GoVideo PVP4040 Pocket Cinema User manual

PersonalVideo Player
User’s Guide
PVP4040
WWWGOVIDEOCOM

2
Warning
Safety Instructions
Safety Instructions
2
Please read the following safety instructions before using the player.
• Do not overload electrical outlets,as this may result in excessive heat and/or fire.
• Do not bend the power cord or allow it to be crushed by heavy objects,as this may increase the
risk of fire.
• Do not handle the power plug with wet hands,as this may result in electric shock.
• Make sure the power plug is fully inserted,as a loose connection may increase the risk of fire.
• Never disassemble or modify the player in any way.
• Do not allow chemicals,such as benzene or thinner, to come in contact with the player.
• Do not use the player near a magnet or other strong magnetic field.
• Do not allow dirt or foreign objects to enter the player.
• Avoid using the player in environments with high temperatures (>104°F),low temperatures
(<41°F),or high humidity.
• Do not drop the player or expose it to excessive shock or vibration.
• Interference from electromagnetic waves may damage the player.Be sure to fully extend the
adapter cable before using it.
• Avoid using the player in direct sunlight or near any heat generating device.
• Avoid using the player in excessively dirty or dusty environments.
• Unplug the power cord when cleaning the adapter.
• Do not drop the adapter or expose it to excessive shock or vibration.
• Use only the adapter supplied with this player.
Caution
Notes when using earphones
Traffic safety
• Do not use the earphones while riding a bicycle or driving a car or motorcycle.It is not only dangerous,
but may also be illegal depending on the region.To avoid personal injury, do not use the earphones
while walking near roads,intersections, crosswalks,etc.
Avoid high volume
• Do not use the earphones continuously at high volumes,as it could be harmful to your hearing.
• If your ears ring,turn down the volume or stop using the earphones.
Environmental information
• Separate packing materials, batteries,and electronic products when not in use.
• Packing materials are classified into cardboard,polyethylene, etc.No unnecessary packing materials
have been used for this player.

3
Table of Contents
Table of Contents
3
Player Overview ............................................................................................................................................................................ 4
Viewing/Recording from an External Source .................................................................................................................... 6
Watching Movies .......................................................................................................................................................................... 7
Viewing Images............................................................................................................................................................................. 8
Listening to Music ........................................................................................................................................................................ 9
Using the Setup Menu ............................................................................................................................................................. 10
Connecting an External Source or PC ................................................................................................................................. 13
Using theTranscoding Software........................................................................................................................................... 14
Charging the Battery................................................................................................................................................................. 18
Troubleshooting ......................................................................................................................................................................... 19
Specifications .............................................................................................................................................................................. 20
Warranty......................................................................................................................................................................................... 21
Accessories
User's Guide Rechargeable
Lithium Ion Battery Power Cable
Audio/Video Cable USB Cable AC Adapter
Earphones Ring Stand Carrying Case
Audio Cable
Installation CD
(Transcoder Software)

4
Player Overview
Overview
4

  









0%23/.!,!62%#/2$%20,!9%2


'O6IDEO0ERSONAL!62ECORDER0LAYER
-ODEL060
WWWGOVIDEOCOM
-!$%).#().!

5
Overview
5
1 LCD Screen
Displays the player’s status,menus,and media
files.
• Use the LCD ON/OFF switch to temporarily turn
off the LCD Screen to save battery life (see #16
below).
2 Charge indicator
Lights when the player’s battery is charging.Turns
off when the battery is fully charged. To charge
the battery:
• Connect the supplied AC Adapter to the player’s
DC In jack and plug it in.
OR
• Connect the player to a PC using the supplied
USB cable.
3 REC button
Starts recording from an external source
connected to the player’s AV In jack.
4 REPEAT button
Selects one of the player’s built-in repeat modes.
• You can also press and hold REPEAT to mark all
files for deletion.Then press STOP to delete all
marked files.
5 MENU button
Displays the player’s Main menu.
6 VOLUME/SLIDE TIME -/+ buttons
Adjust the player’s volume.Also use to set the
slide show interval from 2~30 seconds.
7 POWER/STOP button
Press to turn the player on.Press and hold to turn
the player off.Also use to stop playback.
8 SELECT control
The SELECT control has three positions (left,right,
and down) and a variety of uses:
• MENU NAVIGATION - Press left/right to browse
menu options.Press down to make selections.
• PLAY/PAUSE - Press down to play or pause the
selected file.
• SKIP PREV/NEXT - Press left/right during
playback to skip to the previous or next file.
• REWIND/FF - Press and hold left/right during
playback to scan backward or forward at
variable speeds.
• DELETE - Press and hold down to mark the
selected file for deletion.Then press STOP to
delete all marked files.
9 AV IN jack
Use to connect an external source (such as a DVD
player,VCR or camcorder),using the supplied
Audio/Video cable.
10 DC IN jack
Use to connect the supplied AC Adapter.
• The internal battery will charge whenever the
player is connected via the AC Adapter.
11 SD CARD slot
Use to insert an external SD memory card.
• SD (Secure Digital®) cards are high capacity
memory cards used to store video,audio,and
image files.
• To view the contents of your SD card,you must
switch the player from Internal to Extended
memory mode;see page 11.
12 Rechargeable Battery slot
Use to insert or remove the supplied lithium ion
battery.
• Pay attention to the correct polarities when
inserting the battery.
13 USB Connection jack
Use to connect the player to your PC to:
• Add media files to the player.
• Charge the battery.
14 NTSC/PAL switch
Selects your desired display system (NTSC or PAL).
• NTSC is the standard used in the United States.
15 HOLD switch
Temporarily locks all buttons on the player to
prevent accidental operation while walking,
jogging,etc.
16 LCD ON/OFF switch
Turns the LCD screen on and off.This is useful to
save battery life while listening to MP3 files.
17 Headphone jack
Use to connect the headphones/earphones.
18 60°TILT
Use to insert the loop on the supplied ring stand.
Allows the player to sit on a table at a comfortable
viewing angle.
19 30°TILT
Use to insert the loop on the supplied ring stand.
Provides an alternative viewing angle.

6
Operation
Viewing an External Source
INPUT MODE
Recording from an External Source
6
You can use the player to view and record* from an external source,such as a DVD player,VCR,camcorder,or
portable CD player. To connect your external source,see page 13.
1 Use the SELECT control to highlight and select the“INPUT MODE”icon.
• Playback from your external source connected to the AV IN jack will be displayed on
the LCD screen.
2 When finished,press the MENU button to exit.
• The Main menu will be displayed.
1 Press the REC button.
2 Use the SELECT control to highlight and select the icon for the type of file you
want to record (Video,Image or MP3).
• The recording screen will appear and recording will start.
• If no video signal is detected,MP3 recording mode will be activated automatically.
3 To stop recording,press the STOP button.
• The new file will automatically be added to your player’s memory; see pages 7-9.
* This player will not record Macrovision® copy-protected source material.If copy-
protection is detected,you will not be able to record from your external source.
Note

7
VIDEO
FREE/TOTAL
IN: 71/124MB
EX: NO CARD HIGH OFF
REC MODE REPEAT VOLUME
2.3 MB
00 :30 : 30
VIDEO001.ASF
VIDEO002.ASF
VIDEO003.ASF
VIDEO004.ASF
VIDEO005.ASF
1 Use the SELECT control to highlight the video file you wish to delete.
2 Press and hold the SELECT control for two seconds to mark the file for deletion.
• An“X”will appear next to the file to indicate that it is marked for deletion.
• To mark all files for deletion,press and hold the REPEAT button for two seconds.
3 Press the STOP button to confirm deletion of the selected file(s).
• Note:You can use the procedures in step 2 to unmark previously marked file(s).
Press the REPEAT button.
• The Repeat mode will change as follows:
ONE: Repeats the current video file.
ALL:Repeats all files in the video list.
OFF: Disables Repeat mode.All files in the video list will play through once.
Deleting Video Files
Watching Movies
Operation
VIDEO LIST
7
3 When finished,press the MENU button to exit.
• The Main menu will be displayed.
1 Use the SELECT control to highlight and select the“VIDEO LIST”icon.
• A list of video files in the built-in memory or currently loaded SD card will appear.
2 Use the SELECT control to highlight and select the desired video file.
• The selected video file will play.
• Press the SELECT control left or right to skip to the previous or next video file.
• Press and hold the SELECT control left or right to scan backward or forward during
playback.
• Press the STOP button to stop playback and return to the video list.
• During video playback,press the RECORD key to display an elapsed time counter on
the LCD screen.
Repeating Playback
You can use the player to watch video clips copied to the player in AVI format (MPEG-4 video with MP3 audio).If
you have video files in other formats,you can use transcoding software to convert the files to AVI format.

8
1 Press the REPEAT button to select "SLIDE" mode.
2 Use the SLIDETIME +/– buttons to select the interval between each image.
• Choose from 2 to 30 seconds.
• The default slide time is 3 seconds.
1 Use the SELECT control to highlight and select the“IMAGE LIST”icon.
• A list of JPEG files in the built-in memory or currently loaded SD card will appear.
2 Use the SELECT control to highlight and select the desired JPEG file.
• The selected JPEG file will be displayed on the LCD screen.
• Press the SELECT control left or right to skip to the previous or next image.
• Press the STOP button to return to the JPEG list.
Viewing Images
Operation
8
IMAGE LIST
Setting Up a Slide Show
3 When finished,press the MENU button to exit.
• The Main menu will be displayed.
JPEG
FREE/TOTAL
IN: 71/124MB
EX: NO CARD HIGH NONE
00 SEC
REC MODE REPEAT VOLUME
41 KB
1024 x 768
Image1.JPG
Image2.JPG
Image3.JPG
Image4.JPG
Image5.JPG
Deleting Images
1 Use the SELECT control to highlight the JPEG file you wish to delete.
2 Press and hold the SELECT control for two seconds to mark the file for deletion.
• An“X”will appear next to the file to indicate that it is marked for deletion.
• To mark all files for deletion,press and hold the REPEAT button for two seconds.
3 Press the STOP button to confirm deletion of the selected file(s).
• Note:You can use the procedures in step 2 to unmark previously marked file(s).
You can use the player to browse images copied to the player in JPEG format or on an SD card from a digital
camera.

9
Press the REPEAT button.
• The Repeat mode will change as follows:
ONE: Repeats the current MP3 file.
ALL:Repeats all files in the MP3 list.
OFF: Disables Repeat mode.All files in the MP3 list will play through once.
Listening to Music
Operation
9
MP3 LIST
1 Use the SELECT control to highlight and select the“MP3 LIST”icon.
• A list of MP3 files in the built-in memory or currently loaded SD card will appear.
2 Use the SELECT control to highlight and select the desired MP3 file.
• The selected MP3 file will play.
• Press the SELECT control left or right to skip to the previous or next track.
• Press the STOP button to stop playback and return to the MP3 list.
3 When finished,press the MENU button to exit.
• The Main menu will be displayed.
MUSIC
AUDIO001.MP3
FREE/TOTAL
IN: 71/124MB
EX: NO CARD
32KHz
96Kbps
STEREO
REC MODE REPEAT VOLUME
32.0KHz
96Kbps
4.0MB
0 :05 : 30
0 :00 : 00
AUDIO001.MP3
AUDIO002.MP3
AUDIO003.MP3
AUDIO004.MP3
AUDIO005.MP3
Deleting MP3 Files
1 Use the SELECT control to highlight the MP3 file you wish to delete.
2 Press and hold the SELECT control for two seconds to mark the file for deletion.
• An“X”will appear next to the file to indicate that it is marked for deletion.
• To mark all files for deletion,press and hold the REPEAT button for two seconds.
3 Press the STOP button to confirm deletion of the selected file(s).
• Note:You can use the procedures in step 2 to unmark previously marked file(s).
Repeating Playback
You can use the player to listen to music files copied to the player in MP3 (MPEG-2 Layer 3) orWMA (Windows
Media Audio) format.

10
1 Use the SELECT control to highlight and select the“SETUP MENU”icon.
• The player’s Setup menu will appear.
2 Use the SELECT control to highlight and select from the following menu headers:
GENERAL: Memory,Language,Power Save,Reset,and Upgrade settings (page 11)
RECORD:MPEG4 and MP3 Record Quality settings (page 11)
MEMORY: Internal/Extended Memory Format settings (page 12)
PICTURE:Brightness and Contrast settings (page 12)
EXIT: Exit and return to the Main menu (page 12)
3 Use the SELECT control to highlight and select the desired submenus and spe-
cific menu options.
4 Press the STOP button to return to the Setup menu.
5 Press the MENU button to return to the Main menu.
Using the Setup Menu
Operation
10
Navigating the Setup Menu
GENERAL GENERAL
MEMORY
LANGUAGE
POWER SAVE
RESET
UP GRADE
MEMORY
LANGUAGE
POWER SAVE
RESET
UP GRADE
INTERNAL
EXTENDED
The Setup menu allows you to control advanced features of your player.

11
Operation
11
MEMORY
Use to set the player to Internal or Extended (SD card) memory mode:
• INTERNAL:Use when playing,recording,deleting or formatting the
contents of the built-in memory.An SD card loaded in the player will
not be accessible.
• EXTENDED:Use when playing,recording,deleting or formatting
the contents of an SD card loaded in the player. The player’s built-in
memory will not be accessible.
LANGUAGE
• Selects a language for the player’s on-screen displays and menus.
POWER SAVE
• Conserves battery life by having the player turn off automatically if it
is left in Stop mode for five minutes.
RESET
• Restores all player settings to their factory defaults.
UPGRADE
Firmware upgrades may be available from time to time to add
functionality to the player. Check www.govideo.com for details.
1 Download the firmware upgrade file.
2 Connect the player to your PC with the supplied USB cable.
3 Copy the firmware upgrade file to the player.
4 Disconnect the player from the USB cable.
5 Select UPGRADE in the General Setup menu to upgrade the
firmware.
GENERAL SETUP
GENERAL SETUP
MEMORY
LANGUAGE
POWER SAVE
RESET
UP GRADE
INTERNAL
EXTENDED
MPEG4
Use to set the picture quality for video recording.
• FINE: Best quality (~30 minutes* using the built-in memory)
• NORMAL:Good quality (~50 minutes* using the built-in memory)
• ECONOMY:Average quality (~110 minutes* using the built-in
memory)
* Recording time may vary depending on the video signal.
MP3
Use to set the sound quality for audio recording.
• SAMPLE RATE/BIT RATE:Sets the desired sample rate and bit rate
for MP3 recording (the higher the rate,the higher the sound quality
and file size).
• CHANNEL:Sets the player to record MONO (1 channel) or STEREO (2
channel) audio during recording.
RECORD SETUP
RECORD
MPEG4
MP3
FINE
NORMAL
ECONOMY

12
Using the Setup Menu
Operation
12
Use to exit the Setup menu and return to the Main menu.
SETUP EXIT
SETUP EXIT
FORMAT
Use to format (erase) the contents of the player’s Internal or Extended
(SD card) memory.
• INTERNAL:Deletes all files in the player’s built-in memory.
• EXTENDED:Deletes all files on the external SD card.
MEMORY FORMAT
MEMORY FORMAT
FORMAT INTERNAL
EXTENDED
BRIGHTNESS
• Use to adjust the brightness of the LCD screen.
CONTRAST
• Use to adjust the contrast of the LCD screen.
DISPLAY
BRIGHTNESS
CONTRAST
LCD BRIGHTNESS SETUP
DISPLAY SETUP

13
Connecting an External Source or PC
Connections
13
Connecting an External Audio/Video Source
• Connect the supplied Audio/Video or Audio cable from your external source to the AV In jack on the
right side of the player.
• Switch to“INPUT MODE”on the Main menu to view and record from your external source (see page 6).
• Connect the supplied USB cable between the player and a PC running Windows ME®,Windows 2000®,
or Windows XP®.
• After the player is recognized by your PC,double-click My Computer and browse to the player (which
appears as a portable disc) using Windows Explorer® .
• Move,copy,and/or delete files from the player using the same methods you would use with any
external drive in Windows®.
External Audio/Video Source
Audio/Video Cable
Connecting a PC
PC
USB cable
• The player’s controls will not function
while it is connected to your PC.
• Be sure to disconnect the USB
cable after you are finished moving,
copying,or deleting files between the
player and your PC to resume normal
player operation.
Note
Connect the player to an external source device (such as a DVD,VCR,camcorder or portable CD player) to watch or
record audio/video clips.Connect the player to a PC to transfer media files (AVI,JPEG,and MP3 files) to the player.
External Source
Personal
Video
Player
Audio/Video Cable
External Audio Source
Audio Cable

14
Installing the Transcoder Software
System Requirements
PC requirements
• PC with Pentium III 1GHz processor or higher
• 256MB RAM or higher
• VGA adapter with Microsoft DirectX® support
• Sound card (required)
• Microsoft® Windows® ME®,Windows 2000®,
Windows XP®
• Microsoft DirectX® 8.0 or later
• Microsoft Windows Media Player® 9.0
The supplied CD includes specialTranscoder software and codecs that allow you to convert your movie files to a
format that is recognized by the player.
Follow the steps below to install the Transcoder
software and other required codecs.You must
have an Internet connection established on
your PC in order to complete the installation.
1 Insert the supplied installation CD.
2 The main installation screen is displayed.
• If you do not see the screen at right, click
START> RUN,and then browse to
“autorun.exe”and click OK.
3 You MUST INSTALL each of the following
items by clicking its link and following the
on-screen instructions:
• DivX 5.11 Codec (Internet connection
required) -When the File Download box
appears,click Open to download and
launch the installer.
• Multi-Codec Pack (Internet connection
required) -When the File Download box
appears,click Open to download and
launch the installer.
• Windows Media Player 9.0 (Internet
connection required) - Connects you to
the Microsoft website where you can
download the latest version of Windows
Media Player for your operating system.
• Direct X 9.0 (Internet connection
required) - Follow the on-screen wizard to
install.
• MediaTranscoder - This is the master
application that converts media file
formats to be compatible with the player.
Follow the Installation Wizard to install.
Software Installation
4 When all applications and codecs have
been installed,select“Exit”to exit the
installer.
5 Launch theTranscoder software.
• Select START > Programs > Transcoder >
Transcoder.
or
• Double-click the Transcoder icon on the
Windows desktop.
About Codecs
• Codec stands for“code/decode”and refers to the
conversion of files from one format to another.
• The player will only recognize AVI and ASF files
with MPEG-4 Video and MP3 Audio.
• The suppliedTranscoder software will convert
the following files into a format compatible with
the player: WMV,ASF,AVI,MPEG,MPG,WMA.
Other CD Options
Try these links on the installer screen for advanced
help and other CD options:
• User’s Guide - Links to a PDF of the player’s
User’s Guide.
• Q & A - Links to common questions about
Transcoder operation.
• Install Guide - Links to detailed instructions on
software installation.
• Browse CD - Allows you to browse the contents
of the CD,including sample media files.
Transcoder Software

15
Transcoder Overview







1 Menus
Click to view File,Build,Option,and
Help menu options.
2 Tool Bar
Click to select New,Open,Save,and
Build options.
3 File SearchWindow
Use to browse drives and directories
on your PC.
4 File ListWindow
Use to list files on your PC.Drag movie
files that you want to convert from
this window to theTranscoded Files
window (see #5).
5 Transcoded FilesWindow
Displays the movie files to be
transcoded.
6 Save File Path
Indicates the directory where
transcoded movies are saved.To specify
this directory,select Option > SaveFile
Path.
7 Available Space Indicator
Indicates the amount of available space
and the total space in the selected
directory.
8 Transcoding Progress Indicator
Graphically displays the progress of the
transcoding.
Transcoder Software

16
Menu & Tool Bar Options
Transcoder Software
File
• New schedule:Creates a new list of transcoded files.
• Open schedule:Opens a saved list of transcoded files (with the
extension *.dmt).
• Save:Saves the current list of transcoded files to a *.dmt file.
• Save As:Saves the current *.dmt file to a new file name.
• Exit:Exits the Transcoder software.
Menu Options
Tool Bar Options
Build
• Trans:Starts transcoding all files that have been dragged and
dropped to theTrancoded Files window.
Option
• Sami:Select to include closed caption files,if available for your
media files.
• Media File:Only displays media files in the File List window.
• Media Info:Only displays media files which do not require
transcoding in the File List window.
• Refresh:Refreshes the screen to display any changes.
• SaveFile Path:Allows you to specify the directory where transcoded
video files will be saved.
Help
• About:Displays theTranscoder software version information and
website.
New Schedule
• Creates a new list of transcoded files.
Open Schedule
• Opens a saved list of transcoded files (with the extension *.dmt).
Save As
• Saves the current *.dmt file to a new file name.
Build
• Starts transcoding all files that have been dragged and dropped to
the Trancoded Files window.

17
Transcoding Files
Transcoder Software
1 Search for Files
Select the directory in the File Search window where the file(s) you wish
to trancode are located.
2 Drag and Drop Files
Drag and drop the file(s) to be transcoded from the File List window to
the Transcoded Files List window as shown.
3 Start Transcoding
Click the Build button on the tool bar (or select Build > Trans) to
begin transcoding the selected files.
4 Wait for Transcoding
The progress bar will indicate the percentage complete.
5 Check File
When transcoding is complete, check the icon to the left of the file
name:
• If a green icon appears,the file was successfully transcoded.
• If a red icon appears,the file was not successfully transcoded.
• If transcoding fails repeatedly,try reinstalling the transcoder and
codecs.
6 Download File
The transcoded file will be saved in the directory specified in the
Option > SaveFile Path menu.
• Double-click the file to play it inWindows Media Player.
• Connect the player to your PC with the supplied USB cable and copy
your transcoded video files to the player.







1818
Charging the Battery
Miscellaneous
Battery and Power
About the Rechargeable Battery
• The supplied lithium ion battery requires approximately two hours to fully charge from a completely
discharged state.
• Battery life ranges from two hours for video playback (with the LCD Screen on) to four hours for MP3
playback (with the LCD Screen off).
• For your convenience,you can charge the player using either the supplied USB cable or AC Adapter.
Charging with the USB cable
• Turn off the player.
• Connect the supplied USB cable between the player and your PC.
• The Charge indicator on the top of the player will remain lit during charging.After charging is complete,
the indicator turns off.
Charging with the AC adapter
• Connect the supplied AC Adapter to the DC In jack on the right side of the player.
• The battery will charge whether the player is on or off.
• The Charge indicator on the top of the player will remain lit during charging.After charging is complete,
the indicator turns off.
Cautions on use
• If you disconnect the USB cable while a file transfer is in progress,the file may be damaged.Be sure to
wait until the“USB CONNECTEDTRANSFERRING FILES”message disappears from the LCD screen before
unplugging the USB cable.
• Be careful not to connect the AC adapter to the AV IN jack.
• Do not remove the SD card while a file is playing.
• This player is designed to work with USB 2.0,but USB 1.1 is also supported.
• Player operation is limited when the USB cable is connected.
• Do not remove the battery while a file is playing or recording.
• Turn off the player before charging it with the USB cable.

1919
Miscellaneous
Helpful Tips
Symptom
Player will not power on.
Playback is distorted when viewing
an external source connected with
the A/V cable.
Sound from earphone jacks is low
or distorted.
Charging does not work or the
Charge indicator does not light.
External memory (SD card) is not
recognized.
A downloaded video file does
not play.
Device does not show up as a
removable drive inWindows
Explorer.
Solution
• Make sure the battery is installed or the AC adapter is connected.
• The battery may be discharged.If so,recharge it using the AC
adapter or USB cable.
• Make sure the HOLD switch is set to the OFF position.
• Make sure the LCD ON/OFF switch is set to the ON position.
• Press the POWER button.
• Make sure the A/V cable is properly connected.
• Check the NTSC/PAL switch.
• Check the volume level .
• Check the earphone connection.If there is dirt or foreign material
in the terminal,noise may occur.
• If the playback file is damaged,noise may occur or sound may be
interrupted.Try playing another file.
• Check the AC Adapter connections.
• Make sure the battery is installed correctly,paying attention to
the correct polarities (+ and -) as marked on the rear of the unit.
• Make sure the SD card is inserted properly.
• Check for theWRITE PROTECT tab on the SD card.
• This player supports only“FAT and FAT16”formats.
• Play the video file after correcting it using the Transcoder
software.
• Windows automatically assigns drive letters consecutively for
physical devices (such as hard drives,CD-ROM drives,Zip drives,
USB devices,etc.) starting with the letter C:.
• Check to make sure you do not have a resource conflict with
a mapped network drive. If you have a mapped network drive
assigned to the next available physical drive letter,the player will
not show up.To resolve the conflict,it is recommended that you
reassign the conflicting mapped drive to a higher letter in the
alphabet.
Troubleshooting

2020
Specifications
Miscellaneous
PVP4040
3.8”(96mm) x 0.7”(18mm) x 3.1”(79mm)
With battery:4.7 oz.(133g)/Without battery:3.8 oz.(107g)
20Hz ~ 20KHz
20mW,Impedance:16ohm
90dB or larger (based on MP3)
Video: MPEG-4 (320x240 resolution, 24fps max)
Audio:MP3 (32Kbps,16Khz)
MP3 (ID3 Tag ver 1.1,64-128kbps,24-44.1Khz)
JPEG (Decoding:No limitation;Capture:640x480))
MPEG-4/MP3,Extension = asf
MP3
110 minutes
50 minutes
30 minutes
3.5" ColorTFT LCD,480 x 240 Dot
NTSC/PAL (selectable)
USB 2.0
128MB FLASH MEMORY
SD card slot (8MB ~ 1GB)
Video playback:two hours
Audio playback:four hours (LCD OFF mode)
DC 5V 2.0A adaptor
DC 3.7V,1100mA lithium ion battery
Windows ME/Windows 2000/Windows XP
Pentium III 1GHz or better
256MB
Model
Size (Wx D x H)
Weight
Frequency characteristics
Audio Headphone output
S/N
AV Files
MP3 Files
Image Files
Encoding Video/Audio
Audio
ECONOMY
NORMAL
FINE
Picture display
PC connection
Built-in
Extended
Battery use time
Power specification
OS
CPU
Memory
Supported Files
Recording Time
(Based on Built-in
Memory)
Recommended
system
specifications
Memory Type