Gold Note PST-10 User manual

OWNERʼS MANUAL
PST-10
EXTERNAL POWER SUPPLY FOR TURNTABLE


2
INDEX
PACKAGE CONTENT.......................................................................................................................................... P. 3
DESCRIPTION.................................................................................................................................................. P. 4
TECHNICAL SPECIFICATIONS............................................................................................................................ P. 5
FRONT AND REAR PANEL ................................................................................................................................ P. 5
SET-UP PST-10 ............................................................................................................................................... P. 6
QUICK START ................................................................................................................................................. P. 7
CONNECTING PST-10 ...................................................................................................................................... P. 8
WARRANTY AND SERVICE................................................................................................................................ P. 9
TROUBLESHOOTING....................................................................................................................................... P. 10
IMPORTANT SAFETY INFORMATION.................................................................................................................. P. 11

3
PACKAGE CONTENT
1 PST-10
1 AC cable
1 PST cable plug for Gold Note turntables
1 tool for voltage selection

4
DESCRIPTION
The PST-10 is a super inductive power supply designed for all Gold Note low voltage powered turntables.
PST-10 has been engineered with the best quality audio-grade components to enhance the performance of Gold Note
Turntables and improve your audio system getting the very best music experience out of your LP's.
PST-10 features a dual choke design powered by a double inductor driving the negative and positive high current stages and
featuring an inductive filter on the analogue stage.
The power supply performs 4 transformers 3 of which are strictly dedicated to power supply while 1 transformer exclusively
powers the inductive filter and the two chokes.
The Gold Note proprietary Dual Chokes Design perfectly filters the signal voltages in order to eliminate all the possible
electrical interferences coming from the AC power system.
The PST-10 uses its massive power supply to shield the turntables from electro-magnetic interferences thus insulating it
effectively from the AC power system.
The large, ultra-clean power enhances super low noise, greater dynamic, better resolution and finer details for a more
realistic high-end audio performance and pure audio pleasure.
Every Gold Note product is 100% proudly designed, manufactured and assembled in Italy!

5
TECHNICAL SPECIFICATIONS
MAIN FEATURES
Four audio grade Transformers
Four ultra low noise voltage regulator
+12V, +5V for logic
18V/26V/34V selectable, dedicated to Gold Note
Turntables
Inductive interference suppression filter
Line noise rejection >80dB
Common mode noise rejection >80dB
Connecting Cable: Silver custom cable powering the turntable
Full power response time <2,5µsec
POWER
100-120V / 220-240V, 50/60Hz
Nominal power: 25W
Dynamic power: >50W
Stand by Power: < 1W
DIMENSIONS AND WEIGHT
Dimensions: 200mm W 80mm H 260mm D
Weight: 3 Kg net - Kg. 4 boxed
FINISHES
Brushed Aluminium available in Black, Silver or Gold

6
FRONT AND REAR PANEL
STATUS LED
PLEASE NOTE
The STATUS LED turns to On position blue light only when PST-10 is connected to supply AC and the MASTER SWITCH is ON.
FRONT PANEL OVERVIEW
REAR PANEL OVERVIEW
GOLD NOTE
Hazardous Voltage.
Risk of Electrical Shock.
Disconnect power cord
from electrical outlet
before removing this
panel or starting any
service. AC IN 100 - 240 V
18V DC
26V DC
34V DC
OUTPUT VOLTAGE SELECTOR
GND
MADE IN ITALY
-
+
+
-
+
-
PSU
OUTPUT
GND GROUND
CONNECTOR
VOLTAGE ROTARY SWITCH
AC INPUT MASTER
SWITCH
MASTER
PSU OUT

7
SET-UP PST-10
IMPORTANT:
PST-10 must be connected only to Gold Note turntables with synchronous 12V motors. There are three different available
voltages for Gold Note turntables: 18Volt DC, 26Volt DC and 34Volt DC. PST-10 must be correctly set-up first, if the turntable is
powered with a wrong voltage it will be irremediably damaged.
BEFORE CONNECTING PST-10 TO YOUR TURNTABLE
All Gold Note turntables MEDITERRANEO - GIGLIO - PIANOSA - VALORE PLUS - VALORE LITE, are equipped with a standard Wall-Wart
power supply. Please verify the voltage written of the Wall-Wart to know how to set-up the PST-10.

8
QUICK START
INSTALLING THE PST-10
1. Connect the PST-10 to the AC power outlet using the supplied power cord then before connecting the turntable select the
correct original voltage as above described.
2. Connect the PST-10 to the Turntable using the supplied cable from PSU OUT on PST-10 to the turntable rounded plug.
3. Turn on the MASTER SWITCH on the rear panel of the PST-10 for operating the Turntable from its 33/45 switches.
PST-10 OUTPUT VOLTAGE SETTING
1Connect only the AC cable
2Turn on the PST-10 with the MASTER SWITCH on the rear panel
3Using the special tool screwdriver act on the VOLTAGE ROTARY SWITCH select the voltage corresponding to the one written
on the original Wall-Wart power supply of your turntable as shown in the previous photo. The correct voltage selection is shown
by the related LED lighting up.
4The PST-10 is ready to be connected to your turntable via the supplied cable.
GOLD NOTE
Hazardous Voltage.
Risk of Electrical Shock.
Disconnect power cord
from electrical outlet
before removing this
panel or starting any
service. AC IN 100 - 240 V
18V DC
26V DC
34V DC
OUTPUT VOLTAGE SELECTOR
GND
MADE IN ITALY
-
+
+
-
+
-
MASTER
PSU OUT
VOLTAGE ROTARY SWITCH
VOLTAGE LED

GOLD NOTE
Hazardous Voltage.
Risk of Electrical Shock.
Disconnect powercord
from electrical outlet
before removingthis
panel or starting any
service. AC IN 100 - 240 V
18V DC
26V DC
34V DC
OUTPUT VOLTAGE SELECTOR
GND
MADE IN ITALY
-
+
+
-
+
-
MASTER
PSU OUT
GOLD NOTE
Hazardous Voltage.
Risk of Electrical Shock.
Disconnect powercord
from electrical outlet
before removingthis
panel or starting any
service. AC IN 100 - 240 V
18V DC
26V DC
34V DC
OUTPUT VOLTAGE SELECTOR
GND
MADE IN ITALY
-
+
+
-
+
-
MASTER
PSU OUT
GOLD NOTE
Hazardous Voltage.
Risk of Electrical Shock.
Disconnect powercord
from electrical outlet
before removingthis
panel or starting any
service. AC IN 100 - 240 V
18V DC
26V DC
34V DC
OUTPUT VOLTAGE SELECTOR
GND
MADE IN ITALY
-
+
+
-
+
-
MASTER
PSU OUT
9
PST CABLE PLUG
CONNECTING PST-10
PST-10MEDITERRANEO/GIGLIO/PIANOSA
VALORE 425 LITE
VALORE 425 PLUS - REAR PANEL OF TSC
(Turntable Speed Control)
CONNECTING PST-10 TO GOLD NOTE TURNTABLES

WARRANTY AND SERVICE
10
WARRANTY
To validate the warranty is necessary to register the unit on the Gold Note internet web site within 15 days from
the purchase on the appropriate area of the web site: www.goldnote.it/warranty
If the unit is not registered correctly or has been purchased from a different country of the purchaser home address
the unit will not be covered by any warranty and the registration will be refused.
The warranty does not cover in any case: Tubes, Phono Cartridge Stylus and Batteries.
SERVICE
Every GOLD NOTE® product is the result of meticulous technological research, and consequently their correct
functioning is guaranteed. In spite of this it is possible that problems may emerge which non-specialist users
cannot resolve.
In this case, contact your dealer to be advised on how the fault can be solved.
Do not return any object directly to the factory or to the distributor without being authorised to do so.
In such cases both GOLD NOTE® and the distribution agents decline responsibility of any kind.
For more information please visit www.goldnote.it/service
PLEASE NOTE
Descriptions and technical characteristics may vary at any time and without notice.

11
TROUBLESHOOTING
SOLUTIONCAUSEPROBLEM
The LED on the front
panel is OFF
Turntable does not work
properly
The POWER CORD is
damaged or not plugged in
The PST CONNECTION CABLE
is not plugged correctly
The MASTER SWITCH is OFF
Fuse blown
For spare parts visit the official Gold Note store at:
www.akamaiaudio.it
Ensure that the POWER CORD is not damaged and connect it
properly to the power outlet and the AC plug on PST-10
Verify the PST-10 CABLE is not damaged and connect it
properly to the PSU OUT port on the PST-10 and to the
Turntable rounded plug. The Voltage must be selected the same
of the original Wall-Wart power supply to avoid damaging the
turntable electronics.
Turn ON the MASTER SWITCH on the rear panel of PST-10
Replace only with same type (0,5A F 5x20mm)

12
IMPORTANT SAFETY INFORMATION
This appliance has a serial number located on the rear panel.
Please record the model and serial number and retain them for your records.
Serial Number:
Model:
CAUTION!
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER ONLY TO QUALIFIED GOLD NOTE SERVICE PERSONNEL FOR SERVICE
WARNING!
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE
Do not disassemble any part of the product.
Do not use any part of the product for other purposes.
For service and problems of any kind, contact qualified Gold Note personnel.
Protect the product from rain and humidity and keep away from heat sources, electric and electronic motors etc.
The power Chord supplied must be used only on this unit.
Gold Note does not have responsibility for any improper use of this unit.

13
IMPORTANT SAFETY INFORMATION
1. Read these instructions and store them.
2. Heed all warnings.
3. Follow the instructions.
4. Do not use this apparatus near water.
5. Clean only with a dry cloth.
6. Do not block the ventilation openings and install in
accordance with the manufacturer's instructions.
7. Do not install near heat sources such as radiators, heat
registers, stoves or other apparatus (including amplifiers)
that produce heat.
8. Do not defeat the safety purpose of the polarised or
grounding-type plug: a polarised plug has two blades with
one wider than the other.
A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for
your safety.
If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
9. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
10. Only use attachments/accessories specified by the
manufacturer.
11. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
12. Unplug this apparatus during lightning storms or
when unused for long periods of time.
13. Refer all servicing to qualified service personnel only.
Servicing is required when the apparatus has been
damaged in any way (such as when the power cord or
plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed
to rain or moisture) and in any case when the apparatus
does not operate normally or has been dropped.

Other manuals for PST-10
1
Table of contents
Other Gold Note Power Supply manuals

Gold Note
Gold Note PSU-10 User manual

Gold Note
Gold Note PSU-1 User manual

Gold Note
Gold Note PSU-1250 User manual

Gold Note
Gold Note PSU-10 EVO User manual

Gold Note
Gold Note PH-1000 User manual

Gold Note
Gold Note PSU-1250 User manual

Gold Note
Gold Note Donatello Gold User manual

Gold Note
Gold Note PSU-1250 User manual

Gold Note
Gold Note PST-10 User manual

Gold Note
Gold Note PSU-10 User manual