Good Way USB to Parallel Bi-Directional Cable AP1305 User manual

3F, No.135, Lane 235 Pau Chiao Rd., Hsin Tien, Taipei County, Taiwan
Tel: [phone]
Fax: [phone]~1
http://www.goodway.com.tw
E-mail:[e-mail]
The USB to Parallel Bi-Directional Cable allows your PC to print to most parallel printer device connected through the USB port. Just plug the
USB connector of the cable into the USB port of your PC and the other end into the Centronics connector of the parallel printer. The device's
USB (Universal Serial Bus) interface provides up to 12Mbps data throughput, so printing is much faster compared when connected to standard
parallel port (150kbs). The USB-to-Parallel cable also provides true plug-and-play and hot-plug capability – simply plug in the cable under the
Windows operating system and the cable will be instantly detected.
Specifications
Features
 Single chip (ASIC) USB to Parallel communication
 Windows 98SE Driver Support
 Universal Serial Bus Specification Rev. 1.1 compliant
 USB full speed communication and bus powered
 USB Printer Class Specification 1.0 compliant
 IEEE-1284 36 pin male with Ferrite core
 IEEE-1284 1994 (Bi-directional parallel interface)
specification compliant
 Cable length: 2 meters
PC Interface USB 1.1 compliant A type male connector
Parallel Connector IEEE 1284 bi-directional DB36 male connector
Specification Support zUSB Printer Class Specification 1.0
compliant
zIEEE-1284 1994 (bi-directional parallel
interface) specification compliant
Buffer Size zUnified 512-byte buffer
zDynamically allocated for upstream and
downstream data flow
Regulations CE, FCC
Input Pins Voltage Level 5V tolerant
Printer Computer
Compatibale with USB-enabled
Desktop PC or Notebook
Application
 Intel-compatible 486DX-66 MHz CPU or higher
 One Standard USB Port
 Windows 98SE, ME, 2000 or XP
 USB to Parallel Bi-Directional Cable
 Driver Installation CD
 Quick Installation Guide
System Requirements
Package Content