it take to charge the SHERPA?
A-From the wall it will take 2.5 to 3 hours. From GOALØ
solar gear refer to the TruWatt reference guide for general
guidelines.
Q- Is my SHERPA waterproof?
A-It is weather resistant. If your SHERPA does get wet,
allow it to dry completely before you use it.
Q- Does the SHERPA have “battery” memory?
A-No. Older battery technologies used to suffer from
memory problems. The SHERPA’s technology is smart and
prevents memory challenges of old.
Q- Will my SHERPA “burn-out” if plugged in too long?
A-Keeping the SHERPA plugged in actually improves the
life of the SHERPA. Just like your body-staying active
improves its health.
Q- What do I do if it looks like the SHERPA won’t charge?
A-After 30 hrs of none use, the SHERPA will automatically
go to sleep to conserve power and shut the power
monitor’s LCD screen off. After 100 hours of non-use the
SHERPA will hibernate. In both instances, when you next
use the SHERPA it may appear that stored power is close
to empty. In both cases simply plug the SHERPA into its
accessory wall charger for a minimum of 15 minutes to
wake it up.
