GOLFTEC Skytrak+ User manual
�
SKYTRAI<
TM
SlTral<+
02
I
What's in the Box
SKYTRAI<
Skal<
+
contains a Lithium-polymer rechargeable battery
that can operate up to 5 hours on a full charge.
*
IMPORNT: Skak
+
must be charged for a minimum of
6 hours before use.
NOTE:
NOTE:
Powering On/Off
*
02 I
What's in the Box
SKYTRAI<
Skal<
+
contains a Lithium-polymer rechargeable battery
that can operate up to 5 hours on a full charge.
*
IMPORNT: Skak
+
must be charged for a minimum of
6 hours before use.
NOTE:
NOTE:
Powering On/Off
*
Download the Sk yTr ak Software
Find the SkyTrak software in the Apple® AppStore, Google® Play Store
or PC download available here: www.skytrakgolf.com/downloads.
Register Your SkyTrak+
Launch the SkyTrak software on your iOS or Android device or PC.
Select the Create Account option to create a SkyTrak online account.
Select Register to register your SkyTrak+. Your unique serial number
will display and register to the account created.
Your SkyTrak+ must be registered within 30 days of purchase.
SkyTrak+ comes with basic functionality out of the box. Full app
features are available with a SkyTrak annual subscription plan which
can be purchased at www.skytrakgolf.com.
2
Setting up your SkyTrak for the first time is a simple
3-step process:
1
a. Pair SkyTrak+ With Your Mobile Device
Direct Wi-Fi Connection: Follow the instructions in the SkyTrak
software application to pair your mobile device directly to SkyTrak+
via its Wi-Fi signal. Your mobile device will NOT have an internet
connection when connected in this manner.
Network Connection (recommended): SkyTrak+ can use your
wireless (Wi-Fi) home network to pair with your mobile device by
connecting to your network router. SkyTrak+ will communicate with
the software on your mobile device through your router. Plus, you will
retain access to the internet on your mobile device.
b. Pair SkyTrak With Your PC
Direct Wi-Fi Connection on PC: Click on the Wi-Fi signal icon on
your PC and select SkyTrak from the drop down menu, click Connect.
USB Cable Connection: Connect the USB cable to the SkyTrak+
device and a USB port on your PC
Network Connection: SkyTrak can use your wireless (Wi-Fi) home
network to pair with your PC by connecting to your wireless network
router, just like your computer and mobile devices do. SkyTrak will
communicate with the software on your PC through your router.
Plus, you will retain access to the internet on your PC. If you are using
the USB cable connection, remain connected to your wireless home
network.
3
SETUP TIP: Once SkyTrak+ has been successfully configured and
connected with the software on your iPad, all three LEDs will turn green
and you will see a red laser dot projected onto your hitting surface.
Getting Started
Getting Started
04 SKYTRAK+ QUICK START GUIDE
05
WWW.SKYTRAKGOLF.COM
Download the Sk yTr ak Software
Find the SkyTrak software in the Apple® AppStore, Google® Play Store
or PC download available here: www.skytrakgolf.com/downloads.
Register Your SkyTrak+
Launch the SkyTrak software on your iOS or Android device or PC.
Select the Create Account option to create a SkyTrak online account.
Select Register to register your SkyTrak+. Your unique serial number
will display and register to the account created.
Your SkyTrak+ must be registered within 30 days of purchase.
SkyTrak+ comes with basic functionality out of the box. Full app
features are available with a SkyTrak annual subscription plan which
can be purchased at www.skytrakgolf.com.
2
Setting up your SkyTrak for the first time is a simple
3-step process:
1
a. Pair SkyTrak+ With Your Mobile Device
Direct Wi-Fi Connection: Follow the instructions in the SkyTrak
software application to pair your mobile device directly to SkyTrak+
via its Wi-Fi signal. Your mobile device will NOT have an internet
connection when connected in this manner.
Network Connection (recommended): SkyTrak+ can use your
wireless (Wi-Fi) home network to pair with your mobile device by
connecting to your network router. SkyTrak+ will communicate with
the software on your mobile device through your router. Plus, you will
retain access to the internet on your mobile device.
b. Pair SkyTrak With Your PC
Direct Wi-Fi Connection on PC: Click on the Wi-Fi signal icon on
your PC and select SkyTrak from the drop down menu, click Connect.
USB Cable Connection: Connect the USB cable to the SkyTrak+
device and a USB port on your PC
Network Connection: SkyTrak can use your wireless (Wi-Fi) home
network to pair with your PC by connecting to your wireless network
router, just like your computer and mobile devices do. SkyTrak will
communicate with the software on your PC through your router.
Plus, you will retain access to the internet on your PC. If you are using
the USB cable connection, remain connected to your wireless home
network.
3
SETUP TIP: Once SkyTrak+ has been successfully configured and
connected with the software on your iPad, all three LEDs will turn green
and you will see a red laser dot projected onto your hitting surface.
Getting Started
Getting Started
04 SKYTRAK+ QUICK START GUIDE
05
WWW.SKYTRAKGOLF.COM
n
n
-or-
0
9
SETUP TIP: For optimum spin results, place the ball on the laser dot with
some kind of marking on the golf ball, such as its brand logo, facing toward lens
prior to hitting.
o
o o
-or-
0
9
SETUP TIP: For optimum spin results, place the ball on the laser dot with
some kind of marking on the golf ball, such as its brand logo, facing toward lens
prior to hitting.
o
o o
Power
LED
Wi-Fi
LED
Ready
LED Description
Battery is low and SkyTrak+ is about to turn itself
off. Please charge your SkyTrak+ as soon as
possible.
SkyTrak+ is in Direct Connect Mode, waiting for
a connection with the SkyTrak Application on
your tablet.
SkyTrak+ is in Network Mode and it is attempting
to locate and connect to a known Wi-Fi network.
SkyTrak+ is in Network Mode and it has located
a known Wi-Fi network. It is attempting to
connect to that network.
SkyTrak+ is in Network Mode and it is connected
to a known network. It is waiting for a connection
with the software on your tablet.
SkyTrak+ is connected to the Application. If the
Ready LED is not turning green quickly, please
check to see if SkyTrak+ is tilted instead of
being level.
SkyTrak+ is ready for your next shot.
SkyTrak+ is charging.
SkyTrak+ is charging, but the power of the
charger is not adequate, it may take a long time
for your SkyTrak+ to charge.
Use this chart to identify or troubleshoot SkyTrak’s various operational modes.
Problem Solution
When charging, ‘Power’
LED does not come on
(AMBER)
Press and hold the Power button for 5 seconds. Make
sure the USB cable has power. Try other ports on your
computer or use a compatible USB wall charger.
SkyTrak+ should be turned OFF to charge.
All 3 LED’s turn red and unit
turns off after 15 seconds
Battery is low. Connect the USB cable and charge the unit.
The Power LED will turn off when SkyTrak+ is fully
charged and ready to go.
‘Wi-Fi’ LED is not turning
green
First, ensure that your SkyTrak+ is connected to the
Wi-Fi network. Then start the SkyTrak software on
your iPad and allow it to load. When the application is
open, SkyTrak’s LEDs will show whether it successfully
connected.
Wi-Fi and Power LEDs are
green, but ‘Ready’ (top)
LED is red
Your SkyTrak+ may have been triggered by a waggle
or other club movement. If you’ll wait a few seconds, it
should turn green again. If it still doesn’t turn green, you
should check your Wi-Fi connection and restart the
application on your iPad.
Results seem inaccurate Be sure to position the ball correctly on the red dot and
make sure the unit sits level with the hitting surface. If
using a tee, make sure the base of the tee is on the red
dot.
Troubleshooting
LED Color Code Chart
10 SKYTRAK+ QUICK START GUIDE
11
WWW.SKYTRAKGOLF.COM
Should this Trouble Shooting Guide not answer your question, please refer to
our Support Center at support.skytrakgolf.com, or you can contact
Customer Support at 1-833-SKYTRAK
Power
LED
Wi-Fi
LED
Ready
LED Description
Battery is low and SkyTrak+ is about to turn itself
off. Please charge your SkyTrak+ as soon as
possible.
SkyTrak+ is in Direct Connect Mode, waiting for
a connection with the SkyTrak Application on
your tablet.
SkyTrak+ is in Network Mode and it is attempting
to locate and connect to a known Wi-Fi network.
SkyTrak+ is in Network Mode and it has located
a known Wi-Fi network. It is attempting to
connect to that network.
SkyTrak+ is in Network Mode and it is connected
to a known network. It is waiting for a connection
with the software on your tablet.
SkyTrak+ is connected to the Application. If the
Ready LED is not turning green quickly, please
check to see if SkyTrak+ is tilted instead of
being level.
SkyTrak+ is ready for your next shot.
SkyTrak+ is charging.
SkyTrak+ is charging, but the power of the
charger is not adequate, it may take a long time
for your SkyTrak+ to charge.
Use this chart to identify or troubleshoot SkyTrak’s various operational modes.
Problem Solution
When charging, ‘Power’
LED does not come on
(AMBER)
Press and hold the Power button for 5 seconds. Make
sure the USB cable has power. Try other ports on your
computer or use a compatible USB wall charger.
SkyTrak+ should be turned OFF to charge.
All 3 LED’s turn red and unit
turns off after 15 seconds
Battery is low. Connect the USB cable and charge the unit.
The Power LED will turn off when SkyTrak+ is fully
charged and ready to go.
‘Wi-Fi’ LED is not turning
green
First, ensure that your SkyTrak+ is connected to the
Wi-Fi network. Then start the SkyTrak software on
your iPad and allow it to load. When the application is
open, SkyTrak’s LEDs will show whether it successfully
connected.
Wi-Fi and Power LEDs are
green, but ‘Ready’ (top)
LED is red
Your SkyTrak+ may have been triggered by a waggle
or other club movement. If you’ll wait a few seconds, it
should turn green again. If it still doesn’t turn green, you
should check your Wi-Fi connection and restart the
application on your iPad.
Results seem inaccurate Be sure to position the ball correctly on the red dot and
make sure the unit sits level with the hitting surface. If
using a tee, make sure the base of the tee is on the red
dot.
Troubleshooting
LED Color Code Chart
10 SKYTRAK+ QUICK START GUIDE 11
WWW.SKYTRAKGOLF.COM
Should this Trouble Shooting Guide not answer your question, please refer to
our Support Center at support.skytrakgolf.com, or you can contact
Customer Support at 1-833-SKYTRAK
Power
LED
Wi-Fi
LED
Ready
LED Description
Battery is low and SkyTrak+ is about to turn itself
off. Please charge your SkyTrak+ as soon as
possible.
SkyTrak+ is in Direct Connect Mode, waiting for
a connection with the SkyTrak Application on
your tablet.
SkyTrak+ is in Network Mode and it is attempting
to locate and connect to a known Wi-Fi network.
SkyTrak+ is in Network Mode and it has located
a known Wi-Fi network. It is attempting to
connect to that network.
SkyTrak+ is in Network Mode and it is connected
to a known network. It is waiting for a connection
with the software on your tablet.
SkyTrak+ is connected to the Application. If the
Ready LED is not turning green quickly, please
check to see if SkyTrak+ is tilted instead of
being level.
SkyTrak+ is ready for your next shot.
SkyTrak+ is charging.
SkyTrak+ is charging, but the power of the
charger is not adequate, it may take a long time
for your SkyTrak+ to charge.
Use this chart to identify or troubleshoot SkyTrak’s various operational modes.
Problem Solution
When charging, ‘Power’
LED does not come on
(AMBER)
Press and hold the Power button for 5 seconds. Make
sure the USB cable has power. Try other ports on your
computer or use a compatible USB wall charger.
SkyTrak+ should be turned OFF to charge.
All 3 LED’s turn red and unit
turns off after 15 seconds
Battery is low. Connect the USB cable and charge the unit.
The Power LED will turn off when SkyTrak+ is fully
charged and ready to go.
‘Wi-Fi’ LED is not turning
green
First, ensure that your SkyTrak+ is connected to the
Wi-Fi network. Then start the SkyTrak software on
your iPad and allow it to load. When the application is
open, SkyTrak’s LEDs will show whether it successfully
connected.
Wi-Fi and Power LEDs are
green, but ‘Ready’ (top)
LED is red
Your SkyTrak+ may have been triggered by a waggle
or other club movement. If you’ll wait a few seconds, it
should turn green again. If it still doesn’t turn green, you
should check your Wi-Fi connection and restart the
application on your iPad.
Results seem inaccurate Be sure to position the ball correctly on the red dot and
make sure the unit sits level with the hitting surface. If
using a tee, make sure the base of the tee is on the red
dot.
Troubleshooting
LED Color Code Chart
10 SKYTRAK+ QUICK START GUIDE 11
WWW.SKYTRAKGOLF.COM
Should this Trouble Shooting Guide not answer your question, please refer to
our Support Center at support.skytrakgolf.com, or you can contact
Customer Support at 1-833-SKYTRAK
SkyTrak+ is charging
02 I
What's in the Box
SKYTRAI<
Skal<
+
contains a Lithium-polymer rechargeable battery
that can operate up to 5 hours on a full charge.
*
IMPORNT: Skak
+
must be charged for a minimum of
6 hours before use.
NOTE:
NOTE:
Powering On/Off
*
LED Locations
Description
Power
LED
Wi-Fi
LED
Ready
LED Description
Battery is low and SkyTrak+ is about to turn itself
off. Please charge your SkyTrak+ as soon as
possible.
SkyTrak+ is in Direct Connect Mode, waiting for
a connection with the SkyTrak Application on
your tablet.
SkyTrak+ is in Network Mode and it is attempting
to locate and connect to a known Wi-Fi network.
SkyTrak+ is in Network Mode and it has located
a known Wi-Fi network. It is attempting to
connect to that network.
SkyTrak+ is in Network Mode and it is connected
to a known network. It is waiting for a connection
with the software on your tablet.
SkyTrak+ is connected to the Application. If the
Ready LED is not turning green quickly, please
check to see if SkyTrak+ is tilted instead of
being level.
SkyTrak+ is ready for your next shot.
SkyTrak+ is charging.
SkyTrak+ is charging, but the power of the
charger is not adequate, it may take a long time
for your SkyTrak+ to charge.
Use this chart to identify or troubleshoot SkyTrak’s various operational modes.
Problem Solution
When charging, ‘Power’
LED does not come on
(AMBER)
Press and hold the Power button for 5 seconds. Make
sure the USB cable has power. Try other ports on your
computer or use a compatible USB wall charger.
SkyTrak+ should be turned OFF to charge.
All 3 LED’s turn red and unit
turns off after 15 seconds
Battery is low. Connect the USB cable and charge the unit.
The Power LED will turn off when SkyTrak+ is fully
charged and ready to go.
‘Wi-Fi’ LED is not turning
green
First, ensure that your SkyTrak+ is connected to the
Wi-Fi network. Then start the SkyTrak software on
your iPad and allow it to load. When the application is
open, SkyTrak’s LEDs will show whether it successfully
connected.
Wi-Fi and Power LEDs are
green, but ‘Ready’ (top)
LED is red
Your SkyTrak+ may have been triggered by a waggle
or other club movement. If you’ll wait a few seconds, it
should turn green again. If it still doesn’t turn green, you
should check your Wi-Fi connection and restart the
application on your iPad.
Results seem inaccurate Be sure to position the ball correctly on the red dot and
make sure the unit sits level with the hitting surface. If
using a tee, make sure the base of the tee is on the red
dot.
Troubleshooting
LED Color Code Chart
10 SKYTRAK+ QUICK START GUIDE 11
WWW.SKYTRAKGOLF.COM
Should this Trouble Shooting Guide not answer your question, please refer to
our Support Center at support.skytrakgolf.com, or you can contact
Customer Support at 1-833-SKYTRAK
Power
LED
Wi-Fi
LED
Ready
LED Description
Battery is low and SkyTrak+ is about to turn itself
off. Please charge your SkyTrak+ as soon as
possible.
SkyTrak+ is in Direct Connect Mode, waiting for
a connection with the SkyTrak Application on
your tablet.
SkyTrak+ is in Network Mode and it is attempting
to locate and connect to a known Wi-Fi network.
SkyTrak+ is in Network Mode and it has located
a known Wi-Fi network. It is attempting to
connect to that network.
SkyTrak+ is in Network Mode and it is connected
to a known network. It is waiting for a connection
with the software on your tablet.
SkyTrak+ is connected to the Application. If the
Ready LED is not turning green quickly, please
check to see if SkyTrak+ is tilted instead of
being level.
SkyTrak+ is ready for your next shot.
SkyTrak+ is charging.
SkyTrak+ is charging, but the power of the
charger is not adequate, it may take a long time
for your SkyTrak+ to charge.
Use this chart to identify or troubleshoot SkyTrak’s various operational modes.
Problem Solution
When charging, ‘Power’
LED does not come on
(AMBER)
Press and hold the Power button for 5 seconds. Make
sure the USB cable has power. Try other ports on your
computer or use a compatible USB wall charger.
SkyTrak+ should be turned OFF to charge.
All 3 LED’s turn red and unit
turns off after 15 seconds
Battery is low. Connect the USB cable and charge the unit.
The Power LED will turn off when SkyTrak+ is fully
charged and ready to go.
‘Wi-Fi’ LED is not turning
green
First, ensure that your SkyTrak+ is connected to the
Wi-Fi network. Then start the SkyTrak software on
your iPad and allow it to load. When the application is
open, SkyTrak’s LEDs will show whether it successfully
connected.
Wi-Fi and Power LEDs are
green, but ‘Ready’ (top)
LED is red
Your SkyTrak+ may have been triggered by a waggle
or other club movement. If you’ll wait a few seconds, it
should turn green again. If it still doesn’t turn green, you
should check your Wi-Fi connection and restart the
application on your iPad.
Results seem inaccurate Be sure to position the ball correctly on the red dot and
make sure the unit sits level with the hitting surface. If
using a tee, make sure the base of the tee is on the red
dot.
Troubleshooting
LED Color Code Chart
10 SKYTRAK+ QUICK START GUIDE 11
WWW.SKYTRAKGOLF.COM
Should this Trouble Shooting Guide not answer your question, please refer to
our Support Center at support.skytrakgolf.com, or you can contact
Customer Support at 1-833-SKYTRAK
Power
LED
Wi-Fi
LED
Ready
LED Description
Battery is low and SkyTrak+ is about to turn itself
off. Please charge your SkyTrak+ as soon as
possible.
SkyTrak+ is in Direct Connect Mode, waiting for
a connection with the SkyTrak Application on
your tablet.
SkyTrak+ is in Network Mode and it is attempting
to locate and connect to a known Wi-Fi network.
SkyTrak+ is in Network Mode and it has located
a known Wi-Fi network. It is attempting to
connect to that network.
SkyTrak+ is in Network Mode and it is connected
to a known network. It is waiting for a connection
with the software on your tablet.
SkyTrak+ is connected to the Application. If the
Ready LED is not turning green quickly, please
check to see if SkyTrak+ is tilted instead of
being level.
SkyTrak+ is ready for your next shot.
SkyTrak+ is charging.
SkyTrak+ is charging, but the power of the
charger is not adequate, it may take a long time
for your SkyTrak+ to charge.
Use this chart to identify or troubleshoot SkyTrak’s various operational modes.
Problem Solution
When charging, ‘Power’
LED does not come on
(AMBER)
Press and hold the Power button for 5 seconds. Make
sure the USB cable has power. Try other ports on your
computer or use a compatible USB wall charger.
SkyTrak+ should be turned OFF to charge.
All 3 LED’s turn red and unit
turns off after 15 seconds
Battery is low. Connect the USB cable and charge the unit.
The Power LED will turn off when SkyTrak+ is fully
charged and ready to go.
‘Wi-Fi’ LED is not turning
green
First, ensure that your SkyTrak+ is connected to the
Wi-Fi network. Then start the SkyTrak software on
your iPad and allow it to load. When the application is
open, SkyTrak’s LEDs will show whether it successfully
connected.
Wi-Fi and Power LEDs are
green, but ‘Ready’ (top)
LED is red
Your SkyTrak+ may have been triggered by a waggle
or other club movement. If you’ll wait a few seconds, it
should turn green again. If it still doesn’t turn green, you
should check your Wi-Fi connection and restart the
application on your iPad.
Results seem inaccurate Be sure to position the ball correctly on the red dot and
make sure the unit sits level with the hitting surface. If
using a tee, make sure the base of the tee is on the red
dot.
Troubleshooting
LED Color Code Chart
10 SKYTRAK+ QUICK START GUIDE 11
WWW.SKYTRAKGOLF.COM
Should this Trouble Shooting Guide not answer your question, please refer to
our Support Center at support.skytrakgolf.com, or you can contact
Customer Support at 1-833-SKYTRAK
Battery is low and SkyTrak+ is about to turn
itself off. Please charge your SkyTrak+ as
soon as possible.
Power
LED
Wi-Fi
LED
Ready
LED Description
Battery is low and SkyTrak+ is about to turn itself
off. Please charge your SkyTrak+ as soon as
possible.
SkyTrak+ is in Direct Connect Mode, waiting for
a connection with the SkyTrak Application on
your tablet.
SkyTrak+ is in Network Mode and it is attempting
to locate and connect to a known Wi-Fi network.
SkyTrak+ is in Network Mode and it has located
a known Wi-Fi network. It is attempting to
connect to that network.
SkyTrak+ is in Network Mode and it is connected
to a known network. It is waiting for a connection
with the software on your tablet.
SkyTrak+ is connected to the Application. If the
Ready LED is not turning green quickly, please
check to see if SkyTrak+ is tilted instead of
being level.
SkyTrak+ is ready for your next shot.
SkyTrak+ is charging.
SkyTrak+ is charging, but the power of the
charger is not adequate, it may take a long time
for your SkyTrak+ to charge.
Use this chart to identify or troubleshoot SkyTrak’s various operational modes.
Problem Solution
When charging, ‘Power’
LED does not come on
(AMBER)
Press and hold the Power button for 5 seconds. Make
sure the USB cable has power. Try other ports on your
computer or use a compatible USB wall charger.
SkyTrak+ should be turned OFF to charge.
All 3 LED’s turn red and unit
turns off after 15 seconds
Battery is low. Connect the USB cable and charge the unit.
The Power LED will turn off when SkyTrak+ is fully
charged and ready to go.
‘Wi-Fi’ LED is not turning
green
First, ensure that your SkyTrak+ is connected to the
Wi-Fi network. Then start the SkyTrak software on
your iPad and allow it to load. When the application is
open, SkyTrak’s LEDs will show whether it successfully
connected.
Wi-Fi and Power LEDs are
green, but ‘Ready’ (top)
LED is red
Your SkyTrak+ may have been triggered by a waggle
or other club movement. If you’ll wait a few seconds, it
should turn green again. If it still doesn’t turn green, you
should check your Wi-Fi connection and restart the
application on your iPad.
Results seem inaccurate Be sure to position the ball correctly on the red dot and
make sure the unit sits level with the hitting surface. If
using a tee, make sure the base of the tee is on the red
dot.
Troubleshooting
LED Color Code Chart
10 SKYTRAK+ QUICK START GUIDE 11
WWW.SKYTRAKGOLF.COM
Should this Trouble Shooting Guide not answer your question, please refer to
our Support Center at support.skytrakgolf.com, or you can contact
Customer Support at 1-833-SKYTRAK
Power
LED
Wi-Fi
LED
Ready
LED Description
Battery is low and SkyTrak+ is about to turn itself
off. Please charge your SkyTrak+ as soon as
possible.
SkyTrak+ is in Direct Connect Mode, waiting for
a connection with the SkyTrak Application on
your tablet.
SkyTrak+ is in Network Mode and it is attempting
to locate and connect to a known Wi-Fi network.
SkyTrak+ is in Network Mode and it has located
a known Wi-Fi network. It is attempting to
connect to that network.
SkyTrak+ is in Network Mode and it is connected
to a known network. It is waiting for a connection
with the software on your tablet.
SkyTrak+ is connected to the Application. If the
Ready LED is not turning green quickly, please
check to see if SkyTrak+ is tilted instead of
being level.
SkyTrak+ is ready for your next shot.
SkyTrak+ is charging.
SkyTrak+ is charging, but the power of the
charger is not adequate, it may take a long time
for your SkyTrak+ to charge.
Use this chart to identify or troubleshoot SkyTrak’s various operational modes.
Problem Solution
When charging, ‘Power’
LED does not come on
(AMBER)
Press and hold the Power button for 5 seconds. Make
sure the USB cable has power. Try other ports on your
computer or use a compatible USB wall charger.
SkyTrak+ should be turned OFF to charge.
All 3 LED’s turn red and unit
turns off after 15 seconds
Battery is low. Connect the USB cable and charge the unit.
The Power LED will turn off when SkyTrak+ is fully
charged and ready to go.
‘Wi-Fi’ LED is not turning
green
First, ensure that your SkyTrak+ is connected to the
Wi-Fi network. Then start the SkyTrak software on
your iPad and allow it to load. When the application is
open, SkyTrak’s LEDs will show whether it successfully
connected.
Wi-Fi and Power LEDs are
green, but ‘Ready’ (top)
LED is red
Your SkyTrak+ may have been triggered by a waggle
or other club movement. If you’ll wait a few seconds, it
should turn green again. If it still doesn’t turn green, you
should check your Wi-Fi connection and restart the
application on your iPad.
Results seem inaccurate Be sure to position the ball correctly on the red dot and
make sure the unit sits level with the hitting surface. If
using a tee, make sure the base of the tee is on the red
dot.
Troubleshooting
LED Color Code Chart
10 SKYTRAK+ QUICK START GUIDE 11
WWW.SKYTRAKGOLF.COM
Should this Trouble Shooting Guide not answer your question, please refer to
our Support Center at support.skytrakgolf.com, or you can contact
Customer Support at 1-833-SKYTRAK
Power
LED
Wi-Fi
LED
Ready
LED Description
Battery is low and SkyTrak+ is about to turn itself
off. Please charge your SkyTrak+ as soon as
possible.
SkyTrak+ is in Direct Connect Mode, waiting for
a connection with the SkyTrak Application on
your tablet.
SkyTrak+ is in Network Mode and it is attempting
to locate and connect to a known Wi-Fi network.
SkyTrak+ is in Network Mode and it has located
a known Wi-Fi network. It is attempting to
connect to that network.
SkyTrak+ is in Network Mode and it is connected
to a known network. It is waiting for a connection
with the software on your tablet.
SkyTrak+ is connected to the Application. If the
Ready LED is not turning green quickly, please
check to see if SkyTrak+ is tilted instead of
being level.
SkyTrak+ is ready for your next shot.
SkyTrak+ is charging.
SkyTrak+ is charging, but the power of the
charger is not adequate, it may take a long time
for your SkyTrak+ to charge.
Use this chart to identify or troubleshoot SkyTrak’s various operational modes.
Problem Solution
When charging, ‘Power’
LED does not come on
(AMBER)
Press and hold the Power button for 5 seconds. Make
sure the USB cable has power. Try other ports on your
computer or use a compatible USB wall charger.
SkyTrak+ should be turned OFF to charge.
All 3 LED’s turn red and unit
turns off after 15 seconds
Battery is low. Connect the USB cable and charge the unit.
The Power LED will turn off when SkyTrak+ is fully
charged and ready to go.
‘Wi-Fi’ LED is not turning
green
First, ensure that your SkyTrak+ is connected to the
Wi-Fi network. Then start the SkyTrak software on
your iPad and allow it to load. When the application is
open, SkyTrak’s LEDs will show whether it successfully
connected.
Wi-Fi and Power LEDs are
green, but ‘Ready’ (top)
LED is red
Your SkyTrak+ may have been triggered by a waggle
or other club movement. If you’ll wait a few seconds, it
should turn green again. If it still doesn’t turn green, you
should check your Wi-Fi connection and restart the
application on your iPad.
Results seem inaccurate Be sure to position the ball correctly on the red dot and
make sure the unit sits level with the hitting surface. If
using a tee, make sure the base of the tee is on the red
dot.
Troubleshooting
LED Color Code Chart
10 SKYTRAK+ QUICK START GUIDE 11
WWW.SKYTRAKGOLF.COM
Should this Trouble Shooting Guide not answer your question, please refer to
our Support Center at support.skytrakgolf.com, or you can contact
Customer Support at 1-833-SKYTRAK
SkyTrak+ is in Direct Connect Mode, waiting
for a connection with the SKyTrak application.
Power WiFi Ready
Power
LED
Wi-Fi
LED
Ready
LED Description
Battery is low and SkyTrak+ is about to turn itself
off. Please charge your SkyTrak+ as soon as
possible.
SkyTrak+ is in Direct Connect Mode, waiting for
a connection with the SkyTrak Application on
your tablet.
SkyTrak+ is in Network Mode and it is attempting
to locate and connect to a known Wi-Fi network.
SkyTrak+ is in Network Mode and it has located
a known Wi-Fi network. It is attempting to
connect to that network.
SkyTrak+ is in Network Mode and it is connected
to a known network. It is waiting for a connection
with the software on your tablet.
SkyTrak+ is connected to the Application. If the
Ready LED is not turning green quickly, please
check to see if SkyTrak+ is tilted instead of
being level.
SkyTrak+ is ready for your next shot.
SkyTrak+ is charging.
SkyTrak+ is charging, but the power of the
charger is not adequate, it may take a long time
for your SkyTrak+ to charge.
Use this chart to identify or troubleshoot SkyTrak’s various operational modes.
Problem Solution
When charging, ‘Power’
LED does not come on
(AMBER)
Press and hold the Power button for 5 seconds. Make
sure the USB cable has power. Try other ports on your
computer or use a compatible USB wall charger.
SkyTrak+ should be turned OFF to charge.
All 3 LED’s turn red and unit
turns off after 15 seconds
Battery is low. Connect the USB cable and charge the unit.
The Power LED will turn off when SkyTrak+ is fully
charged and ready to go.
‘Wi-Fi’ LED is not turning
green
First, ensure that your SkyTrak+ is connected to the
Wi-Fi network. Then start the SkyTrak software on
your iPad and allow it to load. When the application is
open, SkyTrak’s LEDs will show whether it successfully
connected.
Wi-Fi and Power LEDs are
green, but ‘Ready’ (top)
LED is red
Your SkyTrak+ may have been triggered by a waggle
or other club movement. If you’ll wait a few seconds, it
should turn green again. If it still doesn’t turn green, you
should check your Wi-Fi connection and restart the
application on your iPad.
Results seem inaccurate Be sure to position the ball correctly on the red dot and
make sure the unit sits level with the hitting surface. If
using a tee, make sure the base of the tee is on the red
dot.
Troubleshooting
LED Color Code Chart
10 SKYTRAK+ QUICK START GUIDE 11
WWW.SKYTRAKGOLF.COM
Should this Trouble Shooting Guide not answer your question, please refer to
our Support Center at support.skytrakgolf.com, or you can contact
Customer Support at 1-833-SKYTRAK
Power
LED
Wi-Fi
LED
Ready
LED Description
Battery is low and SkyTrak+ is about to turn itself
off. Please charge your SkyTrak+ as soon as
possible.
SkyTrak+ is in Direct Connect Mode, waiting for
a connection with the SkyTrak Application on
your tablet.
SkyTrak+ is in Network Mode and it is attempting
to locate and connect to a known Wi-Fi network.
SkyTrak+ is in Network Mode and it has located
a known Wi-Fi network. It is attempting to
connect to that network.
SkyTrak+ is in Network Mode and it is connected
to a known network. It is waiting for a connection
with the software on your tablet.
SkyTrak+ is connected to the Application. If the
Ready LED is not turning green quickly, please
check to see if SkyTrak+ is tilted instead of
being level.
SkyTrak+ is ready for your next shot.
SkyTrak+ is charging.
SkyTrak+ is charging, but the power of the
charger is not adequate, it may take a long time
for your SkyTrak+ to charge.
Use this chart to identify or troubleshoot SkyTrak’s various operational modes.
Problem Solution
When charging, ‘Power’
LED does not come on
(AMBER)
Press and hold the Power button for 5 seconds. Make
sure the USB cable has power. Try other ports on your
computer or use a compatible USB wall charger.
SkyTrak+ should be turned OFF to charge.
All 3 LED’s turn red and unit
turns off after 15 seconds
Battery is low. Connect the USB cable and charge the unit.
The Power LED will turn off when SkyTrak+ is fully
charged and ready to go.
‘Wi-Fi’ LED is not turning
green
First, ensure that your SkyTrak+ is connected to the
Wi-Fi network. Then start the SkyTrak software on
your iPad and allow it to load. When the application is
open, SkyTrak’s LEDs will show whether it successfully
connected.
Wi-Fi and Power LEDs are
green, but ‘Ready’ (top)
LED is red
Your SkyTrak+ may have been triggered by a waggle
or other club movement. If you’ll wait a few seconds, it
should turn green again. If it still doesn’t turn green, you
should check your Wi-Fi connection and restart the
application on your iPad.
Results seem inaccurate Be sure to position the ball correctly on the red dot and
make sure the unit sits level with the hitting surface. If
using a tee, make sure the base of the tee is on the red
dot.
Troubleshooting
LED Color Code Chart
10 SKYTRAK+ QUICK START GUIDE 11
WWW.SKYTRAKGOLF.COM
Should this Trouble Shooting Guide not answer your question, please refer to
our Support Center at support.skytrakgolf.com, or you can contact
Customer Support at 1-833-SKYTRAK
Power
LED
Wi-Fi
LED
Ready
LED Description
Battery is low and SkyTrak+ is about to turn itself
off. Please charge your SkyTrak+ as soon as
possible.
SkyTrak+ is in Direct Connect Mode, waiting for
a connection with the SkyTrak Application on
your tablet.
SkyTrak+ is in Network Mode and it is attempting
to locate and connect to a known Wi-Fi network.
SkyTrak+ is in Network Mode and it has located
a known Wi-Fi network. It is attempting to
connect to that network.
SkyTrak+ is in Network Mode and it is connected
to a known network. It is waiting for a connection
with the software on your tablet.
SkyTrak+ is connected to the Application. If the
Ready LED is not turning green quickly, please
check to see if SkyTrak+ is tilted instead of
being level.
SkyTrak+ is ready for your next shot.
SkyTrak+ is charging.
SkyTrak+ is charging, but the power of the
charger is not adequate, it may take a long time
for your SkyTrak+ to charge.
Use this chart to identify or troubleshoot SkyTrak’s various operational modes.
Problem Solution
When charging, ‘Power’
LED does not come on
(AMBER)
Press and hold the Power button for 5 seconds. Make
sure the USB cable has power. Try other ports on your
computer or use a compatible USB wall charger.
SkyTrak+ should be turned OFF to charge.
All 3 LED’s turn red and unit
turns off after 15 seconds
Battery is low. Connect the USB cable and charge the unit.
The Power LED will turn off when SkyTrak+ is fully
charged and ready to go.
‘Wi-Fi’ LED is not turning
green
First, ensure that your SkyTrak+ is connected to the
Wi-Fi network. Then start the SkyTrak software on
your iPad and allow it to load. When the application is
open, SkyTrak’s LEDs will show whether it successfully
connected.
Wi-Fi and Power LEDs are
green, but ‘Ready’ (top)
LED is red
Your SkyTrak+ may have been triggered by a waggle
or other club movement. If you’ll wait a few seconds, it
should turn green again. If it still doesn’t turn green, you
should check your Wi-Fi connection and restart the
application on your iPad.
Results seem inaccurate Be sure to position the ball correctly on the red dot and
make sure the unit sits level with the hitting surface. If
using a tee, make sure the base of the tee is on the red
dot.
Troubleshooting
LED Color Code Chart
10 SKYTRAK+ QUICK START GUIDE 11
WWW.SKYTRAKGOLF.COM
Should this Trouble Shooting Guide not answer your question, please refer to
our Support Center at support.skytrakgolf.com, or you can contact
Customer Support at 1-833-SKYTRAK
SkyTrak+ is in Network Mode and it has
located a known Wi-Fi network. It is attempting
to connect to that network.
Power
LED
Wi-Fi
LED
Ready
LED Description
Battery is low and SkyTrak+ is about to turn itself
off. Please charge your SkyTrak+ as soon as
possible.
SkyTrak+ is in Direct Connect Mode, waiting for
a connection with the SkyTrak Application on
your tablet.
SkyTrak+ is in Network Mode and it is attempting
to locate and connect to a known Wi-Fi network.
SkyTrak+ is in Network Mode and it has located
a known Wi-Fi network. It is attempting to
connect to that network.
SkyTrak+ is in Network Mode and it is connected
to a known network. It is waiting for a connection
with the software on your tablet.
SkyTrak+ is connected to the Application. If the
Ready LED is not turning green quickly, please
check to see if SkyTrak+ is tilted instead of
being level.
SkyTrak+ is ready for your next shot.
SkyTrak+ is charging.
SkyTrak+ is charging, but the power of the
charger is not adequate, it may take a long time
for your SkyTrak+ to charge.
Use this chart to identify or troubleshoot SkyTrak’s various operational modes.
Problem Solution
When charging, ‘Power’
LED does not come on
(AMBER)
Press and hold the Power button for 5 seconds. Make
sure the USB cable has power. Try other ports on your
computer or use a compatible USB wall charger.
SkyTrak+ should be turned OFF to charge.
All 3 LED’s turn red and unit
turns off after 15 seconds
Battery is low. Connect the USB cable and charge the unit.
The Power LED will turn off when SkyTrak+ is fully
charged and ready to go.
‘Wi-Fi’ LED is not turning
green
First, ensure that your SkyTrak+ is connected to the
Wi-Fi network. Then start the SkyTrak software on
your iPad and allow it to load. When the application is
open, SkyTrak’s LEDs will show whether it successfully
connected.
Wi-Fi and Power LEDs are
green, but ‘Ready’ (top)
LED is red
Your SkyTrak+ may have been triggered by a waggle
or other club movement. If you’ll wait a few seconds, it
should turn green again. If it still doesn’t turn green, you
should check your Wi-Fi connection and restart the
application on your iPad.
Results seem inaccurate Be sure to position the ball correctly on the red dot and
make sure the unit sits level with the hitting surface. If
using a tee, make sure the base of the tee is on the red
dot.
Troubleshooting
LED Color Code Chart
10 SKYTRAK+ QUICK START GUIDE 11
WWW.SKYTRAKGOLF.COM
Should this Trouble Shooting Guide not answer your question, please refer to
our Support Center at support.skytrakgolf.com, or you can contact
Customer Support at 1-833-SKYTRAK
Power
LED
Wi-Fi
LED
Ready
LED Description
Battery is low and SkyTrak+ is about to turn itself
off. Please charge your SkyTrak+ as soon as
possible.
SkyTrak+ is in Direct Connect Mode, waiting for
a connection with the SkyTrak Application on
your tablet.
SkyTrak+ is in Network Mode and it is attempting
to locate and connect to a known Wi-Fi network.
SkyTrak+ is in Network Mode and it has located
a known Wi-Fi network. It is attempting to
connect to that network.
SkyTrak+ is in Network Mode and it is connected
to a known network. It is waiting for a connection
with the software on your tablet.
SkyTrak+ is connected to the Application. If the
Ready LED is not turning green quickly, please
check to see if SkyTrak+ is tilted instead of
being level.
SkyTrak+ is ready for your next shot.
SkyTrak+ is charging.
SkyTrak+ is charging, but the power of the
charger is not adequate, it may take a long time
for your SkyTrak+ to charge.
Use this chart to identify or troubleshoot SkyTrak’s various operational modes.
Problem Solution
When charging, ‘Power’
LED does not come on
(AMBER)
Press and hold the Power button for 5 seconds. Make
sure the USB cable has power. Try other ports on your
computer or use a compatible USB wall charger.
SkyTrak+ should be turned OFF to charge.
All 3 LED’s turn red and unit
turns off after 15 seconds
Battery is low. Connect the USB cable and charge the unit.
The Power LED will turn off when SkyTrak+ is fully
charged and ready to go.
‘Wi-Fi’ LED is not turning
green
First, ensure that your SkyTrak+ is connected to the
Wi-Fi network. Then start the SkyTrak software on
your iPad and allow it to load. When the application is
open, SkyTrak’s LEDs will show whether it successfully
connected.
Wi-Fi and Power LEDs are
green, but ‘Ready’ (top)
LED is red
Your SkyTrak+ may have been triggered by a waggle
or other club movement. If you’ll wait a few seconds, it
should turn green again. If it still doesn’t turn green, you
should check your Wi-Fi connection and restart the
application on your iPad.
Results seem inaccurate Be sure to position the ball correctly on the red dot and
make sure the unit sits level with the hitting surface. If
using a tee, make sure the base of the tee is on the red
dot.
Troubleshooting
LED Color Code Chart
10 SKYTRAK+ QUICK START GUIDE 11
WWW.SKYTRAKGOLF.COM
Should this Trouble Shooting Guide not answer your question, please refer to
our Support Center at support.skytrakgolf.com, or you can contact
Customer Support at 1-833-SKYTRAK
Power
LED
Wi-Fi
LED
Ready
LED Description
Battery is low and SkyTrak+ is about to turn itself
off. Please charge your SkyTrak+ as soon as
possible.
SkyTrak+ is in Direct Connect Mode, waiting for
a connection with the SkyTrak Application on
your tablet.
SkyTrak+ is in Network Mode and it is attempting
to locate and connect to a known Wi-Fi network.
SkyTrak+ is in Network Mode and it has located
a known Wi-Fi network. It is attempting to
connect to that network.
SkyTrak+ is in Network Mode and it is connected
to a known network. It is waiting for a connection
with the software on your tablet.
SkyTrak+ is connected to the Application. If the
Ready LED is not turning green quickly, please
check to see if SkyTrak+ is tilted instead of
being level.
SkyTrak+ is ready for your next shot.
SkyTrak+ is charging.
SkyTrak+ is charging, but the power of the
charger is not adequate, it may take a long time
for your SkyTrak+ to charge.
Use this chart to identify or troubleshoot SkyTrak’s various operational modes.
Problem Solution
When charging, ‘Power’
LED does not come on
(AMBER)
Press and hold the Power button for 5 seconds. Make
sure the USB cable has power. Try other ports on your
computer or use a compatible USB wall charger.
SkyTrak+ should be turned OFF to charge.
All 3 LED’s turn red and unit
turns off after 15 seconds
Battery is low. Connect the USB cable and charge the unit.
The Power LED will turn off when SkyTrak+ is fully
charged and ready to go.
‘Wi-Fi’ LED is not turning
green
First, ensure that your SkyTrak+ is connected to the
Wi-Fi network. Then start the SkyTrak software on
your iPad and allow it to load. When the application is
open, SkyTrak’s LEDs will show whether it successfully
connected.
Wi-Fi and Power LEDs are
green, but ‘Ready’ (top)
LED is red
Your SkyTrak+ may have been triggered by a waggle
or other club movement. If you’ll wait a few seconds, it
should turn green again. If it still doesn’t turn green, you
should check your Wi-Fi connection and restart the
application on your iPad.
Results seem inaccurate Be sure to position the ball correctly on the red dot and
make sure the unit sits level with the hitting surface. If
using a tee, make sure the base of the tee is on the red
dot.
Troubleshooting
LED Color Code Chart
10 SKYTRAK+ QUICK START GUIDE 11
WWW.SKYTRAKGOLF.COM
Should this Trouble Shooting Guide not answer your question, please refer to
our Support Center at support.skytrakgolf.com, or you can contact
Customer Support at 1-833-SKYTRAK
SkyTrak+ is searching for a Wi-Fi Network
Power
LED
Wi-Fi
LED
Ready
LED Description
Battery is low and SkyTrak+ is about to turn itself
off. Please charge your SkyTrak+ as soon as
possible.
SkyTrak+ is in Direct Connect Mode, waiting for
a connection with the SkyTrak Application on
your tablet.
SkyTrak+ is in Network Mode and it is attempting
to locate and connect to a known Wi-Fi network.
SkyTrak+ is in Network Mode and it has located
a known Wi-Fi network. It is attempting to
connect to that network.
SkyTrak+ is in Network Mode and it is connected
to a known network. It is waiting for a connection
with the software on your tablet.
SkyTrak+ is connected to the Application. If the
Ready LED is not turning green quickly, please
check to see if SkyTrak+ is tilted instead of
being level.
SkyTrak+ is ready for your next shot.
SkyTrak+ is charging.
SkyTrak+ is charging, but the power of the
charger is not adequate, it may take a long time
for your SkyTrak+ to charge.
Use this chart to identify or troubleshoot SkyTrak’s various operational modes.
Problem Solution
When charging, ‘Power’
LED does not come on
(AMBER)
Press and hold the Power button for 5 seconds. Make
sure the USB cable has power. Try other ports on your
computer or use a compatible USB wall charger.
SkyTrak+ should be turned OFF to charge.
All 3 LED’s turn red and unit
turns off after 15 seconds
Battery is low. Connect the USB cable and charge the unit.
The Power LED will turn off when SkyTrak+ is fully
charged and ready to go.
‘Wi-Fi’ LED is not turning
green
First, ensure that your SkyTrak+ is connected to the
Wi-Fi network. Then start the SkyTrak software on
your iPad and allow it to load. When the application is
open, SkyTrak’s LEDs will show whether it successfully
connected.
Wi-Fi and Power LEDs are
green, but ‘Ready’ (top)
LED is red
Your SkyTrak+ may have been triggered by a waggle
or other club movement. If you’ll wait a few seconds, it
should turn green again. If it still doesn’t turn green, you
should check your Wi-Fi connection and restart the
application on your iPad.
Results seem inaccurate Be sure to position the ball correctly on the red dot and
make sure the unit sits level with the hitting surface. If
using a tee, make sure the base of the tee is on the red
dot.
Troubleshooting
LED Color Code Chart
10 SKYTRAK+ QUICK START GUIDE 11
WWW.SKYTRAKGOLF.COM
Should this Trouble Shooting Guide not answer your question, please refer to
our Support Center at support.skytrakgolf.com, or you can contact
Customer Support at 1-833-SKYTRAK
Power
LED
Wi-Fi
LED
Ready
LED Description
Battery is low and SkyTrak+ is about to turn itself
off. Please charge your SkyTrak+ as soon as
possible.
SkyTrak+ is in Direct Connect Mode, waiting for
a connection with the SkyTrak Application on
your tablet.
SkyTrak+ is in Network Mode and it is attempting
to locate and connect to a known Wi-Fi network.
SkyTrak+ is in Network Mode and it has located
a known Wi-Fi network. It is attempting to
connect to that network.
SkyTrak+ is in Network Mode and it is connected
to a known network. It is waiting for a connection
with the software on your tablet.
SkyTrak+ is connected to the Application. If the
Ready LED is not turning green quickly, please
check to see if SkyTrak+ is tilted instead of
being level.
SkyTrak+ is ready for your next shot.
SkyTrak+ is charging.
SkyTrak+ is charging, but the power of the
charger is not adequate, it may take a long time
for your SkyTrak+ to charge.
Use this chart to identify or troubleshoot SkyTrak’s various operational modes.
Problem Solution
When charging, ‘Power’
LED does not come on
(AMBER)
Press and hold the Power button for 5 seconds. Make
sure the USB cable has power. Try other ports on your
computer or use a compatible USB wall charger.
SkyTrak+ should be turned OFF to charge.
All 3 LED’s turn red and unit
turns off after 15 seconds
Battery is low. Connect the USB cable and charge the unit.
The Power LED will turn off when SkyTrak+ is fully
charged and ready to go.
‘Wi-Fi’ LED is not turning
green
First, ensure that your SkyTrak+ is connected to the
Wi-Fi network. Then start the SkyTrak software on
your iPad and allow it to load. When the application is
open, SkyTrak’s LEDs will show whether it successfully
connected.
Wi-Fi and Power LEDs are
green, but ‘Ready’ (top)
LED is red
Your SkyTrak+ may have been triggered by a waggle
or other club movement. If you’ll wait a few seconds, it
should turn green again. If it still doesn’t turn green, you
should check your Wi-Fi connection and restart the
application on your iPad.
Results seem inaccurate Be sure to position the ball correctly on the red dot and
make sure the unit sits level with the hitting surface. If
using a tee, make sure the base of the tee is on the red
dot.
Troubleshooting
LED Color Code Chart
10 SKYTRAK+ QUICK START GUIDE 11
WWW.SKYTRAKGOLF.COM
Should this Trouble Shooting Guide not answer your question, please refer to
our Support Center at support.skytrakgolf.com, or you can contact
Customer Support at 1-833-SKYTRAK
Power
LED
Wi-Fi
LED
Ready
LED Description
Battery is low and SkyTrak+ is about to turn itself
off. Please charge your SkyTrak+ as soon as
possible.
SkyTrak+ is in Direct Connect Mode, waiting for
a connection with the SkyTrak Application on
your tablet.
SkyTrak+ is in Network Mode and it is attempting
to locate and connect to a known Wi-Fi network.
SkyTrak+ is in Network Mode and it has located
a known Wi-Fi network. It is attempting to
connect to that network.
SkyTrak+ is in Network Mode and it is connected
to a known network. It is waiting for a connection
with the software on your tablet.
SkyTrak+ is connected to the Application. If the
Ready LED is not turning green quickly, please
check to see if SkyTrak+ is tilted instead of
being level.
SkyTrak+ is ready for your next shot.
SkyTrak+ is charging.
SkyTrak+ is charging, but the power of the
charger is not adequate, it may take a long time
for your SkyTrak+ to charge.
Use this chart to identify or troubleshoot SkyTrak’s various operational modes.
Problem Solution
When charging, ‘Power’
LED does not come on
(AMBER)
Press and hold the Power button for 5 seconds. Make
sure the USB cable has power. Try other ports on your
computer or use a compatible USB wall charger.
SkyTrak+ should be turned OFF to charge.
All 3 LED’s turn red and unit
turns off after 15 seconds
Battery is low. Connect the USB cable and charge the unit.
The Power LED will turn off when SkyTrak+ is fully
charged and ready to go.
‘Wi-Fi’ LED is not turning
green
First, ensure that your SkyTrak+ is connected to the
Wi-Fi network. Then start the SkyTrak software on
your iPad and allow it to load. When the application is
open, SkyTrak’s LEDs will show whether it successfully
connected.
Wi-Fi and Power LEDs are
green, but ‘Ready’ (top)
LED is red
Your SkyTrak+ may have been triggered by a waggle
or other club movement. If you’ll wait a few seconds, it
should turn green again. If it still doesn’t turn green, you
should check your Wi-Fi connection and restart the
application on your iPad.
Results seem inaccurate Be sure to position the ball correctly on the red dot and
make sure the unit sits level with the hitting surface. If
using a tee, make sure the base of the tee is on the red
dot.
Troubleshooting
LED Color Code Chart
10 SKYTRAK+ QUICK START GUIDE 11
WWW.SKYTRAKGOLF.COM
Should this Trouble Shooting Guide not answer your question, please refer to
our Support Center at support.skytrakgolf.com, or you can contact
Customer Support at 1-833-SKYTRAK
SkyTrak+ is connected to Wi-Fi and the SkyTrak
application, but is not armed for a shot to be hit.
Power
LED
Wi-Fi
LED
Ready
LED Description
Battery is low and SkyTrak+ is about to turn itself
off. Please charge your SkyTrak+ as soon as
possible.
SkyTrak+ is in Direct Connect Mode, waiting for
a connection with the SkyTrak Application on
your tablet.
SkyTrak+ is in Network Mode and it is attempting
to locate and connect to a known Wi-Fi network.
SkyTrak+ is in Network Mode and it has located
a known Wi-Fi network. It is attempting to
connect to that network.
SkyTrak+ is in Network Mode and it is connected
to a known network. It is waiting for a connection
with the software on your tablet.
SkyTrak+ is connected to the Application. If the
Ready LED is not turning green quickly, please
check to see if SkyTrak+ is tilted instead of
being level.
SkyTrak+ is ready for your next shot.
SkyTrak+ is charging.
SkyTrak+ is charging, but the power of the
charger is not adequate, it may take a long time
for your SkyTrak+ to charge.
Use this chart to identify or troubleshoot SkyTrak’s various operational modes.
Problem Solution
When charging, ‘Power’
LED does not come on
(AMBER)
Press and hold the Power button for 5 seconds. Make
sure the USB cable has power. Try other ports on your
computer or use a compatible USB wall charger.
SkyTrak+ should be turned OFF to charge.
All 3 LED’s turn red and unit
turns off after 15 seconds
Battery is low. Connect the USB cable and charge the unit.
The Power LED will turn off when SkyTrak+ is fully
charged and ready to go.
‘Wi-Fi’ LED is not turning
green
First, ensure that your SkyTrak+ is connected to the
Wi-Fi network. Then start the SkyTrak software on
your iPad and allow it to load. When the application is
open, SkyTrak’s LEDs will show whether it successfully
connected.
Wi-Fi and Power LEDs are
green, but ‘Ready’ (top)
LED is red
Your SkyTrak+ may have been triggered by a waggle
or other club movement. If you’ll wait a few seconds, it
should turn green again. If it still doesn’t turn green, you
should check your Wi-Fi connection and restart the
application on your iPad.
Results seem inaccurate Be sure to position the ball correctly on the red dot and
make sure the unit sits level with the hitting surface. If
using a tee, make sure the base of the tee is on the red
dot.
Troubleshooting
LED Color Code Chart
10 SKYTRAK+ QUICK START GUIDE 11
WWW.SKYTRAKGOLF.COM
Should this Trouble Shooting Guide not answer your question, please refer to
our Support Center at support.skytrakgolf.com, or you can contact
Customer Support at 1-833-SKYTRAK
Power
LED
Wi-Fi
LED
Ready
LED Description
Battery is low and SkyTrak+ is about to turn itself
off. Please charge your SkyTrak+ as soon as
possible.
SkyTrak+ is in Direct Connect Mode, waiting for
a connection with the SkyTrak Application on
your tablet.
SkyTrak+ is in Network Mode and it is attempting
to locate and connect to a known Wi-Fi network.
SkyTrak+ is in Network Mode and it has located
a known Wi-Fi network. It is attempting to
connect to that network.
SkyTrak+ is in Network Mode and it is connected
to a known network. It is waiting for a connection
with the software on your tablet.
SkyTrak+ is connected to the Application. If the
Ready LED is not turning green quickly, please
check to see if SkyTrak+ is tilted instead of
being level.
SkyTrak+ is ready for your next shot.
SkyTrak+ is charging.
SkyTrak+ is charging, but the power of the
charger is not adequate, it may take a long time
for your SkyTrak+ to charge.
Use this chart to identify or troubleshoot SkyTrak’s various operational modes.
Problem Solution
When charging, ‘Power’
LED does not come on
(AMBER)
Press and hold the Power button for 5 seconds. Make
sure the USB cable has power. Try other ports on your
computer or use a compatible USB wall charger.
SkyTrak+ should be turned OFF to charge.
All 3 LED’s turn red and unit
turns off after 15 seconds
Battery is low. Connect the USB cable and charge the unit.
The Power LED will turn off when SkyTrak+ is fully
charged and ready to go.
‘Wi-Fi’ LED is not turning
green
First, ensure that your SkyTrak+ is connected to the
Wi-Fi network. Then start the SkyTrak software on
your iPad and allow it to load. When the application is
open, SkyTrak’s LEDs will show whether it successfully
connected.
Wi-Fi and Power LEDs are
green, but ‘Ready’ (top)
LED is red
Your SkyTrak+ may have been triggered by a waggle
or other club movement. If you’ll wait a few seconds, it
should turn green again. If it still doesn’t turn green, you
should check your Wi-Fi connection and restart the
application on your iPad.
Results seem inaccurate Be sure to position the ball correctly on the red dot and
make sure the unit sits level with the hitting surface. If
using a tee, make sure the base of the tee is on the red
dot.
Troubleshooting
LED Color Code Chart
10 SKYTRAK+ QUICK START GUIDE 11
WWW.SKYTRAKGOLF.COM
Should this Trouble Shooting Guide not answer your question, please refer to
our Support Center at support.skytrakgolf.com, or you can contact
Customer Support at 1-833-SKYTRAK
Power
LED
Wi-Fi
LED
Ready
LED Description
Battery is low and SkyTrak+ is about to turn itself
off. Please charge your SkyTrak+ as soon as
possible.
SkyTrak+ is in Direct Connect Mode, waiting for
a connection with the SkyTrak Application on
your tablet.
SkyTrak+ is in Network Mode and it is attempting
to locate and connect to a known Wi-Fi network.
SkyTrak+ is in Network Mode and it has located
a known Wi-Fi network. It is attempting to
connect to that network.
SkyTrak+ is in Network Mode and it is connected
to a known network. It is waiting for a connection
with the software on your tablet.
SkyTrak+ is connected to the Application. If the
Ready LED is not turning green quickly, please
check to see if SkyTrak+ is tilted instead of
being level.
SkyTrak+ is ready for your next shot.
SkyTrak+ is charging.
SkyTrak+ is charging, but the power of the
charger is not adequate, it may take a long time
for your SkyTrak+ to charge.
Use this chart to identify or troubleshoot SkyTrak’s various operational modes.
Problem Solution
When charging, ‘Power’
LED does not come on
(AMBER)
Press and hold the Power button for 5 seconds. Make
sure the USB cable has power. Try other ports on your
computer or use a compatible USB wall charger.
SkyTrak+ should be turned OFF to charge.
All 3 LED’s turn red and unit
turns off after 15 seconds
Battery is low. Connect the USB cable and charge the unit.
The Power LED will turn off when SkyTrak+ is fully
charged and ready to go.
‘Wi-Fi’ LED is not turning
green
First, ensure that your SkyTrak+ is connected to the
Wi-Fi network. Then start the SkyTrak software on
your iPad and allow it to load. When the application is
open, SkyTrak’s LEDs will show whether it successfully
connected.
Wi-Fi and Power LEDs are
green, but ‘Ready’ (top)
LED is red
Your SkyTrak+ may have been triggered by a waggle
or other club movement. If you’ll wait a few seconds, it
should turn green again. If it still doesn’t turn green, you
should check your Wi-Fi connection and restart the
application on your iPad.
Results seem inaccurate Be sure to position the ball correctly on the red dot and
make sure the unit sits level with the hitting surface. If
using a tee, make sure the base of the tee is on the red
dot.
Troubleshooting
LED Color Code Chart
10 SKYTRAK+ QUICK START GUIDE 11
WWW.SKYTRAKGOLF.COM
Should this Trouble Shooting Guide not answer your question, please refer to
our Support Center at support.skytrakgolf.com, or you can contact
Customer Support at 1-833-SKYTRAK
You are cleared to hit a shot on your SkyTrak+
Power
LED
Wi-Fi
LED
Ready
LED Description
Battery is low and SkyTrak+ is about to turn itself
off. Please charge your SkyTrak+ as soon as
possible.
SkyTrak+ is in Direct Connect Mode, waiting for
a connection with the SkyTrak Application on
your tablet.
SkyTrak+ is in Network Mode and it is attempting
to locate and connect to a known Wi-Fi network.
SkyTrak+ is in Network Mode and it has located
a known Wi-Fi network. It is attempting to
connect to that network.
SkyTrak+ is in Network Mode and it is connected
to a known network. It is waiting for a connection
with the software on your tablet.
SkyTrak+ is connected to the Application. If the
Ready LED is not turning green quickly, please
check to see if SkyTrak+ is tilted instead of
being level.
SkyTrak+ is ready for your next shot.
SkyTrak+ is charging.
SkyTrak+ is charging, but the power of the
charger is not adequate, it may take a long time
for your SkyTrak+ to charge.
Use this chart to identify or troubleshoot SkyTrak’s various operational modes.
Problem Solution
When charging, ‘Power’
LED does not come on
(AMBER)
Press and hold the Power button for 5 seconds. Make
sure the USB cable has power. Try other ports on your
computer or use a compatible USB wall charger.
SkyTrak+ should be turned OFF to charge.
All 3 LED’s turn red and unit
turns off after 15 seconds
Battery is low. Connect the USB cable and charge the unit.
The Power LED will turn off when SkyTrak+ is fully
charged and ready to go.
‘Wi-Fi’ LED is not turning
green
First, ensure that your SkyTrak+ is connected to the
Wi-Fi network. Then start the SkyTrak software on
your iPad and allow it to load. When the application is
open, SkyTrak’s LEDs will show whether it successfully
connected.
Wi-Fi and Power LEDs are
green, but ‘Ready’ (top)
LED is red
Your SkyTrak+ may have been triggered by a waggle
or other club movement. If you’ll wait a few seconds, it
should turn green again. If it still doesn’t turn green, you
should check your Wi-Fi connection and restart the
application on your iPad.
Results seem inaccurate Be sure to position the ball correctly on the red dot and
make sure the unit sits level with the hitting surface. If
using a tee, make sure the base of the tee is on the red
dot.
Troubleshooting
LED Color Code Chart
10 SKYTRAK+ QUICK START GUIDE 11
WWW.SKYTRAKGOLF.COM
Should this Trouble Shooting Guide not answer your question, please refer to
our Support Center at support.skytrakgolf.com, or you can contact
Customer Support at 1-833-SKYTRAK
Power
LED
Wi-Fi
LED
Ready
LED Description
Battery is low and SkyTrak+ is about to turn itself
off. Please charge your SkyTrak+ as soon as
possible.
SkyTrak+ is in Direct Connect Mode, waiting for
a connection with the SkyTrak Application on
your tablet.
SkyTrak+ is in Network Mode and it is attempting
to locate and connect to a known Wi-Fi network.
SkyTrak+ is in Network Mode and it has located
a known Wi-Fi network. It is attempting to
connect to that network.
SkyTrak+ is in Network Mode and it is connected
to a known network. It is waiting for a connection
with the software on your tablet.
SkyTrak+ is connected to the Application. If the
Ready LED is not turning green quickly, please
check to see if SkyTrak+ is tilted instead of
being level.
SkyTrak+ is ready for your next shot.
SkyTrak+ is charging.
SkyTrak+ is charging, but the power of the
charger is not adequate, it may take a long time
for your SkyTrak+ to charge.
Use this chart to identify or troubleshoot SkyTrak’s various operational modes.
Problem Solution
When charging, ‘Power’
LED does not come on
(AMBER)
Press and hold the Power button for 5 seconds. Make
sure the USB cable has power. Try other ports on your
computer or use a compatible USB wall charger.
SkyTrak+ should be turned OFF to charge.
All 3 LED’s turn red and unit
turns off after 15 seconds
Battery is low. Connect the USB cable and charge the unit.
The Power LED will turn off when SkyTrak+ is fully
charged and ready to go.
‘Wi-Fi’ LED is not turning
green
First, ensure that your SkyTrak+ is connected to the
Wi-Fi network. Then start the SkyTrak software on
your iPad and allow it to load. When the application is
open, SkyTrak’s LEDs will show whether it successfully
connected.
Wi-Fi and Power LEDs are
green, but ‘Ready’ (top)
LED is red
Your SkyTrak+ may have been triggered by a waggle
or other club movement. If you’ll wait a few seconds, it
should turn green again. If it still doesn’t turn green, you
should check your Wi-Fi connection and restart the
application on your iPad.
Results seem inaccurate Be sure to position the ball correctly on the red dot and
make sure the unit sits level with the hitting surface. If
using a tee, make sure the base of the tee is on the red
dot.
Troubleshooting
LED Color Code Chart
10 SKYTRAK+ QUICK START GUIDE 11
WWW.SKYTRAKGOLF.COM
Should this Trouble Shooting Guide not answer your question, please refer to
our Support Center at support.skytrakgolf.com, or you can contact
Customer Support at 1-833-SKYTRAK
Power
LED
Wi-Fi
LED
Ready
LED Description
Battery is low and SkyTrak+ is about to turn itself
off. Please charge your SkyTrak+ as soon as
possible.
SkyTrak+ is in Direct Connect Mode, waiting for
a connection with the SkyTrak Application on
your tablet.
SkyTrak+ is in Network Mode and it is attempting
to locate and connect to a known Wi-Fi network.
SkyTrak+ is in Network Mode and it has located
a known Wi-Fi network. It is attempting to
connect to that network.
SkyTrak+ is in Network Mode and it is connected
to a known network. It is waiting for a connection
with the software on your tablet.
SkyTrak+ is connected to the Application. If the
Ready LED is not turning green quickly, please
check to see if SkyTrak+ is tilted instead of
being level.
SkyTrak+ is ready for your next shot.
SkyTrak+ is charging.
SkyTrak+ is charging, but the power of the
charger is not adequate, it may take a long time
for your SkyTrak+ to charge.
Use this chart to identify or troubleshoot SkyTrak’s various operational modes.
Problem Solution
When charging, ‘Power’
LED does not come on
(AMBER)
Press and hold the Power button for 5 seconds. Make
sure the USB cable has power. Try other ports on your
computer or use a compatible USB wall charger.
SkyTrak+ should be turned OFF to charge.
All 3 LED’s turn red and unit
turns off after 15 seconds
Battery is low. Connect the USB cable and charge the unit.
The Power LED will turn off when SkyTrak+ is fully
charged and ready to go.
‘Wi-Fi’ LED is not turning
green
First, ensure that your SkyTrak+ is connected to the
Wi-Fi network. Then start the SkyTrak software on
your iPad and allow it to load. When the application is
open, SkyTrak’s LEDs will show whether it successfully
connected.
Wi-Fi and Power LEDs are
green, but ‘Ready’ (top)
LED is red
Your SkyTrak+ may have been triggered by a waggle
or other club movement. If you’ll wait a few seconds, it
should turn green again. If it still doesn’t turn green, you
should check your Wi-Fi connection and restart the
application on your iPad.
Results seem inaccurate Be sure to position the ball correctly on the red dot and
make sure the unit sits level with the hitting surface. If
using a tee, make sure the base of the tee is on the red
dot.
Troubleshooting
LED Color Code Chart
10 SKYTRAK+ QUICK START GUIDE 11
WWW.SKYTRAKGOLF.COM
Should this Trouble Shooting Guide not answer your question, please refer to
our Support Center at support.skytrakgolf.com, or you can contact
Customer Support at 1-833-SKYTRAK
SkyTrak+ is capturing the shot that was just hit
Power
LED
Wi-Fi
LED
Ready
LED Description
Battery is low and SkyTrak+ is about to turn itself
off. Please charge your SkyTrak+ as soon as
possible.
SkyTrak+ is in Direct Connect Mode, waiting for
a connection with the SkyTrak Application on
your tablet.
SkyTrak+ is in Network Mode and it is attempting
to locate and connect to a known Wi-Fi network.
SkyTrak+ is in Network Mode and it has located
a known Wi-Fi network. It is attempting to
connect to that network.
SkyTrak+ is in Network Mode and it is connected
to a known network. It is waiting for a connection
with the software on your tablet.
SkyTrak+ is connected to the Application. If the
Ready LED is not turning green quickly, please
check to see if SkyTrak+ is tilted instead of
being level.
SkyTrak+ is ready for your next shot.
SkyTrak+ is charging.
SkyTrak+ is charging, but the power of the
charger is not adequate, it may take a long time
for your SkyTrak+ to charge.
Use this chart to identify or troubleshoot SkyTrak’s various operational modes.
Problem Solution
When charging, ‘Power’
LED does not come on
(AMBER)
Press and hold the Power button for 5 seconds. Make
sure the USB cable has power. Try other ports on your
computer or use a compatible USB wall charger.
SkyTrak+ should be turned OFF to charge.
All 3 LED’s turn red and unit
turns off after 15 seconds
Battery is low. Connect the USB cable and charge the unit.
The Power LED will turn off when SkyTrak+ is fully
charged and ready to go.
‘Wi-Fi’ LED is not turning
green
First, ensure that your SkyTrak+ is connected to the
Wi-Fi network. Then start the SkyTrak software on
your iPad and allow it to load. When the application is
open, SkyTrak’s LEDs will show whether it successfully
connected.
Wi-Fi and Power LEDs are
green, but ‘Ready’ (top)
LED is red
Your SkyTrak+ may have been triggered by a waggle
or other club movement. If you’ll wait a few seconds, it
should turn green again. If it still doesn’t turn green, you
should check your Wi-Fi connection and restart the
application on your iPad.
Results seem inaccurate Be sure to position the ball correctly on the red dot and
make sure the unit sits level with the hitting surface. If
using a tee, make sure the base of the tee is on the red
dot.
Troubleshooting
LED Color Code Chart
10 SKYTRAK+ QUICK START GUIDE 11
WWW.SKYTRAKGOLF.COM
Should this Trouble Shooting Guide not answer your question, please refer to
our Support Center at support.skytrakgolf.com, or you can contact
Customer Support at 1-833-SKYTRAK
Power
LED
Wi-Fi
LED
Ready
LED Description
Battery is low and SkyTrak+ is about to turn itself
off. Please charge your SkyTrak+ as soon as
possible.
SkyTrak+ is in Direct Connect Mode, waiting for
a connection with the SkyTrak Application on
your tablet.
SkyTrak+ is in Network Mode and it is attempting
to locate and connect to a known Wi-Fi network.
SkyTrak+ is in Network Mode and it has located
a known Wi-Fi network. It is attempting to
connect to that network.
SkyTrak+ is in Network Mode and it is connected
to a known network. It is waiting for a connection
with the software on your tablet.
SkyTrak+ is connected to the Application. If the
Ready LED is not turning green quickly, please
check to see if SkyTrak+ is tilted instead of
being level.
SkyTrak+ is ready for your next shot.
SkyTrak+ is charging.
SkyTrak+ is charging, but the power of the
charger is not adequate, it may take a long time
for your SkyTrak+ to charge.
Use this chart to identify or troubleshoot SkyTrak’s various operational modes.
Problem Solution
When charging, ‘Power’
LED does not come on
(AMBER)
Press and hold the Power button for 5 seconds. Make
sure the USB cable has power. Try other ports on your
computer or use a compatible USB wall charger.
SkyTrak+ should be turned OFF to charge.
All 3 LED’s turn red and unit
turns off after 15 seconds
Battery is low. Connect the USB cable and charge the unit.
The Power LED will turn off when SkyTrak+ is fully
charged and ready to go.
‘Wi-Fi’ LED is not turning
green
First, ensure that your SkyTrak+ is connected to the
Wi-Fi network. Then start the SkyTrak software on
your iPad and allow it to load. When the application is
open, SkyTrak’s LEDs will show whether it successfully
connected.
Wi-Fi and Power LEDs are
green, but ‘Ready’ (top)
LED is red
Your SkyTrak+ may have been triggered by a waggle
or other club movement. If you’ll wait a few seconds, it
should turn green again. If it still doesn’t turn green, you
should check your Wi-Fi connection and restart the
application on your iPad.
Results seem inaccurate Be sure to position the ball correctly on the red dot and
make sure the unit sits level with the hitting surface. If
using a tee, make sure the base of the tee is on the red
dot.
Troubleshooting
LED Color Code Chart
10 SKYTRAK+ QUICK START GUIDE
11
WWW.SKYTRAKGOLF.COM
Should this Trouble Shooting Guide not answer your question, please refer to
our Support Center at support.skytrakgolf.com, or you can contact
Customer Support at 1-833-SKYTRAK
First, ensure that your SlyTrak+is connectd to the
Wi-Fi network. Then start the SkyTrak software on
your connecting device and allow it to load. When
the application is open, SkyTrak’s LEDs will show
whether it successfully connected.
Be sure to position th ball correctly on the red dot
and make sure the unit sits level with the hitting
surface. If using a tee, make sure the base of the
tee is on the red dot or up to 3” behind the red dot.
©2022 SkyTrak, LLC. All Rights Reserved.
SkyTrak™ is a trademark owned by GOLFTEC ST LLC d/b/a
("GTST"). iPad, and Apple® App Store are trademarks of
Apple, Inc, registered in US and other countries. Other
trademarks and trade names are those of their respective
owners. Use of marks not owned by SkyTrak is under license.
All content within this Guide is copyrighted by SkyTrak and
may not be reprinted without permission. The content of this
Guide is furnished for informational use only, is subject to
change without notice, and should not be construed as a
commitment by SkyTrak. SkyTrak assumes no responsibility
or liability for any errors or inaccuracies that may appear in the
informational content contained in this Guide.
Powered by:
Other manuals for Skytrak+
1
This manual suits for next models
1
Table of contents
Other GOLFTEC Sport & Outdoor manuals
Popular Sport & Outdoor manuals by other brands
TEUFELBERGER
TEUFELBERGER equaLIZA Manufacturer's information and instructions for use
Haspo
Haspo 103 Assembly instruction
Hudora
Hudora 44620-22 INSTRUCTIONS ON ASSEMBLY AND USE
S.R.Smith
S.R.Smith River Run Slide 19A Assembly/installation instructions
Spralla
Spralla 18667 user manual
Advance acoustic
Advance acoustic STRAPLESS 2 manual
