GODEER MF289753 User manual

TWIN OVER FULL L-SHAPED BUNK & LOFT BED
ASSEMBLY INSTRUCTIONS
ITEM MF289753
PAGE 1 OF 9

TWIN OVER FULL L-SHAPED BUNK & LOFT BED
ASSEMBLY INSTRUCTIONS
ITEM MF 289753
PAGE 2 OF 9
SAFETY WARNINGS AND GENERAL NOTES：
1. Follow the information on the warnings on the bunk bed end
structure and on the carton. Do not remove the warning label from the
bed.
2. Always use the recommended size mattress on mattress support, or
both, to help prevent the likelihood of entrapment or falls.
3. Do not allow children under 6 years of age to use the upper bunk.
4. Periodically check and ensure the guardrail, ladder and other
components are in their proper position, free from damage, and all
connectors are tight.
5. Do not allow horseplay on or under beds.
6. Always prohibit jumping on the bed.
7. Prohibit more than one person on upper bunk.
8. Always use the ladder for entering and leaving the upper bunk.
9. Do not use substitute parts.Contact the manufacturer or dealer for
replacement parts.
10. Use of a night-tight may provide added safely precaution for a
child using the upper bunk.
11. Always use guardrails on both long sides of the upper bunk.
12. If the bunk bed will be placed next to a wall, the guardrail that runs
the full length of the bed should be placed against the wall to prevent
entrapment between the bed and the wall.
The use of water or sleep flotation mattresses is prohibited.
13. STRANGULATION HAZARD-Never attach or hang items to any
part of the bunk bed that are not
designed for use with the bed.
14. Keep these instructions for future reference.
15. We recommend assembling your bunk bed on the shipping carton
to protect your floor or carpet.
16. Be certain all staples are out of the box before beginning assembly
on the shipping carton.
17. USE ONLY MATTRESSES WHICH ARE AS THE TABLE
BELOW ON UPPER AND ON LOWER BUNKS.
Down bed
Bed type Length Width Thickness
Full Standard 75" 54" 8"
Up bed (bunk bed and tribed included)
Bed type Length Width Thickness
Twin Standard 74" – 75" 38 ½" 6"
18. SURFACE OF MATTRESS MUST BE AT LEAST 5" (127MM)
BELOW THE UPPER EDGE OF GUARDRAILS.
19. Replacement Parts:
Replacement Parts, including additional guardrails, may be obtained
from any of our (GIGACLOUD TECHNOLOGY(USA) INC.) dealers

M6*60mm
22PCS
2PCS
1PC
1Post 2Post 3Post 4Post
1PC 1PC 1PC
2PCS
5End guard rail
2PCS
6Side rail
2PCS
7Ladder
2PCS
8Side rail
2PCS
Side rail 12
34PCS
9Lower slats
8PCS
Lower slats
10 11
4PCS
Upper slats
13
2PCS
Guard rail
14
18PCS
16
17
1PC
Side rail
2PCS
Side rail
CBolts
M8*60mm
16PCS
ABolts
M6*40mm
8PCS
DBolts
HUniversal wheel
2PCS
IUniversal wheel JAllenkey KSpanner
4X59mm
1PC 1PC
PAGE 3 OF 9
Upper slats
15
1PC
Side rail
BBolts
M6*12mm
8PCS
M4*16mm
4PCS
FBolts
18
2PCS
Cloth belt
∅18
16PCS
GSpacer
M6*20mm
24PCS
EBolts
LAllenkey
5X59mm
1PC

16
12
13
17
15
17
13
13
13
12
12
12
1
2
3
4
6
7
5
8
9
10
10
10
10
9
9
11
11
14
14
12
12
12
12
13
13
13
13
12
5
6
7
9
9
12
PAGE 4 OF 9
8
18
18

C x8
M6*60mm
C
C
C
C
7
80%
J
C
C
B
B
C
B
B
C
C
C
C
J
C
STEP1
STEP2
2
4
5
6
1
35
6
C
C
C
C
7
STEP1
PAGE 5 OF 9
B x4
M6*12mm
80%
C x8
M6*60mm

D x8
M6*40mm
80%
I x2
H x2
100%
J
STEP9
STEP10
PAGE 9 OF 9
DD
DD
D
D
D
D
17
17
H
H
I
I
K
STEP8