
AS A PERSONAL BLENDER:
Make healthy smoothies and juices everywhere you go.
1. Attach the cross blade attachment by pushing the attachment into power handle
and twisting until it clicks in place.
2. Place the blender bottle on a at, secure surface.
3. Add chopped ingredients to the blender bottle.
Note: Do not ll the blender bottle beyond the Maximum ll line.
4. Insert the cross blade attachment into the blender bottle and turn the attachment
clockwise to secure it to the bottle.
5. Plug the blender into the electrical outlet.
6. With the bottle in one hand, use the other hand to press and hold the On/O button
on the power handle.
For additional speed, press and hold the Turbo button.
7. When you are nished blending the ingredients, release the button.
8. Unplug the blender.
9. Twist the power handle counter-clockwise to release it from the bottle.
AS A HANDHELD BLENDER:
Using the blender attachment, you can easily puree soups and sauces directly in the
bowls and pots.
1. Attach the blender shaft attachment with the cross blade by pushing the attachment
into power handle and twisting until it clicks in place.
2. Plug the blender into the electrical outlet.
3. Place a bowl on a at, secure surface and add chopped ingredients.
4. On the top of the power handle, set the speed setting
Note: It is recommended that you begin on a low speed to avoid splashing.
5. Insert the cross blade attachment into the bowl with the ingredients.
6. Securing the bowl with one hand, use the other hand to press and hold the On/O
button on the power handle.
For additional speed, press and hold the Turbo button.
7. Move the blender around the bowl to blend all of the ingredients. When you are
nished blending the ingredients, release the button.
8. Unplug the blender.
10
OPERTING & CLEANING
11
CLEANING THE BLENDEROPERATING
CLEANING
• Unplug the blender before cleaning.
• Wash all accessories and attachments with warm, soapy water. Be especially
careful when handling the blades—always hold these parts by the plastic.
• Wipe the outside of the power handle with a soft, damp cloth.
• Dry all parts thoroughly.