GOKARTS USA TrailMaster MINI User manual

TrailMaster MINI
Instruction
Chain Adjustment of MINI XRS and MINI XRX Go-Kart
Version: 1.0
2011/9/17
Caution: Please read this instruction carefully before operating your vehicle. Fail to do this
might void your warranty.
ORDER PARTS
https://gokartsusa.com/PARTS-TrailMaster-Mini-XRS-Kids-Gokart.aspx

Chain Adjustment of MINI XRS and MINI XRX Go-Kart
1
In order to package the go-kart better, the chain adjustor is
loosen by packaging for shipment. The customer should adjust
the chain before driving. In this instruction the process of chain
adjustment is detailed introduced:
1. For the new purchased go-kart, the customer should only
tighten the nut of chain adjustor to adjust the rear chain. The
initial adjustment of chain has been carried out before delivery.
The tension of chain adjustment is required between 15-20mm.
2. If after step. 1 tightening the nut of chain adjustor the
chain is still too loose or too tight, another nut at the underpart
of chain adjustor must be adjusted accordingly.

Chain Adjustment of MINI XRS and MINI XRX Go-Kart
2
3. After the go-kart has been driven for a while, the drive
chain on clutch will be loosen and should be readjusted. At first,
four bolts fixing the engine on mount plate have to be loosen
until the engine can be moved. Then, adjust the chain adjusting
bolt at the front side of engine to tighten the chain to an
appropriate tension. At last, after adjusting screw the four bolts
tightly.

Chain Adjustment of MINI XRS and MINI XRX Go-Kart
3
Before driving please make sure that all parts are fixed after
adjusting and read the user manual of TrailMaster MINI Go-kart
carefully, you will be given with important safety information
and advices.
Thanks a lot for choosing TrailMaster MINI Go-kart.
For more other products of TrailMaster, please visit
www.bvpowersports.com !
BV Powersports, LLC
ORDER PARTS
https://gokartsusa.com/PARTS-TrailMaster-Mini-XRS-Kids-Gokart.aspx