GPX HTB037 User manual

Overview
29” Soundbar with Bluetooth Wireless
User’s Guide for Model HTB037 v1886-01
FCC WARNINGS
Warning: Changes or modications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
ADDITIONAL WARNINGS
• WARNING: Changes or modications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
• WARNING: Shock hazard - Do Not Open.
• Caution and marking information is located at the rear or bottom of the apparatus.
• Mains plug is used as disconnect device and it should remain readily operable during intended use. In
order to disconnect the apparatus from the mains completely, the mains plug should be disconnected
form the mains socket outlet completely.
• CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
• Objects lled with liquids, such as vases, shall not be placed on the apparatus
• WARNING: Do not place this unit directly onto furniture surfaces with any type of soft, porous, or
sensitive nish. As with any rubber compound made with oils, the feet could cause marks or staining
where the feet reside. We recommend using a protective barrier such as a cloth or a piece of glass
between the unit and the surface to reduce the risk of damage and/or staining.
• WARNING: This product may contain chemicals known to the State of California to cause birth
defects, or other reproductive harm (California Prop 65). Wash hands after handling.
• This product meets and complies with all Federal regulations.
LINE IN
SOURCE
PAIR
VOL +
VOL –
AUX
LINE IN
Power/Source
Press to power ON.
Press and hold to power OFF.
Press to change audio source.
Volume +/-
Press to adjust the volume up or down.
Pair
Press to begin pairing to a Bluetooth device.
Aux In
Requires RCA stereo
audio cable (included).
Line In
Requires 3.5mm audio
cable (not included).
DC Power Port
Remote requires 1 CR2025
button cell battery (included).
Side Controls & Input Rear Inputs
Power
Press to power ON/OFF.
Mute
Press to mute audio.
Aux/Line In
Press to switch to Aux or Line In mode.
Volume -/+
Bluetooth
Press to switch to Bluetooth mode.
Remote does not initiate pairing, use
Pair button on speaker.
Skip Back/Fwd
In Bluetooth mode, press to skip the
selected track.
Play/Pause
In Bluetooth mode, press to play or
pause the selected track.

Power
Plug the power cord (included) into the DC Input on the back of the unit and a
standard wall outlet.
To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support
section at: www.gpx.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la
sección de apoyo en: www.gpx.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions
fréquemment posées, consultez la rubrique d’assistance sur: www.gpx.com
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.gpx.com
Customer Service: 1-888-999-4215 | Email Support: [email protected] | Email Parts: par[email protected]
Copyright © 2017 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their
respective owners. Specications are subject to change without notice.
INTERNATIONAL SUPPORT
Protect for Today
Sustain for Tomorrow
Made
Green
Bluetooth Wireless Audio
Pairing to a Device & Playing Audio
After initial pairing, the unit will stay paired unless unpaired manually by
the user or erased due to a reset of the device. If your device should become
unpaired or you nd it is unable to connect, repeat the steps listed here.
1. Power ON the unit and press Source to select Bluetooth Mode. Press &
Hold the Pair button to begin pairing. The Pairing indicator will begin
ashing quickly. When pairing, remain within 3 feet of the unit.
2. Using the controls on your Bluetooth device, search for and select HTB037
in your Bluetooth settings to pair. If your device requests a password, enter
the default password 0 0 0 0 . If need be, refer to the user’s manual for your
specic device for instructions on connecting Bluetooth devices.
3. When successfully paired, the Pairing indicator will turn solid and an
audible chime will sound. Use the controls on the connected device to
select and begin playing audio.
Aux In (Stereo RCA Inputs)
Requires RCA stereo audio cable (included). When connecting an RCA stereo audio
cable (Red/White), match the colored ports to their corresponding plugs.
1. Connect the RCA stereo audio
cable to the Aux Inputs on the
soundbar and the audio outputs on
a television or other audio source.
2. Power ON the soundbar and press
Source or Aux/Line In to select
Aux In Mode.
3. Audio played through the television
or other source should now be
heard through the speakers.
LINE IN
SOURCE
PAIR
VOL +
VOL –
Line In
Requires a 3.5 mm audio cable (not included).
1. Using a 3.5 mm audio cable, plug into the Line In on the soundbar and the
audio output/headphone jack on an MP3 Player or other audio source.
2. Power ON the soundbar and press Source or Aux/Line In to select Aux In
Mode. The indicator light will display green. Connecting via Line In overrides
the Aux In source. Remove the 3.5mm audio cable to hear Aux In again.
3. Audio played through the connected device should now be heard through
the speakers. Use the controls on the connected device to play, pause, or
skip selected tracks.