Goodmans GTVL42W37HD User manual

GTVL42W37HD
LCD Television

TABLE OF CONTENTS
11-Important Considerations to Follow............................... 1
1.1 Cleaning the screen and cabinet... ............................................ 1
1.2 Disposing of your TV at the end of service life............................ 1
22-Features of your new television ..................................... 2
2.1-Special Features ....................................................................... 2
33-Important Safety Instructions ......................................... 3
44-Start ................................................................................... 6
4.1-Aerial connection ...................................................................... 6
4.2-Powering on your device and the initial use ............................... 6
4.3-Batteries ................................................................................... 6
55-Your new television .......................................................... 7
5.1-TV Control Panel....................................................................... 7
5.2-External Connections ................................................................ 7
5.3-Remote Control......................................................................... 8
66-Performing the initial power-on settings ....................... 9
6.1-TV controls................................................................................ 9
6.2-Turning on the TV and Setting the Channels ........................... 10
6.3-Program Table ........................................................................ 12
77-Settings of Your New Television ................................... 13
7.1- Sound Menu Settings............................................................. 13
7.2-Picture Menu Settings............................................................. 14
7.3-Features Menu Settings .......................................................... 16
7.4-Other Picture Features ............................................................ 16
88-Teletext............................................................................ 17
99-External equipment connection .................................... 19
10 10-Help and tips ................................................................. 23
11 11-Technical specifications chart .................................... 24

EN
1 I
1
LCD display panels are manufactured using an extremely high level of precision technology,
however sometimes some parts of the screen may be missing picture elements or have
luminous spots. This is not a sign of a malfunction.
1.1 Cleaning the screen and cabinet...
After powering off, wipe the screen and the cabinet clean with a soft
and dry cloth. We recommend that you do not use patented polishes or
solvents to clean the screen or cabinet since they may cause damage.
1.2 Disposing of your TV at the end of service life...
The cold cathode fluorescent lamp found in your LCD screen contains
a very small amount of mercury. Once your TV set has completed its
physical life, please dispose of it in accordance with local government
regulations or leave it at a recycling centre.
Important Considerations to Follow

EN
2 I
This product, has been manufactured in modern facilities in accordance with total quality
principles, to ensure best performance. Please take time out to read this manual carefully
before you use your TV and keep safe for future reference.
2.1-Special Features
• 2HDMIconnectioninput
• HD-Ready
• HDCPfeature
• Compatiblewithcablebroadcasts
• Wideangleofvision
• ScartandAVconnection
• S-VHSandPhonoinputsforS-Videoconnection
• PCconnection
• Lowenergyconsumption
• AVL
• Programmablepoweronfeature
• Programmablepowerofffeature
• 100pagesTeletext
• Fastext
• SharpnessfeatureinColourTransitions(CTI)
• Sharpnessfeatureandpictureresolution(LTI)inblack-whitetransitions
• AclearerPicturemadepossiblewithaDigitalCombFilter
• DNRNoisereduction
• On-screenviewingofallsettings,programnumbersandalltheprocesses
• ManualFineTuning
• 100Programmemory
• Infraredremotecontrolequippedwithallfunctions
• Multilanguagemenuoption
• ParentalControl
• PanelLock
• Renaming,deleting,skippingandrelocatingtheprograms.
• FeatureofviewingtheNTSCbroadcastviaScartinput
• 4:3,16:9,14:9,Letterbox,SubtitleandPanoramapictureformats
HDMI,theHDMIlogoandHigh-DefinitionMultimediaInterfacearetrademarks
orregisteredtrademarksofHDMILicensingLLC.
To wall mount or attach LCD TV to a free-standing stand please remove the table stand as
follows.
2Features of your new television
• Coveratablewithasofttowel(orotherprotectiontopreventdamagetotheTV
ortable)
• CarefullylaytheT.V.frontdownonthetable
• positiontheT.V.tablestandsothatithangsovertheedgeofthetable
• RemovethescrewsthatholdthestandtotheT.V.
• Removethestand.
• AttachanynewbracketsbeforeliftingT.V.backup.
Note:Keepremovedstandandscrewssafelyforfutureuse.

EN
3 I
3Important Safety Instructions
This symbol is used to warn the user about the “dangerous voltage”
contained inside the housing of the product that may create a risk of
electrical shock.
This symbol is used to remind the user important usage and service
instructions supplied with the TV.
1) Please READ the operating
instructions before using
the TV for the first time.
2) Please observe the
instructions contained in
theOperatingInstructions.
3) Please consider all warnings.
4) MAKE SURE that all power
connections(extension
cables and the
connections between the
TVcomponents)have
been made properly and
in accordance with the
manufacturer’s instructions. Before
making or changing the connections,
power off the TV and unplug the
mains connection plug.
5)Ifyouhaveanydoubtsregardingthe
installation, operation or safety of the
TV, please REFER to the vendor.
6) BE CAREFUL with glass panels and
covers on the TV. The screen glass
may break and cause serious injuries
if something hits it.
7) To ensure adequate ventilation,
please leave a clearance area of at
least 10 cm around the television.
This clearance prevents the TV
from overheating and consequently
causing damage.
• UsingtheTVindustyenvironments
should also be avoided.
• Neverblocktheslotsandopenings
by placing the TV on a bed, sofa,
pillow or other similar surfaces.
• NeverinstalltheTVintoclosedplaces
such as bookcases or cabinets
unless adequate ventilation is
provided.
8) DO NOT COVER the
ventilation openings of
the TV with items such
as newspapers, table-
clothes, curtains, etc.
Overheating causes damage and
shortens the service life of the TV.
9) Your TV may be damaged
if you place it under direct
sunshine or close to a
heater. Please abstain
from using the product
in very hot or humid locations or in
places where the temperature is likely
todecreasebelow5°C(41°F).DO
NOT PLACE on or near the TV any
hot objects or items with open flame
such as candles or any night lamps.
The high temperature can melt plastic
parts and cause a fire.

EN
4 I
10)Neveroperate
electrical TV close
to water. Operating
such TV, for example,
near a bathtub, washbasin, kitchen
washbasin, washing basin, wet
basement and swimming pool can
cause fire or electric shock.
• Donotallowyour
TVtogetwet.Never
pour any liquids
onto the TV. Do not
operate your TV if
any solid or liquid
substance enters into it. This can
cause electric shock and your TV
maybedamaged.Haveitchecked
immediately by qualified personnel.
• Keepopenflame
sources(suchas
candles)awayfrom
TV in order to avoid
risk of fire.
11) DO NOT USE
headphones at extremely
high volume levels since
this may cause permanent
loss of hearing.
12) Operate your TV only
from230V50Hz
supply.UsetheAC
power cable supplied
with the product.
• The socket into which you plug
in the AC power cable or the
adaptor must be within easy
reach.
• Turn off your TV with the ON/OFF
button and then unplug it in order
to disconnect it from mains.
13) Make sure that the power
cable is not stepped
on and that there is no
bending at the plug
sections, plug heads and
TV output point.
14) Useonlytheadd-ons/accessories
specified by the manufacturer.
15)Useonlytogetherwith
the carts, bases, tripods,
brackets or stands specified
by the manufacturer or sold
along with the TV. Place
your TV on a level surface.
16)Unplugthepowercable
during thunderstorms or
when you will not use your
TV for a long period of time.
17) Consult authorised service
personnel for service
requirements.Never
attempt to repair
the TV yourself.
Opening the cabinet
can expose you
to dangerous voltages or other
hazardoussituations.Serviceis
required in situations such as damage
to the power cable of the TV or its
plug, water spills or substances falling
into the TV, the TV is subjected to
rain or moisture, it does not operate
normally or it is dropped.
18) Wipe the TV cabinet
clean with a soft and dry
cloth. Wipe dust from the
screen gently with a soft
cloth. Stubborn stains
can be cleaned with a
cloth slightly moistened
with soap and lukewarm water.
Neverusesolventssuchasthinneror
gasolineforcleaning.UnplugtheAC
power cable from the socket when
cleaning the TV. Otherwise, there is
the risk of electric shock.

EN
5 I
19) Do not dispose of the
batteries in fire.
• Donotshortcircuit,
dismantle or overheat
the batteries. There is
the risk of explosion
if the batteries are not replaced
correctly. Replace only with the
same or equivalent type batteries.
20) Disposing of the exhausted
batteries:
Dispose of the exhausted
batteries in accordance with
the local laws and regulations in order
to protect our environment.
21) Do not dispose of your TV
with regular household waste.
Observe local laws and
regulations for disposal.
Note 1: This is a Class A product.
During operation, the TV can cause radio
interference.Inthiscasetheusermayhave
to remedy this. Please contact your specialist
dealer.
Note 2: Electromagnetic fields can cause
temporary performance degradation. This
can be distinguished as noise in the image.
Connection of mains Cable
Always use the mains cable supplied.
ELECTRICAL CONNECTIONS
For your own safety read the following instructions carefully before attempting to replace
the moulded mains plug. Please check the type of mains lead supplied with your
television and refer to the appropriate information below should you need to replace it.

EN
6 I
4Start
Remove your television carefully from its
box. You can keep the packaging of your
television to use in future.
Contents of the box
Power cable
Remote control
2 batteries
Note:The Scart, VGA and RCA cables are
not supplied with the TV.
4.1-Aerial connection
4.3-Batteries
Open the lid of the battery compartment
and make sure that you have placed the
batteries in the correct direction. For this
remotecontrol,UM-4,IECR03orAAA1.5V
batteries are suitable.
Do not throw your old batteries into the fire,
discard them in a dedicated waste area for
this purpose.
Do not mix used batteries with new ones or
different types of batteries together.
The performance of the remote control will
be reduced at a distance of 8 meters from or
at an angle of 30 degrees beyond the centre
of the TV.
Connect the aerial plug directly to the aerial
socket located on the back panel of theTV.
4.2-Powering on your device
and the initial use
1.Insertthepowercableintothemains
socket located on the back panel of the
TV.
2.Insertthemainsplugintothemains
socket.
3. To power on your television, press any
numerical key or PR+ or PR- keys on the
remote control.
Note:Ifyouarenotgoingtouseyour
television for a long time, unplug its power
cable from the socket.

EN
7 I
5Your new television
5.1-TV Control Panel
or or
ProgramUp/Downbutton VolumeUp/Downbutton
or or
Power/Standbybutton
or or or
Menu/Sourcebutton
Stand by indicator
Bright light: TV is in Stand-by
Dimmed light: TV is On
No light: Power Cable is not connected
5.2-External Connections
1-Componentvideoinput(Y)
2-Componentaudioinput(L)
3-Componentvideoinput(R)
4-Componentaudioinput(Pb)
5-Componentvideoinput(Pr)
6-VGA(PCconnectioninput)
7-PC audio input
8-Aerial input
9-AV scart input
10-Power input
11-SoundinputPHONOconnector(Right/R)
12-SoundinputPHONOconnector(Left/L)r
13-VideoinputPHONOconnector
14-S-VHSinput
15-Headphoneinput)
16-HDMI1input
17-HDMI2input
Note 1:HDMIviatheHDMIsocketoffersthebestpicturequality.(onlyforHDMIsources)
Note 2: Above drawing for external connections is representational. Their order and places
on your TV may be different.
Please see Technical Specifications Table on page 24 for the available external connections
on your television.

EN
8 I
5.3-Remote Control
Stand-bymodeOn/Offbutton
Temporarysoundmute(Mute)button
Source menu button
Picture Format selection button
Numericbuttons
PageStopbuttoninTxtmode(Hold)
Question/AnswerbuttoninTxtmode(Reveal)
Informationbutton
IndexpagebuttoninTxtmode
MENUbutton
Exit menu button
Return to previous menu button
Upmovementbutton(Menu)
NextpageselectionbuttoninTxtmode
Downmovementbutton(Menu)
Previous page selection button in Txt mode
Right/Leftmovementbuttons(Menu)
Menu selection confirm
Volume down button
Volume up button
Program forward selection button
Program backward selection button
Red teletext button
Green teletext button
Yellow teletext button
Blue teletext button
Teletext/Mixselectionbutton
Sound Mode selection button
Teletextpageenlargebutton(Double)
Picture Mode selection button
PageupdatebuttoninTxtmode(Update)
Last viewed program selection button
SubpagebuttoninTxtmode(SubPage)
Note: When no menu is open on the screen,
Up/Down movement buttons function as
program forward/backward buttons,
and left/right movement buttons perform
Volume up/down functions.
ZOOM mode selection button
Time display button
Please note following functions on the
remote have no function as they are used on
anothermodel:PIP,POS,FREEZE.

EN
9 I
6.1.5-Temporary sound mute (MUTE)
To temporarily mute the sound of
your television, press the MUTE
buttononyourremotecontrol.In
that case, MUTE symbol will appear
on the screen. When you press the
same button a second time, the
soundwillberestored.IfyoupresstheVOL+
button while in the Mute mode, the sound
level is increased and the Mute function is
aborted.
6.1.6-Returning to Selected Program
(SWAP)
Allows you to switch between the
current program you watch and the
last selected program. For example,
if you change the channel to Program 11
while you were watching Program 1, press
SWAP button to switch back to Program
1. Press SWAP button to switch back to
Program 11 again.
6.1.4-Performing the Volume setting
You can adjust the volume of your
television by using the VOL+/VOL-
buttons on your remote control.
6Performing the initial power-on settings
6.1-TV controls
6.1.1-Temporary on/off (STAND-BY)
Press the red STAND-BY button
located on the upper left hand side
of your remote control while your
television is switched on, the sound
andthepicturewillgooff.Inthe
stand-by mode, the power indicator
of your television will glow brighter.
To switch your television back on,
either press any numeric button or
PR+/PR- buttons.
6.1.2-Channel Selection
Select program number by pressing
the PR+/PR- buttons located on
your television and your remote
control. To select the programs
that are above 9, you can use
theNumericalbuttons.Youmay
enter the number of the program
you would like to select using the
numerical buttons. For example,
to switch to the program number
12, press respectively the numeric
buttons 1 and 2 on your remote
control. You can perform the
program selection also from the Program
Table.
6.1.3-TV and AV Mode Selection
Press the AV button on your remote
control. SOURCE menu will be
displayed. Select TV or desired AV
mode from the Source menu with
Up/Down movement buttons and
confirm with OK button so that your
television will switch to the source
you have selected.
6.1.7-Main Menu
Press the MENU button. The Menu including
all the setting menus will appear on the
screen.NavigatethroughtheMenutitles
with the Up / Down movement buttons and
press the OK button to select the desired
menu.Ifyouwanttoexitthemenuinany
step, just press the EXIT button. Press
BACK or MENU buttons to return to the
previous Menu while you are in a sub menu.
MAIN MENU
SOUND
PICTURE
PROGRAM TABLE
SETUP
FEATURES
SELECT EXIT
Picture Mode selection button
PageupdatebuttoninTxtmode(Update)

EN
10 I
You can tune the programs
automatically with the Autoprogram
function of your television and then
sort the channels as you desire by
means of the Program Table. Press
the MENU button on your remote
control. Select SETUP by pressing
the down movement button and confirm
your selection with OK button. Setup menu
is displayed.
6.2-Turning on the TV and
Setting the Channels
LANGUAGE menu will be displayed on the
screen when you turn on your television for
MENU
LANGUAGE
LANGUAGE ENGLISH
SELECT
the first time. Select the language you would
like to use on your television and press OK
button to continue.COUNTRY SELECTION
menu will be displayed.
Iftheaerialconnectionsaremadeproperly,
select the country with Up/Down, Left/
Right movement buttons and press OK
button to start autoprogramming. At the
same moment, the marker indicating the
progress of the autoprogramming will bi
displayed.
The Program Table, which will allow you
to sort the channels as you wish, will be
displayed after the search is complete.
6.2.1-Automatic tuning of channels
and storing in the memory
You can either tune the programs
Automatically or Manually and store them in
your television.
Note:Ifyourtelevisiondoesnotreceiveany
aerial broadcast for a period of 5 minutes,
it automatically switches to the stand-by
position. The countdown OSD is displayed
on the screen during the last 1 minute.
SETUP
SELECT
BACK
SYSTEM I
CHANNEL S06
FINE TUNE 0
SEARCH ◄ ►
PROGRAM NO P13
STORE
AUTOPROGRAM
COUNTRY SELECT
BELGIUM NORGE
CZECH REP. ÖSTERREICH
DANMARK POLSKA
DEUTSCHLAND PORTUGAL
ELLADA SCHWEIZ
ESPANA SUOMI
FRANCE SVERIGE
HUNGARY TÜRKİYE
IRELAND U.K.
ITALIA ..........................
NETHERLANDS
START AUTOPROGRAMMING
BACK
Select PROGRAM NO tab by pressing
the Up/Down movement buttons in Setup
menu, enter the channel number to be
searched and stored automatically, then select
AUTOPROGRAM tab by using the Up/Down
movement buttons and press OK button;
Country Selection menu will be displayed.
IntheCountrySelectionmenu,selectthe
country, whose broadcast you would like to
watch in priority, by pressing the Up/Down
and Right/Left movement buttons and
start autoprogramming by pressing the OK
button. The channels will be automatically
searched and those found will be stored in
memory starting from the program selected
in the Setup menu. At the same moment,
the marker indicating the progress of the
autoprogramming will be displayed.
COUNTRY SELECT
BELGIUM NORGE
CZECH REP. ÖSTERREICH
DANMARK POLSKA
DEUTSCHLAND PORTUGAL
ELLADA SCHWEIZ
ESPANA SUOMI
FRANCE SVERIGE
HUNGARY TÜRKİYE
IRELAND U.K.
ITALIA ..........................
NETHERLANDS
START AUTOPROGRAMMING
BACK
AUTOPROGRAM
SEARCHING 20%
STOP

EN
11 I
To stop the process at any given time,
please press the MENU button. The
Program Table, which will allow you to sort
the channels as you wish, will be displayed
after the automatic search is complete.
6.2.2-Manual tuning of channels and
storing in the memory
6.2.2.1-If you already know the
channel number
Press the MENU button. Move to the
SETUP menu by pressing the Down
movement button in Main Menu and confirm
your selection with OK button. The Setup
menu is displayed.
SETUP
SYSTEM I
CHANNEL S06
FINE TUNE 0
SEARCH ◄ ►
PROGRAM NO P13
STORE
AUTOPROGRAM
CHANGE
BACK
Select the system in which you
would like to make the search
from the SYSTEM tab. Move into
CHANNEL tab by pressing the
down movement button. Press OK
on your remote control to select
“S” for cable channels and “C” for
channels received via the aerial.
Move onto the PROGRAM NO tab
and using the number buttons enter
the channel number in which you
wouldliketohavethechannelstored.Ifthe
broadcast viewed on the screen is of your
desired quality, first move onto the STORE
tab with the down movement button to
store in the memory the selection you have
made and store the channel by pressing
the Left or Right movement buttons. The
prompt STORED will be displayed briefly.
The channel will be stored according to the
program number of your choice. You can
tune and store in memory other channels the
sameway.Intheeventthatyouwishtoexit
the channel settings menu for any reason,
simply press the EXIT button.
6.2.2.2-If you do not know the
channel number
Press the MENU button. Move to
the SETUP menu by pressing the
down movement button in Main
Menu and confirm your selection
with OK button. The Setup menu
is displayed. Select the system in
which you would like to make the
search from the SYSTEM tab. Move
into CHANNEL tab by pressing the
down movement button. Press OK
on your remote control to select
“S” for cable channels and “C” for
channels received via the aerial.
Select SEARCH tab using the up/
down movement buttons, and scan
the channels in ascending order with Right
movement button and in descending order
with Leftmovementbutton.Ifthechannel
that is found is of your liking, select the
STORE tab. Then store it in the memory
by pressing the Right or Left movement
buttons. Repeat the same procedure for
other channels by selecting the program
number of your choice from the PROGRAM
NOtab.Ifthechannelyoufoundisnotofthe
desired quality and requires Fine Tuning or if
you would like to rename the channel, refer
to the relevant sections.
6.2.3-Fine Tuning
Ifthechannelyoufoundisnotof
the desired quality and requires
Fine Tuning, then select the
FINE TUNE tab by pressing the
Down movement button in the
SETUPmenu.UsingtheLeft/
Right movement buttons on your
remote control, adjust the channel
displayed on the screen to your
desiredquality.Undernormalcircumstances,
you will not be required to use the Fine Tune
function. The AFC values of your television
will automatically adjust and lock themselves
tothechannel.However,youmightneed
it in case the television transmitters do not
operate according to the standards. To store
in the memory, the settings you have made,
select the STORE tab and press the Right
or Left movement button.

EN
12 I
6.3.1-Switching the locations of the
stored channels
Select the program you would like to
relocate by pressing the Up/Down
or Left/Right movement buttons.
Press the “GREEN” button. Green
will blink. Move to the other program
you would like to relocate by pressing
the up/down or right/left movement
buttons. Finish the relocation
process by pressing the “GREEN”
coloured button. The channel in the
first program number you selected
has been moved to your second selected
program number and the channels between
both program numbers have been shifted to
the initially selected program number. After
setting is complete, press the EXIT button to
exit the menu.
6.3.2-Deleting a stored channel
Select the program you would like to
delete by pressing the up/down or
right/left movement buttons. Press
the “BLUE” button. The blue button
on the menu will blink for approval.
You may perform the deletion
process by pressing the “BLUE” button
or you may abort the deletion process by
pressing the MENU button. Once you pres
the “BLUE” button, the selected program
is deleted and the following channels are
transferred to after this program number.
After setting is complete, press the EXIT
button to exit the menu.
6.3-Program Table
Press the MENU button. Move to the
PROGRAM TABLE tab by pressing the
Down movement button in Main Menu and
confirm your selection with the OK button.
Program Table menu will be displayed.
PROGRAM TABLE
00 05 10
01 CHANNEL 06 11
02 CHANNEL 07 12
03 08 13
04 09 14
SKIP
MOVE
NAME
DELETE
SELECT BACK
6.3.3-Skipping a stored channel
Intheeventthatyoudonotwishto
see certain programs while navigating
through the channels using the
PR+/PR- buttons, then you can
use this function. Select the program that
will be hidden by pressing the up/down
or right/left movement buttons. Press the
“RED” button. The name of the program
to be skipped shall appear in red. You may
perform this procedure for more than one
program. To view the skipped program,
directly enter the program number using the
numeric buttons. To cancel the program
skipping process, press again the “RED””
button. After setting is complete, press the
EXIT button to exit the menu.
6.3.4-To name the channels
You can assign your program or
programs of choice the names that
have a maximum of five characters.
Select the program you would like
to name from the Program Table by
pressing the up/down or right/left
movement buttons. Press the “YELLOW”
button. An empty space appears beside
the channel for which you would like to
specifynameinformation.Here,choose
the desired letter, number or sign using
the up/down movement buttons. For the
second character, press the right movement
button and then select the desired letter,
number or sign again with the up/down
movement buttons. After entering all the
characters, store the name you have written
in the memory by pressing the “YELLOW”
button. To write names for any of the
other programs, simply repeat the above
procedure.Ifyouwanttoexitthemenu,
simply press the EXITbutton.Iftheprogram
is not named, then the channel number of
that program will be displayed automatically.

EN
13 I
7Settings of Your New Television
7.1- Sound Menu Settings
You may perform volume settings by
using the VOL+ or VOL- buttons on
your television or the VOL+/VOL-
buttons on your remote control. You
can perform other Sound settings by
entering the Sound menu. For this,
press the MENU button on your
remote control. Select SOUND by
pressing the Up/Down movement
buttons from the main menu and press the
OK button. The Sound menu is displayed.
7.1.3-Sound Mode
Ifyouwanttogivedepthtothesoundofthe
program you are watching, select SPATIAL
item by using Left/Right movement buttons.
Note:IfthesoundmodeissettoSpatial,
then Balance, Bass and Treble settings
are turned off and these items can not be
accessed from the menu.
7.1.4-AVL (Automatic Volume
Limiting)
Television transmitters have different sound
levels. This can be noticed as high and low
volume levels in different channels while
switching from one program to another.
UsingtheLeft/Right movement buttons,
select ON.TheAVL(AutomaticVolume
Limiting)functionmaintainsthesame
sound level as you switch from program to
program. Select OFF to cancel it.
7.1.5-Bass
Select Bass option to increase or decrease
the deep sounds in the broadcast and set
it as you desire by pressing the right/left
buttons.
7.1.6-Treble
Select Treble option to increase or decrease
the sharp sounds in the broadcast and set
it as you desire by pressing the right/left
buttons.
7.1.7-Headphone
By connecting headphones to your television
you can listen to the program sounds
independently from your television. To
turn up and down the headphone volume
level, select HEADPHONE tab from the
Sound menu and adjust the volume level by
using the Left/Right movement buttons.
When you want to hear the sound from the
headphone only, just press the MUTE button
on your remote control.
You can select the tab which you
want to process with the Down
movement button and set its level
with Left/Right movement buttons.
7.1.1-Balance
To adjust the sound balance between the
right and left loudspeakers to the desired
level, select the BALANCE tab in the sound
menu by using the Down movement button.
UsingtheLeft/Right movement buttons
adjust this option to the desired level.
7.1.2-Sound Type
The program you watch may be broadcast
instereoorintwodifferentlanguages.Using
the Right/Left movement buttons in this
menu, you can perform Mono/Stereo or
Dual-I/Dual-II language selection.
SOUND
VOLUME
BALANCE
SOUND TYPE STEREO
SOUND MODE NORMAL
AVL OFF
BASS
TREBLE
HEADPHONE
CHANGE BACK

EN
14 I
7.1.8- Sound Effects
Usingthe( )buttononyourremote
control, you may select either one
of the preset MUSIC, SPORTS,
CINEMA and SPEECH options
which enhance the sound effect depending
on the feature of the program you are
watching or the USER option which you can
adjust as you desire from the sound menu.
7.2-Picture Menu Settings
7.2.1-Picture Menu
You can perform other picture
settings by entering the Picture
menu. For this, press the MENU
button on your remote control.
Select PICTURE by pressing the
Up/Down movement buttons from
the main menu and press the OK
button. The Picture menu will be
displayed.
PICTURE
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
DNR OFF
TINT
COLOUR TEMPERATURE NORMAL
NCM OFF
SABC OFF
DYNAMIC CONTRAST OFF
BACKLIGHT
CHANGE BACK
You can select the desired setting by
pressing the Up/Down movement
buttons and adjust their levels with
Right/Left movement buttons.
You can adjust BRIGHTNESS,
CONTRAST, COLOUR and
SHARPNESS levels as you desire.
The changes you have made in
the picture settings will be stored
in the memory without requiring any other
operations.
7.2.2-DNR (Noise reduction)
You may reduce interference and noise
formed in the picture by using this feature.
Select DNR tab in the Picture menu with the
Up/Down movement buttons to activate
this feature and select one of the OFF,
LOW, MID or HIGH options with Left/Right
movement buttons.
7.2.3-Tint
WhenNTSCvideoisinputviaScart,you
maymakeHuesettings.Thetintoptionis
not active in the menu when you have not
inputthistypeofavideo.WhenaNTSC
video is connected via the Scart, this option
becomes active in the menu.
7.2.4-Colour Temperature
Colour intensity of the picture can be
adjusted with this feature. Select COLOUR
TEMPERATURE tab from the Picture menu
by pressing the up/down buttons to activate
this feature and then select one of the Cool,
Normal or Warm options by pressing the
right/left buttons.
7.2.5-NCM (Natural Colour
Management)
NCMisperformedbyincreasingthe
specified colours in a striking manner. Select
NCM tab in the Picture menu by pressing
the up/down movement buttons and
then select On by pressing the right/left
movement buttons to activate this feature.
7.2.6-SABC (Scene Adaptive
Brightness Control)
SABC option allows for the automatic control
of the brightness, contrast, colour and
sharpness according to the scene you are
watching. Select SABC tab in the Picture
menu by pressing the up/down movement
buttons and then select On by pressing the
right/left movement buttons to activate this
feature.
Note:IftheSABC option is set to On,
then Brightness, Contrast, Colour and
Sharpness settings are turned off and these
items can not be accessed from the menu.
7.2.7-Dynamic Contrast
This feature allows making brightness
settings according to the picture. A brighter
or dimmer picture can be sent to the screen
according to the brightness level of the
picture. Thus, a wider effect is obtained in
terms of contrast. To activate this function,
select Dynamic Contrast tab in the
Picture menu with the up/down movement
buttons and select On option with right/left
movement buttons.

EN
15 I
Note:IftheDynamic Contrast option is set
to On, then Backlight feature will be turned
off and this item can not be accessed from
the menu.
7.2.8-Backlight
With this feature, you can adjust the intensity
of light reflected to the LCD Panel. To
activate this function, select Back Light
tab in the Picture menu with the up/down
movement buttons and adjust the level as
you desire with right/left movement buttons.
7.2.9-Picture Smart
You can select either one of the
three non-adjustable settings in the
memory or one of the user options
bypressingthe( )buttononyour
remote control. SOFT, NATURAL, RICH are
default values; USER represents the values
you stored in memory.
7.2.10-Picture Format
With this option, you can view
the broadcast you watch in a
format of your choice. You may
view broadcastings in either AUTO, 16:9,
14:9, 4:3, LETTERBOX, SUBTITLE or
PANORAMA formats. Picture format can
be selected as 16:9, 4:3 or 14:9 formats in
HDMI, YPBPR and PCmodes.Inthatcase,
the name of the selected picture format will
be displayed in the centre of the screen.
7.2.10.1-Auto
Some movie channels may broadcast in
the16:9format.Ifyouwouldliketoseethis
format automatically, then select AUTO.
Inthatcase,AUTO 16:9 appears on your
screen.
7.2.10.2-16:9
Please use this setting for watching wide
screen DVDs, wide screen video cassette
or16:9formattedbroadcasts.Sincevarious
screenformatssuchas16:9,14:9andetc.
are used, black stripes might be formed on
the lower and upper parts of the screen.
7.2.10.3-14:9
This is a movie format.
7.2.10.4-4:3
Usethissettingtowatchthebroadcastsin
the4:3format.
7.2.10.5-Letterbox
Whilewatchinga“16:9orCinemascope
formatted” film or video cassette, this setting
willeliminateorminimizetheblackstripeson
thebackgroundbyzoominginthepicture
without diffusing it.
7.2.10.6-Subtitle
Ifthesubtitlesaretransmittedinthe“16:9
formatted” broadcast, then this setting will
push the picture upwards in order to ensure
the entire written text to be seen.

EN
16 I
7.2.10.7-Panorama
This setting will enlarge the image to fit the
screenbystretchingtheimagehorizontally
while holding the correct proportions at the
centre of the image. Some distortion may
occur.
7.3-Features Menu Settings
Press the MENU button on your
remote control. Select FEATURES
by pressing the Up/Down
movement buttons from the main
menu and press the OK button. The
Features menu will be displayed.
FEATURES
LANGUAGE ENGLISH
TIMER
CHILD LOCK OFF
PANEL LOCK OFF
CHANGE BACK
Time data is obtained from Teletext; if no time
data is available then select TIME with the up/
down movement buttons and enter the current
time with numeric buttons. Select the ON TIME
and OFF TIME in the same manner and specify
the time. Enter the program number you desire
with the numeric buttons or the external source
with the AV button into PROGRAM NO tab to
specify the channel or source from which you
would like the TV to be turned-on to. At the end
of the time you specified, your television will
automaticallyswitchtostand-by.Iftheontime
for TV is specified in the Menu, the TV will switch
to the selected program at that time; if the TV is
in standby mode, then it will be turned on with
the selected channel.
Note: The time difference between the On Time
and Off Time entered in the Timer menu must at
least be 2minutes.
7.3.3-Child Lock
IfthisfeatureisturnedOn,theprogramcurrently
being watched becomes locked, the image and
sound goes off and the locked symbol appears
on the upper left corner of the screen. The
locked channel is skipped when you channel
search with P+, P- buttons.
7.3.4-Panel Lock
IfthisfeatureisturnedOn,thecontrolbuttons
on your LCD television will be locked and will
not function. They will be active again when the
feature is turned Off.
7.4-Other Picture Features
7.4.1-Zoom
Press the ZOOM button on your remote control
while watching a channel to activate this feature.
Duringthezoomingprocess,theimageis
zoomedininthreestagesorientedtothecentre.
Note:Zoom mode does not function with
COMP/HDMI/PC inputs. Zoom mode is
aborted when the channel is changed or Teletext
is activated.
You can select the titles for which
you would like to perform an
operation in this menu by using the
up/down movement buttons.
7.3.1-Language
Select the Language tab and press right/left
movement buttons to select the language of
the desired country. All the setting displays of
your television will be shown in the language
that you selected.
7.3.2-Timer
Your television is equipped with the feature of
being able to be turned off and on at periods
that you specify. Select TIMER by pressing
theup/downmovementbuttonsandpress
the OK button in order to have your TV
turned off at the end of a desired period. The
Timer menu will be displayed.
TIMER
CLOCK - - : - -
ON TIME - - : - -
OFF TIME - - : - -
PROGRAM NO P01
CHANGE BACK

EN
17 I
8.3-Teletext image in the TV picture
(MIX)
With this feature, you can watch
the teletext information and the TV
broadcast together. Thus, you can
follow the teletext broadcast of the
channel while you watch the TV
broadcast. To do this, press TXT
button in a channel with Teletext broadcast.
8.4-Page enlarge button (DOUBLE)
Usingthisbutton,youcanwatch
the top half of the teletext page in an
enlarged format. To be able to view
the bottom half of the enlarged page, press
the same button for the second time. Once
you press the same button the third time, the
pagewillberestoredtoitsnormalsize.
8.5-Page Stop (HOLD)
Some information is laid out by the
broadcasting agency in multiple
pages and it is broadcast in an
automatic cycle mode. For example,
on a text of four pages, the pages
are indicated with the figures 01, 02, 03 and
04 on the bottom of the page. To view one of
these pages for a longer time, press the FAV
button. When you press the same button
again, the cycle continues.
8.2-Page Selection
To be able to view the page you
would like on the screen, type in
the number of that page using the
numerical keys. You can see the
number you have entered on the left
side of the upper title tab. When you
would like to turn the pages one by
one, you can go to the next page
pressing the up button and to the
previous page pressing the down
button. Press the INFO button to
returntotheIndexpage.
To be able to receive a quality teletext
broadcast, a good aerial system and a
broadcast signal that is not weak, with
no reflections and interference from other
channels are required. Even in a very clear
reception, it is normal for some characters
or tabs to be lost. Such conditions will
automatically be improved in a short time
under normal circumstances.
8.1-Entering the Teletext Mode
Inachannelthatdoesnothave
the Teletext feature, NO TEXT will
be displayed when you press the
TXTbutton.Inordertoswitchyour
television to the teletext broadcast, please
press the TXT button in a program that
has a teletext broadcast. To switch back
to the television broadcast, press the same
button twice. Once you have switched to
the teletext broadcast, the initial page that
appears will be the index page.
Inthispage,thetitlesofthetopicsinthe
teletext broadcast and the initial page
numbers will appear.
8Teletext

EN
18 I
8.6-Subpage selection (SUB)
Ifthepageoftextyouareviewing
contains sub pages the page
numbers starting from 01 appear on
the screen. You can switch to the
sub pages with the SWAP button.
Inwhichcase,thesubpagetabis
displayed on the bottom line within
“”Red -” and “Green +” frames.
You can select the subpages by
pressing the “RED” and “GREEN”
buttons. You can exit the subpage by
pressing the SWAP button again.
8.7-Temporary TV Picture (UPDATE)
This button allows you to switch to
the television picture while the page
you want is being searched in the
teletext broadcast eliminating the
need to wait during the search. You may
switch to the television picture by pressing
the( )buttonwhileTeletextissearchingfor
your desired page. Once the page you want
is found, the number of that page appears
on the screen.
8.8-Question - Answer Button
(REVEAL)
Sometimes, a teletext page contains
a hidden answer such as a game or
a riddle. Press the EPG button to
disclose the hidden answer.
8.9-Fastext
The coloured buttons on the remote control
are for the fastext feature. When you select
any page, the titles on various subjects may
appear on the screen in four different colours
orinsidecolouredframes(red,green,yellow
andblue).Bypressingthebuttonpertaining
to the relevant colour on the remote control,
you can access the subject of your choice
without waiting.
Note: The fastext feature is not available for
allteletextbroadcasts.Itisdeterminedby
the broadcasting agency whether it is to be
broadcast or not.