Goodmans 363566 User manual

尺寸：210*148ＭＭ
说明书190g铜版纸，
对钉成册，
字体：Helvetica，
字体颜色85%黑

HD PROJECTOR
USER MANUAL
MODEL: 363566

Welcome
Your HD Projector
Quick Setup
Operation
1
2
3
4
2.1
2.3
2.2
2.4
In The Box
Top View
Rear View
2.5 Left Side View
2.6 Remote Control
Mains Power
3.1
3.2
Picture Menu
Sound Menu
3.3 Options Menu
4.1
4.2
Power
Projector Placement
4.3
4.4
Viewing Options
Ceiling Mount
4.5
4.6
Angle Adjustment
Image Adjustment
4.7
4.8
HDMI
Audio/Video Input
4.9
4.10
Micro SD & USB Storage Devices
Computer Video (VGA)
4.11
4.12
Bluetooth pairing to Wireless Speakers, Headphones
or a Sound Bar
Headphone Jack/Audio Out
3.4 Time Menu

Troubleshooting5
Technical Specifications
6
EC Declaration
7

Welcome1
Your HD Projector
2
2.1 In The Box
2.2 Mains Power
Thank you for choosing this Goodmans product. We have been
making electrical products for the British people for over 90 years.
Each of our products have been carefully designed to be great at
what they do and this one is no exception. We hope you enjoy
your new HD Projector.
Your HD Projector uses a 12V 3.5A power adapter. Please ensure
that your mains supply is compatible before use. Disconnect the
power cord from the mains when not in use.
Only use the supplied adapter to power the Projector.
Carefully remove your HD Projector from the packaging.
Inside the box you will find:
• HD Projector
• Power Adapter
• Remote Control: requires 2 x AAA batteries(not included)
• HDMI Cable
• 3.5mm to RCA Audio/Video Cable
• Quick Start Guide
• Instruction Manual
• Safety & Guarantee Leaflet

2.3 Top View
Projector Lens
Focus Adjustment
Keystone Adjustment
Indicator Light
Red: stand by;
Green: power on.
Source
Press to change media source mode.
Menu
Press to access on-screen menus and options.
Arrows/OK
Press to navigate on-screen menus and make selections.
Power
Press to power ON/OFF the projector.
Return
Press to return to a previous page or setting in the on-screen
menus.

Duplicated on the front of the projector.
2.4 Rear View
2.5 Left Side View
VGA/PC Input
Remote Sensor
3.5mm Audio Output
3.5mm AV Input
Micro SD Card Port
HDMI Input 1 & 2
USB Port
DC Power Port
Speakers
Height Adjustment Peg

Press to mute volume.
Press to skip between chapters or
tracks.
Press to search through an
individual chapter or track.
Press to stop playback.
Press to ON/OFF power.
2.6 Remote Control
Power
Mute
Press to flip display image 180°.
Flip
Press to adjust audio level.
VOL+ / VOL-
Press to navigate and confirm
selections in Settings and other
menus.
Arrows/OK
Previous / Next
Press to play or pause an individual
chapter or track.
Back / Fwd
Stop
Play/Pause
OK
1 2 3
4 5 6
78 9
0
SOURCE
GOTO ZOOM
MENU
FLIP VOL – VOL +
EXIT

Batteries
Press to select media source
(AV, PC, HDMI, MEDIA).
Requires 2 x AAA batteries (not included).
Source
Press to access projector Settings.
Menu
Press to exit menus.
Exit
Press to enter specific chapter or
track numbers. Use Play button to
begin playing.
Go To/Number Keypad
Press to zoom display image in
or out.
Zoom
AAA / UM4
AAA / UM4
BATTERY DOOR

Quick Setup3
3.1 Picture Menu
Picture Mode: Select Vivid, User (custom), Soft, or Standard.1.
Color Temperature: Select Warm, Cool, or Medium.3.
Aspect Ratio: Select 16:9, 4:3, Auto.4.
Noise Reduction: Select low, middle, high, default, off.5.
Contrast, Brightness, etc: Set Picture Mode to "User" to adjust
these settings.
2.
Select Menu Adjust
Picture Mode Standard
Contrast 50
Brightness 50
Color 50
Sharpness 50
Tint 50
Color Temperature Medium
Aspect Ratio
Noise Reduction Middle
Screen
Time
16:9

3.2 Sound Menu
Sound Mode: Select Music, Movie, User (custom), Sports, or
Standard.
1.
Balance: Adjust the audio balance.3.
Auto Volume: Turn Auto Volume ON or OFF.4.
Surround Sound: Turn Surround Sound ON or OFF.5.
Treble, Bass: Set Sound Mode to "User" to adjust these settings.2.
Sound Mode Standard
Treble 50
Bass 50
Balance 0
Auto Volume
Surround Sound off
Select Menu Adjust
off
3.3 Options Menu
OSD Language: Select English, French, or Spanish for the On
Screen Display.
1.
Restore Factory Default: Reset the projector and restore all of
the default settings.
3.
Panel Flip Rotate: Flip and mirror the screen image.4.
INFO: Show the version.5.
Bluetooth: Turn Bluetooth ON or OFF.2.
Select Menu Adjust
OSD Language English
BlueTooth off
Restored Factory Default
Panel Flip Rotate 0
Info
Time
Time

3.4 Time Menu
Clock-- --
Select clock to Day, Month, Year, Hour ,and Minutes.
1.
On Time
Select turn on time to Day, Hour ,and Minutes.
3.
Sleep Timer
Select sleep timer to Off, 10min, 20min, 30 min, 60min,
4.
Auto Sleep
Select auto sleep function to Never, 4 hours, 6 hours, 8 hours.
5.
Off Time2.
Select Menu Adjust
Select turn off time to Day, Hour ,and Minutes.
90min, 120min,180min, 240min
Time
Clock -- -- -- --
Off Time off
On Time off
Sleep Timer off
Auto Sleep Never

Operation4
4.1 Power
Plug the AC/DC power adapter (included) into a standard wall
outlet and the DC power input on the rear of the unit. After
connecting power, please allow approximately 5 seconds to pass
before powering the unit ON.
4.2 Projector Placement
For best results, place the projector in a dark room or other dimly
lit area. Use the unit with a dedicated projector screen for best
picture resolution. If placing the projector behind the viewing
screen (unit in front of/projecting toward viewers), a special screen
will be required. Projector screens are not included. If you are not
using the unit with a screen, a smooth, white or lightly colored
surface will provide the best results.
THE CENTER
OF LENS
72
"
60
"
50
"
45
"
37
"
The projector can
display up to 150"

4.3 Viewing Options
The projector can be used to project onto a wall or screen,
mounted from the ceiling or on a table. When projecting from the
rear position, a special screen will be needed (not included) to
display the image.
Be sure to aim the remote at the sensor on the front or rear of
the projector.
REAR TABLE
REAR CEILING
FRONT TABLE
FRONT CEILING

4.4 Ceiling Mount
To mount the projector from the ceiling, you will need mounting
hardware recommended by a professional. Mounting
hardware and instructions are not included.
Before mounting, be sure the ceiling structure can support the
weight of the projector and the mount itself. It is
recommended to have this unit mounted by a professional.
Mounting Point
on bottom of
the projector
CEILING HANGER

Use the Angle Adjustment Dial to fine tune the angle.
4.5 Angle Adjustment
4.6 Image Adjustment
Keystone Adjustment
Adjust image corners to reduce
image distortion.
Focus Adjustment
Increase or reduce to image
size to sharpen image.
CAUTION

HDMI offers superior sound and picture quality, and is the easiest
way to play media from a computer, Blu-Ray player, or other
device with an HDMI output.
Requires an HDMI cable (included) and a device with an HDMI
output.
1. Using an HDMI cable, connect the HDMI 1 or 2 input on the
projector to the HDMI output on your media player or computer.
2. Set the projector's Source to the connected HDMI input and use
the controls on the connected device to select and play media.
You can also connect to your mobile device using a HDMI to
USB-C or Lightning Cable (not supplied).
4.7 HDMI
Connect to HDMI on
laptop or PC. Connect to HDMI on DVD,
Blu-Ray, or other source.
HDMI Inputs

1. Connect 3.5mm jack to the AV input of unit.
2. Connect RCA jack to stereo audio output and composite
video of the media player.
3. Set the projector's Source to AV and use the controls on the
connected player to select and play media.
Requires a 3.5mm to RCA audio/video cable (included).
4.8 Audio/Video Input
Connect AV cable (included) to
media player's AV outputs.
Audio Left Channel - White
Audio Right Channel - Red
Video - Yellow
AV IN

Supports AVI, MOV file formats.
1. Insert a USB drive into the USB Port.
2. Set the Source to Media Player, then use the Arrow buttons to
select "C:Drive" or "D:Drive" (C: Drive is USB, D: Drive is SD
card).
Note: Whichever is used first (USB or SD card) is designated
as the C Drive.
Note: Only certain video and audio formats are supported
when using a Hard Drive/USB/SD Card.
3. Use the Arrow buttons to select Music/Photo/Movie, then press
the OK button to begin playing content from the connected
storage device.
Supports Micro SD cards, external Hard Drives and USB flash
drives up to 32GB.
4.9 Micro SD & USB Storage Devices
USB Port Micro SD Card Slot

1. Using a VGA cable, connect the VGA input on the projector
to the VGA output on your computer.
2. Set the projector's Source to PC and use the controls on the
computer to select and play media.
Note: VGA connections do not support audio. You will need to
use the computer's speakers to hear audio.
Requires a VGA cable (not included) and a desktop PC or
laptop with a VGA output.
4.10 Computer Video (VGA)
PC with connected
speakers
Laptop with
built-in speakers
VGA Input
1. Enable Bluetooth on the external device (Bluetooth receiver) to
which you wish to connect.
2. Power on the projector and make sure the projector's Bluetooth
is ON (see note above). The projector will begin searching for
nearby Bluetooth devices to connect to, and will automatically
initiate pairing. Note: To eliminate confusion, disable Bluetooth
on all receivers to which you do not wish to connect.
NOTE: Bluetooth is OFF by default when the projector first powers
ON. Bluetooth can be turned ON or OFF from the OPTIONS Menu.
4.11 Bluetooth pairing to Wireless Speakers, Headphones or
a Sound Bar