Gordon 93520 User manual

®
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
Copyright
©
2005 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353.
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
CROSS-CUT PAPER SHREDDER
WITH BASKET
Model 93520
Due to continuing improvements, actual product may differ slightly from the product described herein.

For technical questions, please call 1-800-444-3353. Page 2
SKU 93520
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and as-
sembly diagram. Keep your invoice with this manual. Write the invoice number
on the inside of the front cover. Keep this manual and invoice in a safe and dry
place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1. Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
2. Do not operate Paper Shredders in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Paper Shredders create
sparks which may ignite the dust or fumes.
3. Keep bystanders, children, and visitors away while operating a Paper
Shredder. Distractions can cause you to lose control.
Wastebasket Capacity 4 Gallons
Strip Size 1/4” x 1-1/4”
Overall Dimensions 7-1/2” x 12-1/4” w x 13” H
Sheet Capacity 5 (#70WT.)
Power Source 110/120 VAC
Amperage 1.5
Cord Length 5 Feet

For technical questions, please call 1-800-444-3353. Page 3
SKU 93520
ELECTRICAL SAFETY
4. Grounded tools must be plugged into an outlet properly installed and
grounded in accordance with all codes and ordinances. Never remove the
grounding prong or modify the plug in any way. Do not use any adapter
plugs. Check with a qualified electrician if you are in doubt as to whether
the outlet is properly grounded. If the tools should electrically malfunction or
break down, grounding provides a low resistance path to carry electricity away
from the user.
5. Double insulated tools are equipped with a polarized plug (one blade is
wider than the other). This plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install a polarized outlet. Do not
change the plug in any way. Double insulation eliminates the need for the
three wire grounded power cord and grounded power supply system.
6. Avoid body contact with grounded surfaces such as pipes, radiators,
ranges, and refrigerators. There is an increased risk of electric shock if your
body is grounded.
7. Do not expose Paper Shredders to rain or wet conditions. Water entering a
Paper Shredder will increase the risk of electric shock.
8. Do not abuse the Power Cord. Never use the Power Cord to carry the tools
or pull the Plug from an outlet. Keep the Power Cord away from heat, oil,
sharp edges, or moving parts. Replace damaged Power Cords immedi-
ately. Damaged Power Cords increase the risk of electric shock.
9. When operating a Paper Shredder outside, use an outdoor extension cord
marked “W-A” or “W”. These extension cords are rated for outdoor use, and
reduce the risk of electric shock.
PERSONAL SAFETY
10. Stay alert. Watch what you are doing, and use common sense when oper-
ating a Paper Shredder. Do not use a Paper Shredder while tired or under
the influence of drugs, alcohol, or medication. A moment of inattention while
operating Paper Shredders may result in serious personal injury.
11. Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep your hair, clothing, and gloves away from moving parts. Loose
clothes, jewelry, or long hair can be caught in moving parts.

For technical questions, please call 1-800-444-3353. Page 4
SKU 93520
12. Avoid accidental starting. Be sure the Power Switch is off before plugging
in. Plugging in Paper Shredders with the Power Switch on, invites accidents.
TOOL USE AND CARE
13. Do not force the Paper Shredders. Allow the Shredder to work at its own
speed.
14. Do not use the Paper Shredder if the Power Switch does not turn it on or
off. Any Paper Shredder that cannot be controlled with the Power Switch is
dangerous and must be replaced.
15. Disconnect the Power Cord Plug from the power source before making any
adjustments, changing accessories, or storing the Shredder. Such preven-
tive safety measures reduce the risk of starting the Shredder accidentally.
16. Store idle Paper Shredders out of reach of children and other untrained
persons. Paper Shredders are dangerous in the hands of untrained users.
17. Maintain Paper Shredders with care. Keep blades sharp and clean. Prop-
erly maintained Shredders with a sharp cutting edge are less likely to bind and
are easier to control. Do not use a damaged tool. Tag damaged tools “Do not
use” until repaired.
18. Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the Shredder’s operation. If damaged,
have the Shredder serviced before using.

For technical questions, please call 1-800-444-3353. Page 5
SKU 93520
SERVICE
20. Service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.
21. When servicing a Shredder, use only identical replacement parts. Follow
instructions in the “Inspection, Maintenance, And Cleaning” section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES
1. Maintain labels and nameplates on the Paper Shredder. These carry impor-
tant information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
2. Keep Children Away. The paper shredder is not a toy.
3. Always keep the extension cord away from moving parts on the Shredder.
4. Avoid unintentional starting. Make sure you are prepared to begin work
before turning on the Paper Shredder.
5. Do not force the Paper Shredder. This Paper Shredder has a two minute on,
four minute off cycle. If it is not observed, it may overheat or blow the fuse. Also,
observe the five sheet maximum. Overloading may damage the unit.
6. Never leave the Paper Shredder unattended when it is plugged into an
electrical outlet. Turn off the Shredder, and unplug it from its electrical outlet
before leaving.
7. Do not put paper with paperclips, staples, or folds through the Paper
Shredder. Doing so will damage the unit.
8. Do not come in contact with the blades. The Blades on the underside of the
unit are extremely sharp and will cause extensive physical damage.
9. WARNING! People with pacemakers should consult their physician(s)
before using this product. Electromagnetic fields in close proximity to a heart
pacemaker could cause interference to or failure of the pacemaker.

For technical questions, please call 1-800-444-3353. Page 6
SKU 93520
GROUNDING
WARNING!
Improperly connecting the grounding wire can result in the risk of electric
shock. Check with a qualified electrician if you are in doubt as to whether the
outlet is properly grounded. Do not modify the power cord plug provided with
the tool. Never remove the grounding prong from the plug. Do not use the
tool if the power cord or plug is damaged. If damaged, have it repaired by
a service facility before use. If the plug will not fit the outlet, have a proper
outlet installed by a qualified electrician.
GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS
1. Tools marked with “Grounding Required” have a three wire cord and three prong
grounding plug. The plug must be connected to a properly grounded outlet. If
the tool should electrically malfunction or break down, grounding provides a low
resistance path to carry electricity away from the user, reducing the risk of elec-
tric shock. (See Figure A.)
2. The grounding prong in the plug is connected through the green wire inside the
cord to the grounding system in the tool. The green wire in the cord must be the
only wire connected to the tool’s grounding system and must never be attached
to an electrically “live” terminal. (See Figure A.)
3. Your tool must be plugged into an appropriate outlet, properly installed and
grounded in accordance with all codes and ordinances. The plug and outlet
should look like those in the following illustration. (See Figure A.)
FIGURE A

For technical questions, please call 1-800-444-3353. Page 7
SKU 93520
FIGURE B
DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS
4. Tools marked “Double Insulated” do not require grounding. They have a special
double insulation system which satisfies OSHA requirements and complies with
the applicable standards of Underwriters Laboratories, Inc., the Canadian
Standard Association, and the National Electrical Code. (See Figure B.)
5. Double insulated tools may be used in either of the 120 volt outlets shown in the
following illustration. (See Figure B.)
EXTENSION CORDS
1. Grounded tools require a three wire extension cord. Double Insulated tools
can use either a two or three wire extension cord.
2. As the distance from the supply outlet increases, you must use a heavier gauge
extension cord. Using extension cords with inadequately sized wire causes a
serious drop in voltage, resulting in loss of power and possible tool damage.
(See Figure C, next page.)
3. The smaller the gauge number of the wire, the greater the capacity of the cord.
For example, a 14 gauge cord can carry a higher current than a 16 gauge cord.
(See Figure C.)
4. When using more than one extension cord to make up the total length, make
sure each cord contains at least the minimum wire size required.
(See Figure C.)
5. If you are using one extension cord for more than one tool, add the nameplate
amperes and use the sum to determine the required minimum cord size.
(See Figure C.)

For technical questions, please call 1-800-444-3353. Page 8
SKU 93520
6. If you are using an extension cord outdoors, make sure it is marked with the
suffix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use.
7. Make sure your extension cord is properly wired and in good electrical condition.
Always replace a damaged extension cord or have it repaired by a qualified
electrician before using it.
8. Protect your extension cords from sharp objects, excessive heat, and damp or
wet areas.
SYMBOLOGY
Double Insulated
Canadian Standards
Association
Underwriters
Laboratories, Inc.
Volts Alternating Current
Amperes
No Load Revolutions
per Minute (RPM)
noxxxx/min.
A
V ~
RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS*
(120 VOLT)
NAMEPLATE
AMPERES
(At Full Load) EXTENSION CORD LENGTH
25 FEET 50 FEET 75 FEET 100 FEET 150 FEET
0 - 2.0 18 18 16 16 16
2.1 - 3.4 18 18 16 14 14
3.5 - 5.0 18 18 16 14 12
5.1 - 7.0 18 16 14 12 12
7.1 - 12.0 16 14 12 10 -
12.1 - 16.0 14 12 10 - -
16.1 - 20.0 12 10 - - -
FIGURE C *Based on limiting the line voltage drop
to five volts at 150% of the rated amperes.

For technical questions, please call 1-800-444-3353. Page 9
SKU 93520
UNPACKING
When unpacking, check to make sure that the product is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as possible.
ASSEMBLY AND OPERATING INSTRUCTIONS
CAUTION: Always make sure the Power Cord of the Paper Shredder is un-
plugged from its electrical outlet prior to installation.
Switch
FIGURES 1 and 2
Close up showing how the
Paper Shredder fits on top
of the Wastebasket.
CAUTION: Always use this Paper Shredder with the accompanying wastebasket.
Using the Paper Shredder without the wastebasket or with another wastebasket
will expose the operator to very sharp blades. As a safety feature, this Shredder
is designed not to operate unless it is seated on its basket.

For technical questions, please call 1-800-444-3353. Page 10
SKU 93520
1. Set the Paper Shredder on the Wastebasket as shown in FIGURES 1 and 2on
page 9. Make sure not to come in contact with the blades under the plastic trap
door. When the unit is on the Wastebasket, the trap door will open exposing the
blades. See FIGURE 3.
Caution!! Make sure clothing or long hair stay clear of the unit.
2. Plug in the unit and turn the Switch to the AUTO position. The ready light must
be lit to proceed. This unit has an automatic feeding feature. Insert a piece of
paper into the Feed Slot until the Paper Shredder grabs the paper and draws it
in. This unit will shred up to five pieces of paper at once.
Note: If you want to back out a piece of paper that is in the unit, turn it off, then turn the
Switch to REVERSE.
Note: Paper jamming and the machine stopping may be an indication that too much
paper has been inserted. Set the switch to reverse and remove excess paper. Turn the
unit off and allow it to cool before restarting.
3. When you are finished shredding, turn off the unit and unplug it from the power
outlet.
FIGURE 3
Caution: Do not put paper with paper clips, staples, or folds through the Paper
Shredder. Doing so will damage the unit.
Bottom View of Paper Shredder
Blades behind
plastic trap door.
Caution! This Paper Shredder has a two minute on, four minute off cycle. If it is not
observed, it may overheat or blow the fuse. Also, observe the five sheet maximum.
Overloading may damage the unit