Goodmans GTVL26W17HDF User manual

GTVL26W17HDF
ATV/DTV
CH.
VOL .
EXIT
INFO/i INPUT
GUI DECH. L IST
FAS T TEXT
MEN U
1
4
78 9
0
56
23
S.MODE P.MODE
P.SIZE
POSITION WINDOW SWAP PIP/POP
SUBTITLE
FRE EZE
SLEEP
PIP
TEX T

1
LCD TV User Guide
Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire or electric shock, do not expose this
equipment to rain or moisture.
This symbol is intended to alert the user to avoid the risk of
electric shock, do not disassemble this equipment by anyone
except a qualified service personnel.
This symbol is intended to alert the user to the presence
of important operating and maintenance instructions
in the literature accompanying the appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION: TO AVOID THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
WARNING
CAUTION

2LCD TV User Guide
Safety Instructions
MAINS PLUG WIRING
Electrical Information
This appliance is fitted with a BS1363/A 13 amp plug. If it is not suitable for your
supply sockets it must be removed and replaced with an appropriate plug. If the plug
becomes damaged and/or needs to be replaced please follow the wiring instructions
below. The plug removed must be disposed of immediately. It must not be plugged
into a supply socket as this will be an electrical hazard. If the fuse needs to be
replaced it must be of the same rating and ASTA approved to BS1362. If the plug is
changed, a fuse of the appropriate rating must be fitted in the plug, adapter or at the
distribution board. If the fuse in a moulded plug is replaced, the fuse cover must be
refitted before the appliance can be used.
Wiring Instructions
The supply cable will be either 2-core or 3-core. Follow the appropriate wiring
instructions given below. In both cases ensure that the outer sheath of the cable is
firmly held by the cable clamp.
WARNING! Do not connect either wire to
the earth terminal.
This symbol indicates that this 2-core appliance
is Class II and does not require an earth
connection.
2- CORE
BLUE
(Neutral)
Cable
clamp
BROWN
(Live)
Fuse
The wire coloured blue must be connected to
the terminal marked with the letter N or
coloured black.
The wire coloured brown must be connected to
the terminal marked with the letter L or
coloured red.
WARNING! This appliance must be earthed.
The wire coloured green and yellow must be
connected to the terminal marked with the letter
E, or by the earth symbol, , or coloured green or
green and yellow.
The wire coloured blue must be connected to the
terminal marked with the letter N or coloured
black.
The wire coloured brown must be connected to
the terminal marked with the letter L or coloured
red.
3- CORE
BLUE
(Neutral)
Cable
clamp
BROWN
(Live)
Fuse
GREEN and
YELLOW
(Earth)

3
LCD TV User Guide
Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS
To prevent any injuries, the following safety precautions should be observed in the
installation, use, servicing and maintenance of this equipment.
Before operating this equipment, please read this manual completely, and keep it
nearby for future reference.
■Do not place the equipment on any uneven or unstable carts, stands, tables, shelves etc. The
equipment may fall, causing serious injury to children or adults and serious damage to the
equipment itself.
■Use only a cart or stand recommended by the manufacturer.
This equipment and recommended cart or stand should be handled with care. Quick stops,
excessive force, and uneven surfaces may cause the equipment and cart/stand to overturn.
■Do not disable the 3-wire grounding type plug. The grounding pin on the 3-prong plug is an
important feature. Removing the grounding pin will increase the risk of damaging the
equipment. If you can not fit the plug into the electrical outlet, contact an electrician to install
a grounding outlet.
■Always operate this equipment from the type of power source indicated on the rear of the
serial/model plate.
■Never overload wall outlets and extensions.
■Use and handle the power cord with care.
■Do not place any heavy objects on the AC power cord.
■Do not pull the AC power cord. Do not handle the AC power cord with a wet hand.
■Do not touch the power cord and antenna cable during lightning.
■Remove the plug from the wall outlet, if the equipment will not be used for a long period of
time.
■Do not expose the equipment to extreme temperature or to direct sunlight, as the equipment
may heat up and suffer damage.
■Do not install the equipment near any heat sources such as radiators, heat registers, stoves,
or any other apparatus that might produce heat.
■Do not attempt to service the equipment yourself.
■Opening and removing the covers may expose you to dangerous voltage or other hazards and
may void your warranty. Refer service to qualified personnel.
■Do not place or drop any other objects on top.
■Do not insert anything into the ventilation holes of your equipment. Inserting any metal or
flammable objects may result to fire or electric shock.

4LCD TV User Guide
Safety Instructions
WARNINGS
WEEE:
This appliance is labelled in accordance with European Directive 2002/96/EG
concerning used electrical and electronic appliances(waste electrical and electronic
equipment - WEEE). The guideline determines the framework for the return and
recycling of used appliances as applicable throughout the EU.
●Unqualified attempts to repair this TV are not allowed. Refer repairs to this unit
to a qualified technician only.
●Do not disassemble this unit. There are dangerous-voltage parts inside that may
cause electric shock even after power is disconnected.
●Store your unit in a clean, dry environment, Unplug the unit immediately it gets
wet, and consult your servicing technician.
●Always unplug the unit before cleaning it. Wipe dust off the cabinet of the unit
with clean &dry &soft cloth. Apply non-ammonia cleansing lotion onto the cloth,
not directly onto the screen.
●Do not place heavy objects on top of the unit.
●Avoid exposing your unit directly to sunlight or other heat sources.
●Put your unit in a well-ventilated area away from high humidity.
●Do not expose this TV to rain or moisture, dripping or splashing.
Safety Tips
●If smoke, abnormal noise or odour comes out of your unit, unplug from the
mains supply immediately and call your dealer.
●Never try to repair the your unit on your own. Always call your dealer
for repairs.
Note
This user’s manual contains for-reference-only graphics and information that are
subject to change without notice.

5
LCD TV User Guide
CONTENT
CONTENT
PREPARATION .............................................................................................................. 6
Features ............................................................................................................................................................... 6
Package Contents ............................................................................................................................................... 7
LCD TV .................................................................................................................................................................. 8
Front /Side View ..................................................................................................................................................... 8
Rear View .............................................................................................................................................................. 9
Remote Control ....................................................................................................................................................... 10
Setting up your LCD TV........................................................................................................................................... 13
INSTALLATION ........................................................................................................... 15
Connecting a TV Cable or Aerial......................................................................................................................... 15
Basic Operation................................................................................................................................................. 15
Connecting a DVD Player .................................................................................................................................. 17
Connecting a VCR& a Video Camera .............................................................................................................. 18
Connecting a TV Box and Satellite Receiver ..................................................................................................... 19
Connecting an Audio Receiver.......................................................................................................................... 20
Connecting a HDMI source .............................................................................................................................. 21
HDMI...............................................................................................................................22
USING THE FEATURES................................................................................................. 23
Wide Screen Viewing............................................................................................................................................ 23
Using the Picture in Picture................................................................................................................................... 25
OSD Menu Operation .......................................................................................................................................... 27
Video .................................................................................................................................................................. 27
Audio.................................................................................................................................................................... 28
Setup.................................................................................................................................................................... 29
Preferences........................................................................................................................................................... 30
Screen................................................................................................................................................................... 30
USING THE DTV FEATURES............................................................................................ 31
TROUBLESHOOTING...................................................................................................... 40
SPECIFICATIONS............................................................................................................. 41

6
PREPARATION
PREPARATION
Features
PREPARATION
VGA Support:
Multimedia socket
VIDEO in socket
S-VIDEO in socket
SCART 1 socket (RGB,CVBS,Y/C input;CVBS output)
SCART 2 socket (Y/C,CVBS input)
Y Pb Pr in socket
VGA in socket
HDMI 1 / HDMI 2 in socket
Features
High Brightness / Contrast Image
Brightness: 500 cd/m2
Contrast Ratio: 800:1
640x480/60Hz~1024x768/75Hz
NICAM/ FM-Stereo Function
Auto Programme Sort (APS)
Manual search
Sleep-Timer
User selectable colour temperature settings
Built-in ATV and DTV Tuners
WSS (Wide Screen Scale ) Function
This function can automatically convert and display any aspect ration (4:3 / Wide) TV
broadcast signal.
Teletext Function
The built-in DTV tuner allows the reception of DVB-T broadcasting without
the addition of a set-top box.
PIP/POP Function
This function allows viewing of video from two different sources simultaneously.

7
PREPARATION
PREPARATION
*Most devices (VCRs, DVD player, etc.) come with the necessary
cable for connection. If you want to set up a complex system, you may need to buy
extra cable, connector, etc.
Package Contents
Once you open the box, make sure all of the following contents are
included.If you’re missing any items, please contact your dealer.
These items are all you need to set up and operate the LCD TV
in its basic configuration.
LCD TV
Audio Cable
User Guide
(you are reading it)
Power Cord
Remote control/
AAA batteries
Video Cable
ATV/DTV
CH.
VOL.
EXIT
INFO/ i INPUT
GUIDECH. LIS T
FAST TEXT
MENU
1
4
789
0
56
23
S.MOD E P.MODE
P.SIZE
POSITION WINDOW S WAP PIP/POP
SUBTITLE
FREEZE
SLEEP
PIP
TEXT
Stand
Screws (6)/
Screwdriver
QUICK START GUIDE
QUICK START GUIDE

8
PREPARATION
PREPARATION
LCD TV
LED
The LED light indicates when the LCD TV is
activated.
IR
Infrared
Receiver
Front/Right Side View and Controls
MENU
Press once to display the OSD (on screen
display), press again to turn the OSD off.
VOLUME+/-
Adjusts the volume up and down.
Selects the main-menu item and change
values for items when in the OSD mode.
CHANNEL▲▼
Scans up and down through channels.
Selects sub-menu item when in the OSD
mode.
INPUT
Chooses from different input signal sources.
Turns the LCD TV on and into standby mode.
L
R
VIDEO
AUDIO IN
EARPHONE
Connect headphones for
private listening. Note main
speakers will be muted when
headphones are connected.
VIDEO IN
Connects to the
composite Video and
Audio output sockets on
external video equipment.

9
PREPARATION
PREPARATION
LCD TV
DIGITAL OUT
Connects to digital out socket on external digital audio equipment.
VGA(AV6)
Connects the PC, or other AV equipment with VGA and PC AUDIO IN output sockets.
YPbPr(AV5)
Connects to the DVD player, Digital Set-Top-Box, or other AV equipment
with component(YPbPr) video and audio output sockets.
VIDEO(AV3)
Connects to the composite VIDEO and AUDIO
(L/R) output sockets on external video equipment.
HDMI 1(AV7)/HDMI2(AV8)
Connects the all digital AV equipment with HDMI 1/HDMI2 connector.
HDMI supports enhanced, high-definition video.
S-VIDEO (AV4)
Connects to the S-VIDEO and AUDIO(L/R) output sockets on external video equipment.
SCART1(AV1)
Connects to external AV equipment with a SCART
socket.The SCART1 interface offers multiple signals
(Y/C ,CVBS,RGB) with audio input and CVBS output
between the T V and external video equipment .
ANT IN
Connect TV aerial here.
Rear View
SCART(AV2)
Connects to AV equipment with a SCART socket.The SCART2 inter face offers Y/C
and CVBS signals with audio input between the T V and external video
equipment .
Mains power switch Mains power socket

10
PREPARATION
PREPARATION
Remote Control
POWER
Turns the LCD TV on and into standby mode .
Mutes the TV sound.
ATV/DTV
Pressing enter ATV (analogue) or DTV (Digital )
Mode.
0-9
Select and switch to a channel by
using 0-9 buttons.
SUBTITLE
Press the SUBTITLE key to display the subtitle
which is broadcast with the program on the
screen.
CH. +/-
Changes the channels up and down .
VOL. +/-
Increases and decreases volume.
SLEEP
Sets the LCD TV sleep time.
- Press the SLEEP button to select the number of
minutes. followed by 15, 30, 60minutes and off.
The timer begins to count down from the number
of minutes selected.
a.To check the remaining sleep time, press the
SLEEP button once.
b.To cancel the sleep time, repeatedly press the
SLEEP button until the display off appears.
c. If you turn the set off after setting the sleep
timer, the setting will be erased.
PIP/POP
Turns on and off the PIP/POP (4:3/ FULL)
function.
SWAP
Press to switch the picture between the main
window and the sub window.
picture between the left
POSITION
Select the position of the sub window.
WINDOW
Press to activate either the main
menu or submenu.
1
2
3
4
5
6
7
8
9
10
11
13
12
14
P.SIZE
Selects from the following modes
settings: 16:9,14:9, 4:3, Zoom ,Original.
ATV/DTV
CH.
VOL.
EXIT
INFO/i INPUT
GUIDECH. LIST
FAST TEXT
MENU
1
4
789
0
56
23
S.MODE P.MODE
P.SIZE
POSITION WINDOW SWAP PIP/POP
SUBTITLE
FREEZE
SLEEP
PIP
TEXT
14
12
11
9
8
5
2
3
1
4
7
10
13
6
EXIT
Exits the OSD menu (on-screen display).
S.MODE
Selects sound mode: Movie, Music,
Individual, Neutral.
P.MODE
Selects picture mode: Custom,
Standard, Vivid, Mild.

11
PREPARATION
PREPARATION
Remote Control
21
20
18
17
16
15
Pressing once displays a variety of information such
as the current channel and the input source.
INPUT
Cycles among the different input signal sources.
ATV/DTV
CH.
VOL.
EXIT
INFO/i INPUT
GUIDECH. LIST
FAST TEXT
MENU
1
4
789
0
56
23
S.MODE P.MODE
P.SIZE
POSITION WINDOW SWAP PIP/POP
SUBTITLE
FREEZE
SLEEP
PIP
TEXT
INFO/i
Accesses the TELETEXT items or
corresponding pages.
The coloured buttons are are used
to access interactive modes when
using Digital / Freeview TV
channels.
Allows you to exit the Subtitle
andenter the MHEG(The program
include the Sub / MHEG)on the DTV
Source.
21
/TEXT
Turns on and off the Teletext function.
Enter the MHEG on the DTV Source.
CH. LIST
Display all channel list &name.
GUIDE
In DTV mode,pressing GUIDE key displays
the electronic program guide on the screen.
FREEZE
Freezes and restores the picture.
19

12
PREPARATION
PREPARATION
2
3
1
Installing the batteries in your remote control
Pull the tab of the back cover and pull up on
the cover to open the battery compartment
of the remote control.
Insert two A A A size batteries.
Make sure to match the (+) and (-) ends of
the batteries with the (+) and (-) ends indicated
in the battery compar tment.
Align the lower tabs of the back cover to the
remote control and squeeze the cover into
place.
Do not use caustic cleaners( porcelain, stainless steel, toilet, or oven cleaner, etc...).
You may cause damage to your remote control.
Your remote control can be activated from up to the LCD TV 5m away,
if points directly in front of the device.
Effective range
Note :
Remote Control Setting Up Your LCD TV
5M
30O 30O

13
PREPARATION
PREPARATION
How to install the TV Stand
Setting Up Your LCD TV
Follow the instructions below to install the TV stand:
Open the box, and make sure all necessary parts are in the box.
The package contains:
LCD TV Stand Screws (6)/
Screwdriver
Lay a soft cloth on a table to protect against scratching the table or TV panel. Place the
LCD TV unit face-down on the cloth.

14
PREPARATION
PREPARATION
If you prefer to mount your LCD TV on a wall instead of attaching it to the stand,
please refer to the instructions included in the wall mounting kit
(wall mounting kit not supplied).
Hold the TV stand and place it on the six screw holes on the back of the unit as shown.
Use the screwdriver to tighten the six screws on the rear of the speaker until the screw is
firmly fixed in place.
completed

15
INSTALLATION
INSTALLATION
Basic Operation
Tuning in the TV channels
1 After connecting an aerial to your LCD TV and connecting the mains cable to the TV and
230VAC mains socket, turn the POWER SWITCH of rear TV on, a red light will show on the
front centre panel of the TV.
2Press the POWER button, the red light will change to green and the First Time Installation
screen will show:
1. Make sure an aerial is fitted then press OK button on the remote to start
the Auto Programme Scan (APS).
2. In a short while you will see the TV programmes briefly as each channel is received and
stored in the memory. When APS is completed BBC1 digital TV will show, press CH+/-
buttons to view the other channels stored. To view analogue TV press INPUT button and
use the up / down arrow buttons to select TV and then Press the OK button.
Change channels by pressing the CH +/- buttons.
3To power off press the POWER button, the green light will change to red.
INSTALLATION
Refer to the user guide of the external equipment to be connected.When connecting
external equipment, do not connect any AC power cords to wall outlets until you have completed
all the connections.
Basic Connection: Connecting aerial .
TV Aerial
Aerial/75-ohm
coaxial input
connect the supplied mains
cable to this socket.
ANT IN
ANT IN
Make sure the power switch is
switched off
Unplug from
a wall outlet

16 INSTALLATION
INSTALLATION
Selecting a Source
Press the INPUT button to display the function required (TV/AV).
Using the arrow buttons on the remote highlight the function required and press the OK
button to select the function.
Select TV Channel
1 Press the CH.+/- button on the remote control and the CH. ▲/▼ button on the LCD
TV to change the TV channels.
2 You can directly select the TV channel required by pressing 1,2 or 3 etc on the remote button pad.
Adjusting the Volume
Press the VOL. +/– button on the remote control or the VOL. +/- button on the LCD TV to
adjust the volume.
To Mute the Sound
1 Press MUTE and the sound cuts off.
2 To turn mute off, press the MUTE button again, or simply press the VOL +/- button.
Sleep Timer
Press the SLEEP button continuously to select the sleep timer or turn the sleep timer from the
OFF,15,30,60minutes; when the LCD TV has reached the set time, it will automatically turn off.
If the TV has no input signal, it will automatically power down to standby after 15 minutes.

17
INSTALLATION
INSTALLATION
Connecting a DVD Player
Use a Component cable to connect the (Y Pb Pr ) sockets on the DVD player to your LCD
TV. Use an audio cable to connect the DVD’s audio sockets to your LCD TV.
Connect all power sources before turning on the power switch
of the LCD TV or other connected equipments.
Press the POWER button to turn on your LCD TV.
To watch DVD, press the INPUT button to select AV1/AV2, AV3,AV4,AV5.
Use an Audio cable to connect the DVD’s audio output sockets to your LCD TV.
Use a S-Video cable to connect your LCD TV and DVD player.
Use an A/V cable to connect the DVD’s composite output sockets to your LCD TV.
Use a SCART cable to connect the DVD’s SCART socket to the LCD TV’s SCART socket.
1METHOD A (AV5 )
METHOD B (AV4)
METHOD C (AV3)
METHOD D (AV1/AV2)
2
3
4
For best picture quality, if your DVD player has (Y Pb Pr) video output, Please use component
cable instead of a standard video or S-video cable (cables not supplied). Otherwise connect
using a standard Scart cable (not supplied).
C
A
B
DVD PLAYER
PrPb
PrPb
AUDIO Cable
S-VIDEO Cable
A/V Cable
COMPONENT/AUDIO Cable
SCART1 or SCART2 Cable
D

18 INSTALLATION
INSTALLATION
Use an Audio cable to connect the VCR’s/ the VIDEO CAMERA’s audio output
sockets to your LCD TV.
Use a S-Video cable to connect your LCD TV and VCR player/ VIDEO CAMERA.
Use an A/V cable to connect the VCR’s/ VIDEO CAMERA’scomposite output sockets
to your LCD TV.
Use a SCART cable to connect the VCR’s SCART socket to the LCD TV ‘s SCART socket.
Connect all power sources before turning on the power switch of the LCD TV
or other connected equipments.
Press the POWER button to turn on your LCD TV.
Connecting a VCR & a Video Camera
1METHOD A (AV4)
METHOD B (AV3)
METHOD C (AV1/AV2)
2
3
5To watch VCR, press the INPUT button to select AV1/AV2 , AV3 or AV4 .
Note: Not all cameras have the ability to connect to a TV. Please check your video camera
user guide for compatibility.
4To watch VIDEO CAMERA, press the INPUT button to select AV3 or AV4.
C
A
B
AUDIO Cable
S-VIDEO Cable
A/V Cable
SCART1 or SCART2 Cable

19
INSTALLATION
INSTALLATION
Connecting a TV Box and Satellite Receiver
Method B(AV3) :
Use an AV cable to connect the TV Cable Box’s composite output sockets to your LCD TV.
Method A(AV1/AV2) :
Use a SCART cable to connect the TV Cable Box’s SCART
socket to the LCD TV’s SCART socket.
1
Connect all power sources before turning on the power switch of the LCD TV or
other connected equipments.
3Press the POWER button to turn on your LCD TV.
To watch TV cable box or programs satellite receiver , press the INPUT button to
select AV1 / AV2, AV3.
4
2
Freeview / Sky boxes will usually have scart cables supplied with them. Connect
the scart cable to the scart socket on the rear of the TV.
B
A
A/V Cable
SCART1 or SCART2 Cable